May 6, 2013, 04:38 PM | #1 |
Junior Member
Join Date: May 2, 2013
Posts: 1
|
H-335 and Red Dot
Anyone have any thoughts on H-335 for .223, 30-30 and 30-06? I am back into reloading after period of rest in which I went sailing.
I'd also like to know of anyone's experience with Red Dot in .357, .38, .38+P, .44 Mag and .45 ACP. The powders are old but pass "The Nose Test." Maddog |
May 6, 2013, 04:57 PM | #2 |
Senior Member
Join Date: December 20, 2007
Location: S.E. Minnesota
Posts: 4,720
|
I use Promo powder in just about everything for light loads. (Promo is a cheaper version of Red Dot) It is very accurate and actually pretty clean-burning if you don't load it down too far. It will work in all of those pistol cartridges, but will not give top performance, especially in the .357 and .44, but how often do you need top performance as long as you still have cheap and accurate? (it's one of those "pick any 2 of the 3" things)
4.5 grains of Promo (Red Dot) with a 148 grain cast wadcutter is a fun load in .357 Magnum.
__________________
"Everything they do is so dramatic and flamboyant. It just makes me want to set myself on fire!" —Lucille Bluth |
May 6, 2013, 05:48 PM | #3 |
Senior Member
Join Date: April 9, 2013
Location: Central PA
Posts: 254
|
I've used H-335 in both .223 and 30-3- with good results. I hunt PA groundhogs and the Hornady V-Max over H-335 and a CCI primer hold under 1/2" @ 100 yards consistnatly. It works well with Sierra Blitzkings (40, 50 and 55 grain). My '94 Winchester likes this powder under 170 gr Sierra FN. Never could get it to work with the Hornady Flex tip (but then, neither did anything else in this rifle!) PM me if you want the exact loads - they're not max BUT I only claim they're safe in MY rifles loaded MY way.
__________________
You Have enemies? Good. That means that you've stood up for something in your life. --Winston Churchill The right to buy weapons is the right to be free. -- A.E. Van Vogt |
May 6, 2013, 06:57 PM | #4 |
Senior Member
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
|
I have used Red Dot in .38 Spcl. while a bit sooty. It worked as well as any others I have used in the accuracy department. POI, and POA lined up out to 25 yards.
I love H335 for use in .223 Rem with 55 grain bullets. It gives great groups even with mixed head stamp brass.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you. |
May 7, 2013, 06:38 AM | #5 |
Senior Member
Join Date: March 8, 2013
Location: Rittman, Ohio
Posts: 2,074
|
Red Dot works fine for light magnum target loads, but is not a magnum powder, nor will it perfom like one.
Last edited by TimSr; May 8, 2013 at 06:37 AM. |
May 7, 2013, 06:47 PM | #6 |
Member
Join Date: August 28, 2010
Location: INDIANA
Posts: 62
|
I've used fquite a bit of Red Dot in 357 behind a 158 gr lswc. about my favorite plinking load in that caliber. A tad dirty, but my old Blackhawk never complains.
|
May 7, 2013, 09:07 PM | #7 |
Senior Member
Join Date: December 20, 2010
Location: New York
Posts: 953
|
I've been loading Red Dot in the .45ACP for years and find it to be a pretty good powder for that in my gun. I also like H335 in the .223 Rem and am currently loading up some test loads using H335 for the .35 Rem, it's a pretty versatile powder.
Stu |
May 8, 2013, 12:57 AM | #8 |
Member
Join Date: August 5, 2009
Location: Grand Rapids MI
Posts: 98
|
I found myself with 8 lbs of Red Dot so to use it up I started loading my 45 ACP using Red Dot. I am using 230 gr Bayau Bullets RN with 4.4 gr of Red Dot with a COL of 1.252. This shoots at 801 FPS out of my Dan Wesson Govt size 1911. Powder might be a little dirty, but overall it works well for me.
|
May 8, 2013, 03:00 AM | #9 |
Senior Member
Join Date: January 10, 2012
Posts: 3,881
|
H335 is all I used for 223 55 gr bullets, very very accurate.
|
Thread Tools | Search this Thread |
|
|