|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 2, 2000, 09:34 PM | #1 |
Member
Join Date: February 19, 2000
Posts: 29
|
I just got my marine magnum and i cannot remove the barrel, is this because of the magizine extension? or am i missing something obvious?
|
July 3, 2000, 06:50 AM | #2 |
Senior Member
Join Date: December 8, 1999
Location: Lexington, KY,USA
Posts: 738
|
Step one, unload gun. Then, Remove clamps holding mag extension to barrel. Now, unscrew mag extension and lift off. Barrel should come off. It is super easy to clean with that coating.
|
July 3, 2000, 09:23 PM | #3 |
Senior Member
Join Date: November 14, 1998
Location: Carlsbad, CA USA
Posts: 356
|
Step 3....
Take barrel and place it in a shipping carton and send to Hans Vang like I did with my MM for his Vang Comp Mod.... 8-) I happen to have an extra 2 round mag extension that is a lot better built than the stock Rem. part if you are interested. Ben |
|
|