|
March 26, 2000, 08:34 PM
|
#1 |
|
Senior Member
Join Date: January 30, 2000
Posts: 145
|
I've been using clean shot powder and the only problem is cleaning the brass case afterwards.I e-mailed the factory with no responce after firing it leaves a greenish buildup on the inside that looks like very old ammo anyone hade this problem and know how to clean ?????????thanks
|
|
|
March 26, 2000, 10:12 PM
|
#2 |
|
Member
Join Date: November 29, 1999
Posts: 41
|
Everyone who uses Cleanshot has that problem. No many replies from the manufacturer either. Cleanshot attacks brass/copper. The cases should be cleaned in NON-ammonia [ammonia attacks copper also]cleaner as soon as possible [the vinegar based windex is good], wiped clean inside and out, dried, and then tumbled. A small soft nylon bottle brush cleans the inside of the cases. Many will still turn dark but you can stop the weakening process indicated by the green oxidation.
Hope that helps. Cleanshot works very well in the larger cases such as 45-70. Joe West ------------------ |
|
|
 |
| Thread Tools | Search this Thread |
|
|
