Draco SBR stock suggestions

Mrgunsngear · October 27, 2011, 05:33 PM

Well, I finally got my NFA trust set up and am ready to get the next wait started!

I'm going to get a bunch of surpressors and SBR some rifles (maybe get a serbu shorty too just for kicks). I want to SBR my Draco and am looking for a stock that will be easy (relatively speaking, I know I'll have to drill/tap) to install. I'd like it to either be adjustable or have a relatively short LOP since the whole point of a SBR in my opinion is to have a short overall rifle. I'd also like it to be as cheap as possible but still work and be durable. I'm thinking under $200 but less is better. Let me know what you think gents. Thanks in advance.

dsr30 · October 28, 2011, 06:32 AM

I went with this hinge from stormwerks and this AR stock adapter. My plan is to put a MOE or CTR stock on my mini when the form 1 comes back, but this gives me the option to run an Ace stock also, if I don't like the AR stock or find a really cheap Ace stock.

HotGuns · October 29, 2011, 03:21 PM

Here is one that I have built.

It started out life as a Draco.

Magpul stock and grip, stock also folds, with a Midwest Industries forearm.Its an old picture, I have since DuraCoated it.

Mrgunsngear · October 30, 2011, 04:38 PM

What did you use to attach the Magpul stock?

HotGuns · November 5, 2011, 07:12 PM

Here ya go...

http://store.carolinashooterssupply....CHANISM/Detail

http://store.carolinashooterssupply....GA-AK47/Detail

Install the folding mech then install the adapter to it. The stock will screw right to it and that will be the end of that.

Mrgunsngear · November 9, 2011, 12:09 PM

Thank you very much.

The Rage · November 27, 2011, 10:37 AM

We manufacture an easy bolt on adapter to do it right, without welding or drilling-
http://usmachinegun.com/proddetail.php?prod=AKD-RS01

http://usmachinegun.com/proddetail.php?prod=AKU-BSFG

http://usmachinegun.com/proddetail.php?prod=AKU-DRFS

contact me with any questions, thanks

Mrgunsngear · November 27, 2011, 04:11 PM

Oh, that will absolutely be ordered!

Mrgunsngear · December 1, 2011, 09:41 PM

I got the part in today from the above links and I will attest to the quality and customer service. I inadvertently put the wrong address in when I ordered it and the owner worked with me through a series of confusing emails to ensure he would get it right. It really seems to be good stuff.

As soon as I get my stamp, I'll get a AR tube and stock and go to work! Pics will of course be added as well.

October 27, 2011, 05:33 PM	#1
Mrgunsngear Senior Member Join Date: May 13, 2011 Location: Carolina Posts: 3,415	Draco SBR stock suggestions Well, I finally got my NFA trust set up and am ready to get the next wait started! I'm going to get a bunch of surpressors and SBR some rifles (maybe get a serbu shorty too just for kicks). I want to SBR my Draco and am looking for a stock that will be easy (relatively speaking, I know I'll have to drill/tap) to install. I'd like it to either be adjustable or have a relatively short LOP since the whole point of a SBR in my opinion is to have a short overall rifle. I'd also like it to be as cheap as possible but still work and be durable. I'm thinking under $200 but less is better. Let me know what you think gents. Thanks in advance.

October 29, 2011, 03:21 PM	#3
HotGuns Junior Member Join Date: August 28, 2011 Location: Arkansas Posts: 8	Here is one that I have built. It started out life as a Draco. Magpul stock and grip, stock also folds, with a Midwest Industries forearm.Its an old picture, I have since DuraCoated it. __________________ 07/02 FFL Maker of cool things to shoot...

November 5, 2011, 07:12 PM	#5
HotGuns Junior Member Join Date: August 28, 2011 Location: Arkansas Posts: 8	Here ya go... http://store.carolinashooterssupply....CHANISM/Detail http://store.carolinashooterssupply....GA-AK47/Detail Install the folding mech then install the adapter to it. The stock will screw right to it and that will be the end of that. __________________ 07/02 FFL Maker of cool things to shoot...

November 27, 2011, 10:37 AM	#7
The Rage Junior Member Join Date: September 20, 2008 Location: AZ Posts: 13	AR Adapter for Draco AK-47 We manufacture an easy bolt on adapter to do it right, without welding or drilling- http://usmachinegun.com/proddetail.php?prod=AKD-RS01 http://usmachinegun.com/proddetail.php?prod=AKU-BSFG http://usmachinegun.com/proddetail.php?prod=AKU-DRFS contact me with any questions, thanks __________________ FFL/SOT www.usmachinegun.com

October 28, 2011, 06:32 AM	#2
dsr30 Junior Member Join Date: October 28, 2011 Location: VA Posts: 5	I went with this hinge from stormwerks and this AR stock adapter. My plan is to put a MOE or CTR stock on my mini when the form 1 comes back, but this gives me the option to run an Ace stock also, if I don't like the AR stock or find a really cheap Ace stock.

October 30, 2011, 04:38 PM	#4
Mrgunsngear Senior Member Join Date: May 13, 2011 Location: Carolina Posts: 3,415	What did you use to attach the Magpul stock?

November 9, 2011, 12:09 PM	#6
Mrgunsngear Senior Member Join Date: May 13, 2011 Location: Carolina Posts: 3,415	Thank you very much.

November 27, 2011, 04:11 PM	#8
Mrgunsngear Senior Member Join Date: May 13, 2011 Location: Carolina Posts: 3,415	Oh, that will absolutely be ordered!

December 1, 2011, 09:41 PM	#9
Mrgunsngear Senior Member Join Date: May 13, 2011 Location: Carolina Posts: 3,415	I got the part in today from the above links and I will attest to the quality and customer service. I inadvertently put the wrong address in when I ordered it and the owner worked with me through a series of confusing emails to ensure he would get it right. It really seems to be good stuff. As soon as I get my stamp, I'll get a AR tube and stock and go to work! Pics will of course be added as well.