The 'what are you reloading today?' thread - Page 12

hooligan1 · January 24, 2013, 12:05 PM

Getting ready to load and test some 150 E-Tip bullets from Nosler, using RL19. They send the bullets packed with a little yellow piece of paper saying start at min. powder weights and don't go over mid level loads, also this bullet needs to be seated .050 to .090 off lands.
I hope this ain't another goose chase, I can't afford those!!

huh · January 26, 2013, 08:10 PM

just got done loading 500 38 super with brand new starline brass 6.6gr of power pistol pushing a .356 125gr hornady Hap bullet. I really can't wait to blast these off and repeat the process

Huh

Fullthrottle · January 27, 2013, 10:01 PM

Finished reloading some test rounds for .357 magnum and 7.62x54r.

Colorado308shooter · January 27, 2013, 10:20 PM

Today, I did another 20 rounds of 223.

Hornady 55 grain FMJ, 25.3 grains H4895, CCI 400 primer and Remington brass.

I consistently get 2" groups at 100 yards with my Mini-14, using this load.

I've got plenty now for my summer shooting, about 400 rounds of 223 loaded up, ready to go.

rlc323 · January 28, 2013, 09:54 AM

Got the day off because of the rain and thawing yesterday. The ground is an inch of slick mud atop frozen. So we are done until it freezes back up.

Got the TiteGroup out and starting at 4.1 going to put in some 115 FMJ to 9mm Brass.

I am breaking out my old cronograph and if I can get it working I am going to crono some of my 9mm Red Dot loads. I also found some '70s State Police issued Winchester 9mm in the cabinet and 5 of them are going through the crono as well. If there is time the 4.1 grain TiteGroup is going through.

Also slow cooking a pork shoulder in BBQ sauce.

JHLL · January 28, 2013, 10:36 AM

I'll be finishing up a batch of 100 .270 Win, tipped with 130 grain Speer spitzer,
being pushed by 53 grains of H 4350, and primed with Rem No. 9 1/2 LRP.

Ill be getting started on a batch of 100 .380's for the wife, 95 grain Rem FMJRN,
pushed by 3.7 grains of 231, primed with CCI SPP.

If I have time, I need to get started on a batch of 6 MM Rem. tipped with 75 grain Speer HP. 47 grains of H 4350, primed with Rem No. 9 1/2 LRP

oneoldsap · January 29, 2013, 02:51 PM

35 Whelen , 200Gr. Hornadys

hooligan1 · January 30, 2013, 05:00 PM

JHLL, My rifle loves that load, however I use a 130 grain Accubond, and a Barnes TTSX in 130 grain, they shoot almost identical......

gundog5 · January 30, 2013, 06:24 PM

Just finished up loading 80 rounds of 7mm mag. 150 gr.Sierra Game King, 60.2 grains of H4831, CCI lrm primmer. This is a moa load out of my browning a-bolt.

DASHZNT · January 30, 2013, 06:34 PM

Made 18 .44 Magnum rounds of an SD workup load and Im waiting to see what my S&W 629-4 likes the best..

6 - Hornady XTP 300gr over 15.4gr of 2400 w/ CCI Mag Primer
6 - Hornady XTP 300gr over 16.2gr of 2400 w/ CCI Mag Primer
6 - Hornady XTP 300gr over 17.0gr of 2400 w/ CCI Mag Primer

Cant wait to get to the range see the fruits of my labor at work!

DASHZNT

L_Killkenny · January 30, 2013, 09:14 PM

190 - .32 H&R - 2.5grs TiteGroup, 98gr RNFP
50 - .32 H&R - 6.6grs BlueDot, 85gr. XTP
Single Stage

papadude · January 30, 2013, 10:43 PM

40 rds 50 cal. for the S&W 500. 15 gr. Titegroup, 350 gr Hornady XTP, cci large rifle primer.
Nice light load for practice

Colorado Redneck · January 30, 2013, 10:49 PM

327 Fed Mag.
85 Gr. XTP
5.5 gr Unique

This is not a published load. Use at your own risk. In my gun it works great.

Revolver1 · January 30, 2013, 10:58 PM

Gonna' hit the 45acp's hard this weekend. 230gr lead over 3.5grs Bullseye! Good load, no leading. Gotta' break in my new S&W M&P 45c!

jersurf101 · January 30, 2013, 11:42 PM

Loaded 50 rounds of "light" .40 sw loads with unique. 155 grn hp

Ben Towe · January 31, 2013, 01:50 AM

.22-250, 50 grain Nosler Ballistic Tip, H380 powder. Five with 38 grains, five with 38.5. Gonna see what the groups look like when the weather lets up a bit.

huntinaz · January 31, 2013, 12:03 PM

Loaded up some 45 Colt last night, 7.5gr and 8.0gr Unique under a 260gr LSWC. Gotta feed the new Vaquero.

Romeo 33 Delta · January 31, 2013, 01:16 PM

Some .303 Brit, 7.62 X 54R Russian, 7.92 X 57 Mauser. Next up (today) 6.5 X 52 Carcano. Spring is coming!

hooligan1 · February 17, 2013, 11:15 AM

Just finished FL sizing 80 pieces of 7mm Rem Mag, Winchester brass,, it's in the tumbler goin around, I have visions of Long Range Accubonds coursing through my mind.

jj320 · February 17, 2013, 12:57 PM

loaded 50 rnds of .243 last night 100grn hornady interlock over 34grns of 3031

rlc323 · February 17, 2013, 01:37 PM

.380 ACP. With some 20 year old Red Dot. Reloading .380 is a bargain compared to factory ammo prices, but seating the bullets is not as easy as 9mm on my machine. 50 should be enough for today.

Burly · February 17, 2013, 02:05 PM

Working today so my bench is cold and lonely. After rolling up some old faithfuls I loaded up a new batch of .357 on fri, hopefully test em out this week. 125gn gold dots over 2400.

Romeo 33 Delta · February 17, 2013, 02:16 PM

Just finished a run of 350 .22 Hornet and "K" Hornet ... right now about 1/3 the way through a run of 300 .218 Bee and .218 Mashburn Bee.

Spring's coming and I have 23 more boxes of empties to finish before moving on to some wildcat projects. Hurry, Hurry ... tims'

s a wastin'!

ssilence · February 17, 2013, 05:14 PM

Loaded some 9mm Friday night with 124 RN Ranieir, Tula Small Pistol primers, and hogdon titegroup. This was my first reload ever so did 50 total, 10 at 3.8, 3.9, 4.0, 4.1, and 4.2. All on a Lee classic turret press. Shot them today and had no problems. Really liked the way the 3.8 and 3.9 shot. I think I am addicted to reloading now...

Arkmaker · February 17, 2013, 07:52 PM

Just finished hand priming 400 .38 cases with Federal #100's
and 200 9mm with Tula's

May be a small workout for the turret press tomorrow if the weather holds up!

January 24, 2013, 12:05 PM	#276
hooligan1 Senior Member Join Date: July 18, 2010 Location: Independence Missouri Posts: 4,585	Getting ready to load and test some 150 E-Tip bullets from Nosler, using RL19. They send the bullets packed with a little yellow piece of paper saying start at min. powder weights and don't go over mid level loads, also this bullet needs to be seated .050 to .090 off lands. I hope this ain't another goose chase, I can't afford those!! __________________ Keep your Axe sharp and your powder dry. Last edited by hooligan1; January 27, 2013 at 09:28 AM.

January 26, 2013, 08:10 PM	#277
huh Member Join Date: December 18, 2010 Location: Central California Posts: 65	38 super+p just got done loading 500 38 super with brand new starline brass 6.6gr of power pistol pushing a .356 125gr hornady Hap bullet. I really can't wait to blast these off and repeat the process Huh

January 27, 2013, 10:01 PM	#278
Fullthrottle Senior Member Join Date: October 24, 2009 Posts: 280	Finished reloading some test rounds for .357 magnum and 7.62x54r. __________________ When seconds count, why is help minutes away?

January 29, 2013, 02:51 PM	#282
oneoldsap Senior Member Join Date: September 16, 2009 Location: I live in the foot of the Green Mountains of Vermont Posts: 1,602	35 Whelen , 200Gr. Hornadys __________________ Don't forget to have your liberals spayed or neutered !

January 30, 2013, 05:00 PM	#283
hooligan1 Senior Member Join Date: July 18, 2010 Location: Independence Missouri Posts: 4,585	JHLL, My rifle loves that load, however I use a 130 grain Accubond, and a Barnes TTSX in 130 grain, they shoot almost identical...... __________________ Keep your Axe sharp and your powder dry.

January 27, 2013, 10:20 PM	#279
Colorado308shooter Member Join Date: November 11, 2012 Posts: 72	Today, I did another 20 rounds of 223. Hornady 55 grain FMJ, 25.3 grains H4895, CCI 400 primer and Remington brass. I consistently get 2" groups at 100 yards with my Mini-14, using this load. I've got plenty now for my summer shooting, about 400 rounds of 223 loaded up, ready to go.

January 28, 2013, 09:54 AM	#280
rlc323 Senior Member Join Date: January 23, 2013 Location: Forgottonia, Il Posts: 217	Got the day off because of the rain and thawing yesterday. The ground is an inch of slick mud atop frozen. So we are done until it freezes back up. Got the TiteGroup out and starting at 4.1 going to put in some 115 FMJ to 9mm Brass. I am breaking out my old cronograph and if I can get it working I am going to crono some of my 9mm Red Dot loads. I also found some '70s State Police issued Winchester 9mm in the cabinet and 5 of them are going through the crono as well. If there is time the 4.1 grain TiteGroup is going through. Also slow cooking a pork shoulder in BBQ sauce.

January 28, 2013, 10:36 AM	#281
JHLL Member Join Date: March 20, 2011 Posts: 50	I'll be finishing up a batch of 100 .270 Win, tipped with 130 grain Speer spitzer, being pushed by 53 grains of H 4350, and primed with Rem No. 9 1/2 LRP. Ill be getting started on a batch of 100 .380's for the wife, 95 grain Rem FMJRN, pushed by 3.7 grains of 231, primed with CCI SPP. If I have time, I need to get started on a batch of 6 MM Rem. tipped with 75 grain Speer HP. 47 grains of H 4350, primed with Rem No. 9 1/2 LRP

January 30, 2013, 06:24 PM	#284
gundog5 Senior Member Join Date: January 27, 2013 Posts: 116	Just finished up loading 80 rounds of 7mm mag. 150 gr.Sierra Game King, 60.2 grains of H4831, CCI lrm primmer. This is a moa load out of my browning a-bolt.

January 30, 2013, 06:34 PM	#285
DASHZNT Junior member Join Date: July 13, 2012 Posts: 179	Made 18 .44 Magnum rounds of an SD workup load and Im waiting to see what my S&W 629-4 likes the best.. 6 - Hornady XTP 300gr over 15.4gr of 2400 w/ CCI Mag Primer 6 - Hornady XTP 300gr over 16.2gr of 2400 w/ CCI Mag Primer 6 - Hornady XTP 300gr over 17.0gr of 2400 w/ CCI Mag Primer Cant wait to get to the range see the fruits of my labor at work! DASHZNT

January 30, 2013, 09:14 PM	#286
L_Killkenny Senior Member Join Date: February 2, 2007 Location: Iowa Posts: 2,676	190 - .32 H&R - 2.5grs TiteGroup, 98gr RNFP 50 - .32 H&R - 6.6grs BlueDot, 85gr. XTP Single Stage

January 30, 2013, 10:43 PM	#287
papadude Junior Member Join Date: February 29, 2012 Location: southcentral Iowa Posts: 9	40 rds 50 cal. for the S&W 500. 15 gr. Titegroup, 350 gr Hornady XTP, cci large rifle primer. Nice light load for practice

January 30, 2013, 10:49 PM	#288
Colorado Redneck Senior Member Join Date: January 6, 2008 Location: Northeast Colorado Posts: 1,993	327 Fed Mag. 85 Gr. XTP 5.5 gr Unique This is not a published load. Use at your own risk. In my gun it works great.

January 30, 2013, 10:58 PM	#289
Revolver1 Junior member Join Date: January 21, 2013 Location: NY Posts: 150	Gonna' hit the 45acp's hard this weekend. 230gr lead over 3.5grs Bullseye! Good load, no leading. Gotta' break in my new S&W M&P 45c!

January 30, 2013, 11:42 PM	#290
jersurf101 Senior Member Join Date: January 27, 2013 Location: Eastern NC Posts: 553	Loaded 50 rounds of "light" .40 sw loads with unique. 155 grn hp

January 31, 2013, 01:50 AM	#291
Ben Towe Senior Member Join Date: March 6, 2009 Location: Middle Tennessee Posts: 1,128	.22-250, 50 grain Nosler Ballistic Tip, H380 powder. Five with 38 grains, five with 38.5. Gonna see what the groups look like when the weather lets up a bit. __________________ 'Merica: Back to back World War Champs

January 31, 2013, 12:03 PM	#292
huntinaz Senior Member Join Date: September 21, 2010 Location: az Posts: 1,332	Loaded up some 45 Colt last night, 7.5gr and 8.0gr Unique under a 260gr LSWC. Gotta feed the new Vaquero. __________________ "When there’s lead in the air, there’s hope in the heart”- Hunter’s Proverb "Feed me, or feed me to something. I just want to be part of the food chain." -Al Bundy

January 31, 2013, 01:16 PM	#293
Romeo 33 Delta Senior Member Join Date: March 27, 2009 Posts: 315	Some .303 Brit, 7.62 X 54R Russian, 7.92 X 57 Mauser. Next up (today) 6.5 X 52 Carcano. Spring is coming!

February 17, 2013, 11:15 AM	#294
hooligan1 Senior Member Join Date: July 18, 2010 Location: Independence Missouri Posts: 4,585	Just finished FL sizing 80 pieces of 7mm Rem Mag, Winchester brass,, it's in the tumbler goin around, I have visions of Long Range Accubonds coursing through my mind. __________________ Keep your Axe sharp and your powder dry.

February 17, 2013, 12:57 PM	#295
jj320 Senior Member Join Date: January 7, 2013 Location: hobart,in Posts: 119	loaded 50 rnds of .243 last night 100grn hornady interlock over 34grns of 3031

February 17, 2013, 01:37 PM	#296
rlc323 Senior Member Join Date: January 23, 2013 Location: Forgottonia, Il Posts: 217	.380 ACP. With some 20 year old Red Dot. Reloading .380 is a bargain compared to factory ammo prices, but seating the bullets is not as easy as 9mm on my machine. 50 should be enough for today.

February 17, 2013, 02:05 PM	#297
Burly Junior Member Join Date: February 3, 2013 Location: Kalifornia Posts: 6	Working today so my bench is cold and lonely. After rolling up some old faithfuls I loaded up a new batch of .357 on fri, hopefully test em out this week. 125gn gold dots over 2400.

February 17, 2013, 02:16 PM	#298
Romeo 33 Delta Senior Member Join Date: March 27, 2009 Posts: 315	Just finished a run of 350 .22 Hornet and "K" Hornet ... right now about 1/3 the way through a run of 300 .218 Bee and .218 Mashburn Bee. Spring's coming and I have 23 more boxes of empties to finish before moving on to some wildcat projects. Hurry, Hurry ... tims's a wastin'!

February 17, 2013, 05:14 PM	#299
ssilence Junior Member Join Date: January 25, 2013 Posts: 7	Re: The 'what are you reloading today?' thread Loaded some 9mm Friday night with 124 RN Ranieir, Tula Small Pistol primers, and hogdon titegroup. This was my first reload ever so did 50 total, 10 at 3.8, 3.9, 4.0, 4.1, and 4.2. All on a Lee classic turret press. Shot them today and had no problems. Really liked the way the 3.8 and 3.9 shot. I think I am addicted to reloading now...

February 17, 2013, 07:52 PM	#300
Arkmaker Member Join Date: December 20, 2012 Location: Florida Posts: 31	Just finished hand priming 400 .38 cases with Federal #100's and 200 9mm with Tula's May be a small workout for the turret press tomorrow if the weather holds up!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search