Old style Dillon D-Terminator Scale

RDF · July 21, 2005, 03:44 PM

I lost my instruction. Anybody remenber how to cablrate it?

Ricky Finch

rwilson452 · July 21, 2005, 04:02 PM

1) power it up

2) when it settles press and HOLD the grams/grains "button" untill the 700 flashes

2) press OFF it should now indicate CAL 0

3) place the 700gr test weight on it.

4) wait, it should indicate CAL F

5) remove the test weight

your done.

press zero again and your ready.

you can also place your pan on the scale and press zero and you will read just the charge weight.

zeisloft · July 21, 2005, 05:12 PM

Every so often you just gotta call 1-800-223-4570
~z

RDF · July 21, 2005, 05:36 PM

Thanks

They are going to send me a copy, after I post this they called back and walk me thru it over the phone. Now that's customer service.

July 21, 2005, 03:44 PM	#1
RDF Senior Member Join Date: August 9, 1999 Location: West Liberty, Ky Posts: 133	Old style Dillon D-Terminator Scale I lost my instruction. Anybody remenber how to cablrate it? Ricky Finch

July 21, 2005, 04:02 PM	#2
rwilson452 Senior Member Join Date: June 10, 2004 Location: Tioga co. PA Posts: 2,647	Dillon D-Teminator calibration 1) power it up 2) when it settles press and HOLD the grams/grains "button" untill the 700 flashes 2) press OFF it should now indicate CAL 0 3) place the 700gr test weight on it. 4) wait, it should indicate CAL F 5) remove the test weight your done. press zero again and your ready. you can also place your pan on the scale and press zero and you will read just the charge weight.

July 21, 2005, 05:12 PM	#3
zeisloft Senior Member Join Date: June 7, 2005 Location: Amarillo TX Posts: 419	Every so often you just gotta call 1-800-223-4570 ~z

July 21, 2005, 05:36 PM	#4
RDF Senior Member Join Date: August 9, 1999 Location: West Liberty, Ky Posts: 133	Thanks They are going to send me a copy, after I post this they called back and walk me thru it over the phone. Now that's customer service.