November 5, 2008, 05:35 PM | #1 |
Member
Join Date: August 24, 2008
Posts: 24
|
Rem Model 700 Barrel
Will a model 700 rem barrel in same caliber fit on a rem model 7 action.
|
November 11, 2008, 05:17 PM | #2 |
Junior Member
Join Date: November 11, 2008
Location: Fredericksburg, TX
Posts: 9
|
Should fit fine. Long action calibers won't work too well, though.
|
November 11, 2008, 09:08 PM | #3 |
Member
Join Date: August 24, 2008
Posts: 24
|
Thanks,
They are both 270 wsm. The model 7 is a 22 inch blued and the 700 is a 24 inch stainless. I put a 6mm-270 wsm pac-nor barrel on the 700 which left me with a extra ss barrel. An interesting tid-bit getting 3550 with 62 grains RL 25 and 107 grain sierra, 5/16 3 shot groups. This is being used as a deer sized long range rifle not a target rifle. Thanks again, |
November 11, 2008, 10:13 PM | #4 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
You still have to check the headspace. Bolt-action-barrel fit could be differant even on the same rifle, cal combo.
You swap the barrel, you need to have the head space checked.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
November 11, 2008, 11:44 PM | #5 |
Member
Join Date: August 24, 2008
Posts: 24
|
Thanks,
I will have a smithy do it. |
|
|