TFO Sights On an XDM

primerman · March 20, 2012, 11:58 PM

I've go an XDM 3.8 and was thinking about buying some fiber optic sights. I was was wondering how hard is it and what kind of tools would it take to change out the sights on this gun. Also what sights would you recommend as I have not settled on anyone just yet. I have little experience with gun repair...

Japle · March 21, 2012, 08:31 AM

Getting the factory sights (especially the rear) off is the biggest problem. A big padded vice, a Nylon drift and a 16 oz hammer make it much easier.

Installing the new TFOs isn't hard. You want to go easy with the hammer when you're tapping them into the dovetails. Use a plastic mallet.

Here's the shooter's view of my XD45.

March 20, 2012, 11:58 PM	#1
primerman Senior Member Join Date: December 23, 2011 Posts: 153	TFO Sights On an XDM I've go an XDM 3.8 and was thinking about buying some fiber optic sights. I was was wondering how hard is it and what kind of tools would it take to change out the sights on this gun. Also what sights would you recommend as I have not settled on anyone just yet. I have little experience with gun repair...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

March 21, 2012, 08:31 AM	#2
Japle Senior Member Join Date: October 12, 2004 Location: Viera, Florida Posts: 1,340	Getting the factory sights (especially the rear) off is the biggest problem. A big padded vice, a Nylon drift and a 16 oz hammer make it much easier. Installing the new TFOs isn't hard. You want to go easy with the hammer when you're tapping them into the dovetails. Use a plastic mallet. Here's the shooter's view of my XD45.