March 1, 2011, 01:15 PM | #1 |
Junior Member
Join Date: March 1, 2011
Posts: 3
|
savage 99 extractor
How does one R&R the extractor on a 99 savage?
|
March 1, 2011, 06:41 PM | #2 |
Member
Join Date: July 13, 2006
Posts: 56
|
R&R ?? Does that mean remove & replace? If that is the case simply use a pin punch to punch out the retaining pin and the extractor can be removed. If you need basic disassembly instructions you can find them here:
http://www.gunreports.com/special_re...fles167-1.html Last edited by Wasper; March 1, 2011 at 06:54 PM. |
March 3, 2011, 06:20 AM | #3 |
Junior Member
Join Date: March 1, 2011
Posts: 3
|
ThanksWasper... that was very helpful.
|
March 3, 2011, 07:10 PM | #4 |
Member
Join Date: July 13, 2006
Posts: 56
|
Glad to help !
|
March 4, 2011, 07:17 AM | #5 |
Junior Member
Join Date: March 1, 2011
Posts: 3
|
Now when I receive the extractor I ordered from Numrich.. I'll be able to install it.
|
|
|