|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
View Poll Results: Have You Had A Failure In A Semi-Auto/Revolver That Rendered It Inoperable? | |||
Yes, In A Semi-Auto | 88 | 32.59% | |
Yes, In A Revolver | 44 | 16.30% | |
No, I Have Experienced No Failures In Either | 60 | 22.22% | |
I Have Experienced Failures In Both | 78 | 28.89% | |
Voters: 270. You may not vote on this poll |
|
Thread Tools | Search this Thread |
November 19, 2012, 03:52 AM | #126 |
Senior Member
Join Date: May 19, 2004
Location: Fairbanksan in exile to Aleutian Hell
Posts: 2,655
|
Installed a recoil buffer on a a Browning Hi-Power. Some how during a shooting session it came loose and bound up the slide requiring considerable time to undo. I use recoil buffers on other pistols with no issues.
Watched a friend's .460 S&W cylinder bind up due to a bullet jumping crimp under recoil.
__________________
Stop Allowing Our Schools To Be Soft Targets! http://fastersaveslives.org/ East Moose. Wear Wolf. |
November 19, 2012, 08:34 PM | #127 |
Member
Join Date: April 13, 2012
Posts: 41
|
Failures in Both P and R
GAAH! I meant to vote for "both".
Pistol. Ive been to various ranges here and there more than a few times, and the inevitable is bound to happen. I dont own a semi of any kind but Ive fired them at the ranges that allow rentals. I rented a Glock 17 that jammed twice, and took some rock and rollin to get back into action. And this is within two mags of each other. I can't say "well, it was a rental weapon so it wasnt cleaned", since not every semi owner is committed to cleaning their pieces, so that G17 to me represented the average condition of a semi. And Ive had a Ruger P95 jam on me twice in a session. Revolver. My 649 has always been reliable - except twice. One time the FRONT SIGHT BLEW OFF! The gun was still fire-able except with some major porting on the barrel! S&W fixed it for free though. The other time I bought some super smoky CHEEP 357 mag re-reloads. After a few rounds of five shots the cylinder was jammed shut, and I had to really mess with the release and work the bullet container thingy loose. It took a few minutes and some CLP. Ive fired much fewer rounds in pistols and had more jams, and this doesnt inlucde the MP5 and COlt SMGs that have been available from the rental ranges. Thats it, and I meant to vote BOTH. |
November 20, 2012, 12:12 AM | #128 |
Member
Join Date: November 8, 2012
Posts: 35
|
I had a feeding issue due to a sharp case on a 9mm and my finger was on the slide slowing down the extraction force on a m9 quickly remidied with dropping the mag and pumping the slide .
|
November 21, 2012, 12:03 PM | #129 |
Senior Member
Join Date: September 8, 2011
Posts: 255
|
Semi Auto failure
Had a Taurus 99AF fail on me twice and locked it up very badly (ie you coudl not open the action "normally".
1) One "leg" on a locking lug broke off 2) Barrel developed a "crack" on it's base just ahead of the chamber With alot of effort I managed to to open it up for # 1. With No. 2 had to use a helper to hold a wood block so I could hammer to open the action. Neither load was an overload as I retrieved the spent case (as they wern't able to eject). IMHO it was metal fatigue. I do not load to maximum levels and use cast bullets at low-medium recommended powder levels...I don't use a progressive press and I didn't use the wrong powder. |
November 21, 2012, 03:45 PM | #130 |
Senior Member
Join Date: August 14, 2001
Posts: 1,259
|
Colt Python, case separation. The front of the case lodged itself into the forcing cone.
|
|
|