Looking for a w231 and 125LRN load

Fuzzymaster · June 14, 2009, 06:22 PM

Right now I am shooting 4.0grs w231 w/ 1.10 col. This is with mag primers. It shoots good, and I haven't seen any obvious pressure signs, but does that seem OK?

longranger · June 14, 2009, 06:38 PM

Fuzzymaster,

Hard to know if what you are doing is safe,cartridge you are loading would be helpful

Papucho · June 14, 2009, 09:15 PM

I use 4.2 grains of 231 under a 124 lrn boolit and a COL of 1.110" with very good results but using standard SP primers. Assuming you're loading for 9mm.

flycaster · June 15, 2009, 12:32 PM

Looks O.K. to me. I load 4.0gr. of 231 behind a 125gr. LRN at 1.065". The shape of my 125's needs the shorter oal.

Chuck

June 14, 2009, 06:22 PM	#1
Fuzzymaster Member Join Date: January 6, 2009 Posts: 89	Looking for a w231 and 125LRN load Right now I am shooting 4.0grs w231 w/ 1.10 col. This is with mag primers. It shoots good, and I haven't seen any obvious pressure signs, but does that seem OK?

June 14, 2009, 09:15 PM	#3
Papucho Junior Member Join Date: August 7, 2008 Posts: 8	I use 4.2 grains of 231 under a 124 lrn boolit and a COL of 1.110" with very good results but using standard SP primers. Assuming you're loading for 9mm. Last edited by Papucho; June 14, 2009 at 09:25 PM. Reason: more info

June 14, 2009, 06:38 PM	#2
longranger Senior Member Join Date: November 4, 2008 Location: Buffalo WY Posts: 1,056	Fuzzymaster, Hard to know if what you are doing is safe,cartridge you are loading would be helpful

June 15, 2009, 12:32 PM	#4
flycaster Senior Member Join Date: June 8, 2004 Posts: 289	Looks O.K. to me. I load 4.0gr. of 231 behind a 125gr. LRN at 1.065". The shape of my 125's needs the shorter oal. Chuck