August 15, 2006, 07:30 PM | #1 |
Junior Member
Join Date: June 10, 2006
Location: Reminderville, Ohio
Posts: 6
|
Photo Attachments?
Will someone explain how to attach a photo?
|
August 15, 2006, 07:44 PM | #2 |
Senior Member
Join Date: December 31, 1999
Location: Middle Georgia, USA
Posts: 13,198
|
Click on POST REPLY. Go to the bottom of the page. Click on vBcode link. Scroll down and click on [img] link.
|
August 15, 2006, 07:54 PM | #3 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
When you are done typing your message push enter to move the curser down. Then left click on the paper clip on the tool bar at the top. When the manage attachments window opens click on browse. Find the picture you want to upload and left click on it. Left click on the open button and the address should apear in the window next to the browse button. Left click on upload. when it is done uploading right click on the link and then left click on properties. Go to the address and left click and hold the button down. Highlight the whole address from http to the end. After it is highlighted right click in the highlight area and left click copy. Click on the insert image icon in the tool bar. Right click in the window then left click on paste. Click on OK and you are done. It should add the picture to your message. It sounds harder than it is. Good luck,
Rusty
__________________
I don't ever remember being absent minded. |
August 15, 2006, 07:58 PM | #4 |
Senior Member
Join Date: June 4, 2006
Location: West Virginia
Posts: 2,258
|
Thanks Bud, I didn't know about the VBcode area.
Rusty
__________________
I don't ever remember being absent minded. |
|
|