November 22, 1999, 03:06 PM | #1 |
Member
Join Date: February 22, 1999
Location: Austin, TX
Posts: 51
|
I recently acquired an Ishapore 2A #1 MkIII
that has been commercially chopped into something they call the #7 Jungle Carbine. It is a blast to shoot. My question is have any of you had any experience putting a scope mount on one of these? I see some 'no-gunsmith' scope mounts offered online and in Shotgun News. Is one better than the other? Any good or bad luck stories? Did you loose the ability to load the mag from the bolt? Loose the iron sights? Thanks, DanM |
November 22, 1999, 04:30 PM | #2 |
Member
Join Date: October 22, 1999
Posts: 84
|
Dear Friend,
I am having fun with my Ishapores, too. It is nice saving the $ buying .308 instead of .303. I tried the scope mount you are considering and could NOT get it to work. It is held on by two screws that just hold it tight with tension, and no matter how much I tightened them, they would always come loose in about 3 shots. I considered trying to drill into the metal of the barrel so they would seat instead of just having tension, but I just never got around to it. You could try. Yes, it does preclude top loading, but I have never seen clips for the .308 model, anyway. Hope this helps. JP ------------------ Nehemiah 4:18 " ... and each of the builders wore his sword at his side as he worked." |
November 22, 1999, 04:31 PM | #3 |
Member
Join Date: October 22, 1999
Posts: 84
|
P.S. You cannot see the iron sights with the scope and mount on. sorry.
|
November 23, 1999, 10:32 AM | #4 |
Member
Join Date: February 22, 1999
Location: Austin, TX
Posts: 51
|
Thanks for the heads-up John. I take it you
are referring to the scope mount that J&G sales and gibbs rifle sells, which includes rings for $40 or $50? Also, on the stripper clips. I have no personal knowledge of this but have read elsewhere in this forum that either FAL clips or 7.62 NATO clips will work fine. DanM |
November 23, 1999, 05:27 PM | #5 |
Junior member
Join Date: November 19, 1999
Location: Arizona
Posts: 1,920
|
I have had a .308 Ish for several months. It has the rear sight ramp that keeps moving all the time. I am considering installing a scope but just love the idea of stuffing stripper clips to charge the magazine. I am considering, then, a Scout-type arrangement.
Do a search on "Beast-Enterprises" (Geoff Beneze) here in Phoenix who loves the scout concept and has offered to scoutify my Ish. Just a thought. Rick BTW, what to do with that clunky trigger? And what about a cheap source for a bayonet? ------------------ "Congress have no power to disarm the militia. Their swords, and every other terrible implement of the soldier, are the birth-right of an American." Tench Coxe 2/20/1788 [This message has been edited by RickD (edited November 23, 1999).] |
|
|