|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
October 26, 1999, 11:12 PM | #1 |
Member
Join Date: September 5, 1999
Posts: 30
|
I just got the above rifle, and the amount of creep in the trigger is staggering. Even though my Mini-14 is supposedly less accurate, it goes "bang" when you "squeeze" the trigger(very little creep), and I get much better accuracy because of this. I'm not tremendously steady with long arms...and with the AR, I'm inadvertantly swinging the rifle, with the sights moving like a pendulum. I try to squeeze when I believe I'm gonna be on the bullseye...only problem is the inch or so of trigger creep. Yes I know that alot of it is technique, but does anyone know of any "drop-in" parts, or a trigger that will eliminate this creep? I am told that I don't want to buy Bushmaster's DCM two-stage competition trigger", as this is for competition only. The Shorty is being used for home defense/varmint hunting.
Any thoughts would be appreciated!!! Andy |
October 27, 1999, 07:29 AM | #2 |
Staff Alumnus
Join Date: October 12, 1998
Location: Earlington KY
Posts: 2,299
|
Andy, I sell 3 different triggers for for the Ar-15. All three are drop-in. I can recommend all three. If you like, measure your hammer and trigger pin diameters and e-mail me for details. George
|
October 27, 1999, 09:42 AM | #3 |
Senior Member
Join Date: October 5, 1999
Posts: 408
|
I have a Colt Tactical Elite Lower awaiting an Upper- preferably a post ban Colt 16" Lightweight 1x9...
Anyway. I had a JP Trigger installed by Barry at Metalcrafters (search metalcrafters on the web). That trigger is so sweet, my other rifles are jealous of the attention I give it. Breaks around 3lbs. no creep, very little overtravel, literally surprises you when in snaps... IMHO this is the only modification your Bush needs. I love the stock shorty, but the trigger has to go. Watch your groups shrink and firepower increase... |
November 7, 1999, 06:59 PM | #4 |
Junior member
Join Date: November 7, 1999
Posts: 1,516
|
I've installed three JP trigger/hammer combos, all in Shorty carbines. BTW, all Bushmasters take the mil spec "small" pins.
The JP is a drop-in as far as basic intallation goes. You do have to file a little on the part of the trigger assembly that engages the safety. This is well illustrated, and is simple to do. Also, there is a possibility that you might have to file just a smidgen off of the connector. This also is well illustrated in the instructions and is simple to do. I get under 2# trigger pull, with no creep or overtravel. If you want the best, easiest-to-install two-stage, get a Jewell. They're about $175. I get the JP's (hammer and trigger) through Midway for $135. I shoot .5" groups with my Shorty, using Berger bullets. With bulk stuff, I easily shoot an inch or so. [This message has been edited by WalterGAII (edited November 08, 1999).] |
November 7, 1999, 09:19 PM | #5 |
Member
Join Date: September 5, 1999
Posts: 30
|
Thanks for the info. I'm leaning towards the JP product. I'm considering the DCM version with the 4.5lb weight. I was curious as to whether this trigger is too light though for combat/law enforcement use. Can the trigger be adjusted to a higher weight if so desired? Yes I know that this would negate some of the benefits of this system, but all i'm really looking for is a way to get rid of the trigger's creep.
Thanks, Andy |
Thread Tools | Search this Thread |
|
|