The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old June 27, 2011, 04:39 PM   #4326
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
Model 66-1 2 1/2" - 77K8XXX
Made in 1979

Quote:
Model 66 no-dash 4" - 4k93XXX
Made in 1974

The other numbers are inventory parts and assembly numbers

Quote:
Side note: the 66's action is incredibly smooth and it feels like it has received a very good trigger job
The model 66 may well have been tuned up by a commercial pistolsmith or (if it is a police trade-in) by an S&W-trained armorer. Many police agencies sent their armorers to the S&W factory for training courses. All these armorers were at least competent, and some (though they didn't do commercial work and are probably long since retired) were really good.

Last edited by Dave Anderson; June 28, 2011 at 12:18 AM. Reason: Spelling error
Dave Anderson is offline  
Old June 27, 2011, 06:14 PM   #4327
wombathunter
Junior Member
 
Join Date: June 27, 2011
Posts: 1
s&w 5906
S#VCZ5xxx
First gun ever. Will buy the book i promise. Already hooked on them. Already want an older revolver or the 6906. Thanks
wombathunter is offline  
Old June 27, 2011, 07:42 PM   #4328
Oxkey511
Junior Member
 
Join Date: June 27, 2011
Posts: 2
Just found your great forums! I understand that Smith & Wesson has a reference available for determining the date a revolver was manufactured, but since I only have the one S&M .38 that I inherited, I was hoping one of you Senior Members could help me date it. It's a Model 36 .38 special with the serial number 1J21xx. The barrel is less than 2". I read all the previous posts in this thread and didn't see any serial numbers like this. Thanks for any help you can provide.
Oxkey511 is offline  
Old June 27, 2011, 11:40 PM   #4329
netsecsys
Junior Member
 
Join Date: June 25, 2011
Location: Pacific Northwest
Posts: 2
Dave, Thanks for the info!
netsecsys is offline  
Old June 28, 2011, 03:25 PM   #4330
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
It's a Model 36 .38 special with the serial number 1J21xx.
S&W began using the 1J prefix in 1970. Since yours is a relatively low number I expect it was made in 1970.
Dave Anderson is offline  
Old June 28, 2011, 05:46 PM   #4331
micksis86
Senior Member
 
Join Date: June 16, 2009
Posts: 420
Model 16

Hi there, looking for the age of a model 16 serial number BFS34xx.
Also wondering if this is chambered for 32 s&w long or 32 h&r magnum?
Thanks
__________________
Never argue with morons, they will lower you down to their level and beat you with experience.
micksis86 is offline  
Old June 28, 2011, 11:15 PM   #4332
Oxkey511
Junior Member
 
Join Date: June 27, 2011
Posts: 2
Dave Anderson, thank you for the date! From family comments, I had thought it was early '70's or late '60's. Appreciate the quick response. David
Oxkey511 is offline  
Old June 29, 2011, 03:24 PM   #4333
Carson1023
Member
 
Join Date: June 29, 2011
Location: Fayetteville, AR
Posts: 28
I have a Smith and Wesson Model 18. Can anyone help me determine the age and value of this firearm? Serial Number- 161950

Attachment 71645

Attachment 71647

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Carson1023 is offline  
Old June 29, 2011, 03:51 PM   #4334
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
I have a Smith and Wesson Model 18. Can anyone help me determine the age and value of this firearm? Serial Number- 161950
Made in 1952, meaning it is a Combat Masterpiece .22 model. S&W did not begin to use model numbers until 1957 at which time this model was assigned number 18.

Incidentally even though the letter "K" is offset a bit from the numbers it helps with identification to use it as part of the serial number, i.e. K161950.

To wombathunter and micksis86, I'm not ignoring you but as it happens the reference book I have with me at present doesn't have the three letter/four numeric serial numbers. You'll have to wait for laytonj1, who is the real expert on this thread, to check in.
Dave Anderson is offline  
Old June 29, 2011, 04:31 PM   #4335
Carson1023
Member
 
Join Date: June 29, 2011
Location: Fayetteville, AR
Posts: 28
@ Dave Anderson. Thank you very much for the information, it is much appreciated.I have been struggling on finding the age on my own for a while now... Any idea what the value may be?
Carson1023 is offline  
Old June 29, 2011, 05:06 PM   #4336
majordon
Junior Member
 
Join Date: June 23, 2011
Location: Kentucky
Posts: 2
Model 15 Serial Number

Can anyone tell me the year of mfg of a S&W Model 15-1 with serial number
K4434XX?

Thanks for any help.
majordon is offline  
Old June 29, 2011, 05:37 PM   #4337
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
Can anyone tell me the year of mfg of a S&W Model 15-1 with serial number
K4434XX?
1961
Dave Anderson is offline  
Old July 1, 2011, 10:32 AM   #4338
Stumpp2k7
Junior Member
 
Join Date: July 1, 2011
Posts: 2
38 S&W special ctg

can i get some info on this S&W 38 special Serial # V43XXX
Stumpp2k7 is offline  
Old July 1, 2011, 01:42 PM   #4339
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
an i get some info on this S&W 38 special Serial # V43XXX
This is a Military & Police model revolver made during WW II. The V (for Victory) prefix was introduced April 24, 1942 when the previous serial number range reached 999999.

Between April 24, 1942 and August 27, 1945 S&W made 811,119 Victory models. Yours was made fairly early in the series, most likely around mid-1942.

Revolvers made for Britain and other Commonwealth nations (e.g. India) were chambered for .38 S&W. Those for U.S. use were chambered for the .38 Special cartridge. Many were issued to security personnel guarding plants manufacturing war material.

Your revolver has the older style hammer block system. The design depended on spring pressure to return the hammer block to position. It was found that excessive dirt or grease could keep the hammer block from returning, so S&W introduced a new more positive system at s/n V769000. These are stamped with the prefix VS (occasionally SV), the "S" indicating the new safety system.

If older pistols such as yours are to be fired, the hammer block should first be checked for proper function. Personally even then I'd keep an empty chamber under the hammer.

Victory models have become quite collectible. Since a great many were made they aren't hard to find, but they can be hard to find in really good condition, say with 95% original finish.

Though they lacked the high polish and blued finish of commercial revolvers these were very well made. S&W quality did not deteriorate during the war years. The amazing number produced is just another example of the staggering production achievements of American industry during the war years.

Last edited by Dave Anderson; July 1, 2011 at 04:50 PM. Reason: Spelling and grammar correction
Dave Anderson is offline  
Old July 1, 2011, 08:29 PM   #4340
flyguy958
Senior Member
 
Join Date: June 27, 2009
Location: SC
Posts: 200
I'd like to know the birth year of a new purchase. Ballpark on value if you care to gander.
S&W 65-3, Serial AFU4***. 3", factory grips, 96%. Thanks!
flyguy958 is offline  
Old July 2, 2011, 08:11 PM   #4341
Broke Hoss
Junior Member
 
Join Date: July 2, 2011
Location: Abilene, TX
Posts: 2
S&W Mdl 36-1

My future daughter-in-law showed me a Smith & Wesson, Mdl 36-1, Ser# J474xxx, round butt It was given to her by her grandmother. With my limited knowledge I guessed it was from the mid to late 60's. Very clean looking gun. Could you help me out with a more precise year of manufacture?

I appreciate the help.
Broke Hoss is offline  
Old July 2, 2011, 09:58 PM   #4342
grousebuster
Member
 
Join Date: July 2, 2011
Location: sw michigan
Posts: 20
DOB?Please

I don't own the book either and just joined the group.Would anyone care to date my 3 Smiths for me?Thanks. K-38 s/n6606xx;22/32 kit gun (34-1) s/nM92xx;mdl19,s/nk9003xx I shoot all 3 of these regularly and throughly enjoy the quality that Smith and Wesson has put into these hanguns.Seems like the esthetics seen in the earlier firearms are often missing with current manufacture.Maybe I'm just getting old.Thanks for the help. Tom
grousebuster is offline  
Old July 3, 2011, 10:38 AM   #4343
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
My future daughter-in-law showed me a Smith & Wesson, Mdl 36-1, Ser# J474xxx,
The reference book I have at hand (A History of Smith & Wesson by Roy Jinks) indicates 1976.

Quote:
K-38 s/n6606xx;
1966

Quote:
22/32 kit gun (34-1) s/nM92xx
The M prefix was introduced October 1968. The Kit Guns were steady but not huge selling models. This example was most likely made in 1969.

Quote:
mdl19,s/nk9003xx
1969
Dave Anderson is offline  
Old July 4, 2011, 03:57 PM   #4344
iccojo
Junior Member
 
Join Date: July 4, 2011
Posts: 2
S&W Model #4

Can anyone tell me what year my 32 pistol was made? Serial #164xxx
iccojo is offline  
Old July 4, 2011, 04:30 PM   #4345
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
s&w 5906
S#VCZ5xxx
The book has incomplete data for Smith's semi autos after 1993.
That said, The "V" prefix started in 1994 and 5906's were made from 1989 to 1999. So, somewhere around 1994-99.
S&W's customer service can narrow the date down over the phone for free.

Quote:
model 16 serial number BFS34xx.
Also wondering if this is chambered for 32 s&w long or 32 h&r magnum?
1990/91.
Chambering would be 32 H&R magnum but it will also fire the 32 S&W long.
Quote:
S&W 65-3, Serial AFU4***. 3", factory grips, 96%
Late 1984.
Around $350 to $400 for a minty 65. Although there is likely a small premium for the 3" barrel.

Quote:
Model #4 Serial #164xxx
Serial numbers ran from 43406 in 1883 to 282999 in 1909

Jim
laytonj1 is offline  
Old July 4, 2011, 08:24 PM   #4346
flyguy958
Senior Member
 
Join Date: June 27, 2009
Location: SC
Posts: 200
Thanks!
flyguy958 is offline  
Old July 5, 2011, 07:51 AM   #4347
iccojo
Junior Member
 
Join Date: July 4, 2011
Posts: 2
Model #4 32

Thank You for your help, any idea what it would be worth?
iccojo is offline  
Old July 5, 2011, 01:24 PM   #4348
jpzxcv
Junior Member
 
Join Date: July 5, 2011
Posts: 1
serial 29xxx

Hi, a friend's grandfather left him a S&W with a serial 29xxx, it seems to have been used during the spanish civil war 1936-1939, any idea what year is it from and how much could it be sold for? ThanksĀ”
jpzxcv is offline  
Old July 5, 2011, 07:48 PM   #4349
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model #4 32
Thank You for your help, any idea what it would be worth?
2006 pricing shows $150 in good to $400 in excellent.
Quote:
S&W with a serial 29xxx
S&W reused the same serial numbers on numerous models of guns. So, I need more info.
What caliber? How many rounds does it hold? Is it an older break-top action (barrel tips down to reload) or a modern swing out cylinder? Did you take the serial number from the underside of the frames grip butt?
Value on older guns depends heavily on condition... pictures help allot.

Jim
laytonj1 is offline  
Old July 8, 2011, 03:44 AM   #4350
D Thomson
Member
 
Join Date: June 6, 2010
Posts: 24
Can you all help me with the same question, S&W 38 SPL ser. # V137XXX ? Thanks
D Thomson is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:40 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.81027 seconds with 9 queries