|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
September 29, 2012, 11:58 AM | #1 |
Member
Join Date: September 26, 2012
Posts: 25
|
Whats the best gun lubricant/oil
In your opinion what is the best gun lubricant/oil for ARs.
|
September 29, 2012, 12:19 PM | #2 |
Senior Member
Join Date: July 3, 2011
Location: S.E. Texas Gulf Coast
Posts: 743
|
There are those that swear by certain brand lubricants/grease/oils and those like me that use what ever is handy and reasonably priced. I clean and lube liberally my AR's on a regular basis and have never had any sort of failure, glitch or unusual wear in all my years of shooting. Recently I have used
Mobil 1 since I have it on the shelf for my antique automobiles in the barn. |
September 29, 2012, 12:30 PM | #3 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
You're going to get lots of, mostly subjective, responses with that question... anything from the ubiquitous Breakfree CLP, G96 CLP, and Ballistol and even Mobil 1... which a surprising number of people use.
If the idea of a product called Snake Oil appeals... there is one. "Snake Oil". I use FP-10... mostly because I was given a near lifetime supply of the stuff a few years ago. It works fine, but I can't say objectively that it's "the best". Cheers, C
__________________
Shoulder Drive Nicholson Club |
September 29, 2012, 12:57 PM | #4 |
Senior Member
Join Date: January 7, 2010
Location: Houston, TX
Posts: 802
|
Forget "best", pick a horse and ride it.
Automotive lubricants are excellent for guns, after all a car engines idle around 2,000 rpm and I don't know of any pistols that fire at that rate. Even better is ATF. Unfortunately oils migrate giving you a false sense of lubrication. I've been using a very very thin coat of marine/white grease to minimize wear on the rails and outside of the barrel. Being white it doesn't make a mess or stain clothing. In theory the downside to using grease is that exploding particles will also stick to it. But in practical use I haven't seen any extra dirt. You can buy an 8oz tube at the local auto parts store for about $2
__________________
"Socialized Medicine is the Keystone to the Arch of the Socialist State.” -Vladimir Lenin "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them." - Thomas Jefferson (An early warning to Obama care) |
September 29, 2012, 12:57 PM | #5 |
Senior Member
Join Date: May 27, 2007
Posts: 5,261
|
Mobil One 10W-30. $$$ Millions of research dollars have been spend on automotive oils and as a class they are outstanding lubricants. Diesel lubricants even have more additives and I am going to try a bottle eventually. I am of the opinion that gun oils are repackaged industrial oils or plain mineral oil without additives. Not worth spending a premium for.
I also like LSA but after lubing with LSA and leaving a rifle in long term storage, the stuff migrated into the buffer tube and it was a mess to clean out. Proves the stuff lubricates. The real bottom line is that rifles are not that severe of a lubrication envirnoment so anything that is light and works in a more severe application, like cars!, will provide all the lubrication an AR needs. Just keep it wet.
__________________
If I'm not shooting, I'm reloading. |
September 29, 2012, 01:41 PM | #6 |
Member
Join Date: March 25, 2010
Location: Orlando FL
Posts: 73
|
I used M-Pro 7 Gun Oil LPX. It is a synthetic oil with additives that protects against wear, humidity, and moisture, including salt water.
It's the humidity and moisture protection that got me to use it. No rust so far (he said hopefully). |
September 29, 2012, 02:25 PM | #7 |
Senior Member
Join Date: September 9, 2000
Location: San Antonio, TX
Posts: 2,194
|
I use Slip 2000 because I like the smell
http://www.slip2000.com/ |
September 29, 2012, 04:23 PM | #8 |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
I agree with the above posters that you can use just about any lubricant including synthetic motor oil; the main difference you'll see in terms of 'performance' is rust prevention. CLP and Eezox always perform well in corrosion tests while FP10, motor oil, and remoil tend to perform a little 'worse' (still much better than nothing! ).
The key with ARs is to keep them wet. Do a youtube check for "vagisil" and "AR" and you'll see a few that run fine with that as well
__________________
Mrgunsngear Youtube Channel |
September 29, 2012, 04:53 PM | #9 |
Senior Member
Join Date: February 26, 2006
Posts: 737
|
"snot" works very well...equal parts clp, auto trans fluid, and 5w30 mobil 1 syn
|
September 29, 2012, 06:45 PM | #10 | |
Senior Member
Join Date: April 18, 2011
Posts: 540
|
Quote:
__________________
QUANTITATIVE AMMUNITION SELECTION |
|
September 29, 2012, 06:49 PM | #11 |
Senior Member
Join Date: September 3, 2008
Location: North Carolina
Posts: 692
|
Lots of choices will work just fine. I've been using Militec-1 for the last 4 or so years and like it a lot. I have a big bottle of it I got with a coupon, so at the rate I've been going through it I won't even be thinking about buying any kind of lubricant for another 4 or 5 years at least.
I use Ballistol to wipe the outsides of guns down before putting them away in the racks between uses, but not as a working lubricant. |
September 30, 2012, 07:21 PM | #12 |
Senior Member
Join Date: December 29, 2008
Location: East TN
Posts: 2,649
|
I like miltec, if you apply it right it lasts forever and it doesn't collect dust and carbon, makes cleaning a little easier.
Edit: forever being a thousand rounds or so. Sorry for the exaggeration
__________________
Sgt. of Marines, 5th Award Expert Rifle, 237/250 Expert Pistol, 382/400. D Co, 4th CEB, Engineers UP!! If you start a thread, be active in it. Don't leave us hanging. OEF 2011 Sangin, Afg. Molon Labe |
October 3, 2012, 11:07 PM | #13 |
Senior Member
Join Date: May 28, 2007
Location: swamp people
Posts: 539
|
|
October 3, 2012, 11:36 PM | #14 |
Senior Member
Join Date: March 12, 2010
Posts: 1,860
|
I have used rem-oil for years as just a basic lubricant. I have some gunslick grease I use for certain things and I also use mobil-1 synthetic oil for oiling and lubricating purposes. I try and keep it simple and so far I havent had any issues. Everything works as advertised.
|
October 4, 2012, 10:15 AM | #15 |
Senior Member
Join Date: October 3, 2009
Location: NC
Posts: 1,244
|
I've been very pleased with FrogLube grease. It's very slick and stays where you put it.
For example, you can lube the BCG, rails etc. put your AR in the safe and it'll still be ready to go 2 months later. When I used CLP it would run off and the innards of my AR's would be dry. http://www.froglube.com/roothome.htm If Seals use it and Marcus Luttrell recommends it, that's a pretty good endorsement IMO.
__________________
"A man can be destroyed but not defeated". Ernest Hemingway Protect our 2nd Amendment Rights -- Join the NRA Last edited by Coltman 77; October 4, 2012 at 03:50 PM. |
October 4, 2012, 11:46 AM | #16 |
Senior Member
Join Date: March 23, 2010
Location: Tennessee
Posts: 272
|
Lubriplate what slides, CLP what rotates.
|
October 4, 2012, 12:38 PM | #17 |
Junior member
Join Date: July 24, 2011
Location: Saint Louis, Missouri
Posts: 849
|
Bacon grease, hands down, is the best.
You have all the fun of shooting with that enticing bacon aroma!! Just kidding. My favorite is TW25 for the bolt group. |
October 4, 2012, 01:26 PM | #18 |
Senior Member
Join Date: August 10, 2012
Location: Utah
Posts: 232
|
Best grease...?
You might consider auto engine assembly grease. It is used when an engine is rebuilt to lubricate the bearings, valve guides, etc when the engine is reassembled and first started. As such, it MUST hold up to mechanical pressure during the critical seconds (minute?) before the engine oil system floods the bearing journals etal. with the engine oil.
And, it's relatively inexpensive. Or, you could just use Shooter's Choice!
__________________
"Figure Out What You Believe and STAND YOUR GROUND!" Nemo Me Impune Lacessit Lots of Cast Iron to Cook With... and a few defensive firearms, too! |
October 4, 2012, 02:29 PM | #19 |
Senior Member
Join Date: October 18, 2006
Posts: 7,097
|
I use Mobile 1 synthetic grease for the bolt, and any 10w30 in place of a CLP. I know other High Power shooters who do the same thing because it is cheaper and you don't get grease blown back in your face like you can with a "wet" BCG.
Jimro
__________________
Machine guns are awesome until you have to carry one. |
October 4, 2012, 02:51 PM | #20 | |
Senior Member
Join Date: October 19, 2005
Location: Tx Panhandle Territory
Posts: 4,159
|
Quote:
__________________
Rednecks... Keeping the woods critter-free since March 2, 1836. (TX Independence Day) I suspect a thing or two... because I've seen a thing or two. |
|
October 4, 2012, 03:43 PM | #21 |
Senior Member
Join Date: July 1, 2011
Location: Good Ol' Wisconsin
Posts: 327
|
I seriously use Dexron vi on most of the heavy working components of my pistols and rifles. Such as on rails and trigger mechanisms. My thought process (from being a transmission tech) is synthetic trans oil takes heat and pressure that no gun will ever experience and doesn't break down easily, it's blended with detergents for cleaning out the dozens of little passages inside the valve body, and it's not hygroscopic like other lubricants... To me its a win situation. The issue... it really smells like complete crap when it gets hot.
My .02 take it or leave it.
__________________
When I die better bury me deep, two .45s layin' at my feet, An M16 across my chest, tell Chesty Puller I did my best |
October 4, 2012, 05:59 PM | #22 |
Senior Member
Join Date: September 28, 2011
Posts: 342
|
A good coat of CLP works fine in just about any environment, and prevents rust.
Live in a dry climate where the damp air won't rust your weapon? TW-25 B! It's a cream/grease graphite lubricant, so it won't drip no matter how hot it gets. Clean all of the CLP off your rifle with some Hoppe's 9 and put this on all the moving parts. I stole a whole box of it when i came home from iraq the first time. It is phenomenal lubricant. (cons: does not prevent rust on non working parts) |
October 4, 2012, 06:39 PM | #23 | |
Senior Member
Join Date: May 13, 2011
Location: Carolina
Posts: 3,415
|
Quote:
__________________
Mrgunsngear Youtube Channel |
|
October 5, 2012, 06:15 AM | #24 |
Senior Member
Join Date: September 22, 2011
Location: Illinois
Posts: 342
|
The manuals for both of my ARs (RRA & DPMS) both recommend using CLP type lubes. They make no mention of any other type of lubes like oils grease etc. SO for this Break Free is my fav - and Rem oil
|
October 5, 2012, 06:52 AM | #25 | |
Senior Member
Join Date: August 12, 2009
Location: Athens, Georgia
Posts: 2,525
|
Quote:
Bacon grease isn't quite as good as whale oil but it is much more available. |
|
Thread Tools | Search this Thread |
|
|