|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 15, 2014, 06:47 PM | #1 |
Senior Member
Join Date: May 24, 2009
Posts: 405
|
mossberg 500 barrels on a h&r?
i posted on a facebook group recently about looking for a h&r protector barrel. a guy told me that mossberg 500 barrels fit the h&r without mods. is this true? thanks
|
February 15, 2014, 08:50 PM | #2 |
Senior Member
Join Date: November 13, 2013
Posts: 134
|
I'm pretty sure that the H&R Protector/Pardner shotguns are a Remington 870 clone. In that case, an 870 barrel should fit, but NOT a Mossberg barrel as the Remington and Mossberg barrel attachment systems are totally different and incompatible.
I've never owned an H&R Protector/Pardner, so my input is based on a quick Google search (and what I remember reading in gun magazines), but I'm fairly (99.98%0 sure I'm right. Papershotshells |
February 15, 2014, 10:11 PM | #3 |
Senior Member
Join Date: June 24, 2008
Posts: 2,607
|
A Mossberg 500 barrel will NOT fit an H&R Pardner Protector. Different mounting systems.
|
February 15, 2014, 11:34 PM | #4 |
Member
Join Date: February 13, 2014
Location: Minneapolis Area
Posts: 30
|
A Remington barrel will not fit an H&R Pardner pump either. (Some have made a sleeve to allow it.)
The bolt will lock up correctly though...... I don't recommend the sleeve approach.
__________________
Regards, BlueSmoke www.sjhardware.us www.pardnerpump.com www.facebook.com/PardnerProtector |
February 16, 2014, 12:17 AM | #5 |
Member
Join Date: February 13, 2014
Location: Minneapolis Area
Posts: 30
|
A Remington barrel will not fit an H&R Pardner pump either. (Some have made a sleeve to allow it.)
The bolt will lock up correctly though...... I don't recommend the sleeve approach.
__________________
Regards, BlueSmoke www.sjhardware.us www.pardnerpump.com www.facebook.com/PardnerProtector |
February 16, 2014, 01:19 AM | #6 |
Senior Member
Join Date: January 17, 2010
Location: Brooklyn, NYC
Posts: 610
|
The H&R Pardner Pump is a clone of the Remington 870. The barrels will interchange except for the ring that slips over the magazine tube. The H&R is a 5 shot. The Remington in general are either 4 or 6 shot. So the rings are placed in different locations since they have to be at the end of the mag tube to be tightened down by the endcap. To use a 4-shot 870 barrel on a Pardner Pump (can't use the 6-shot barrels) You need to make a spacer that slips over the magazine tube and sits between the endcap and the barrel ring. Endcap, presses on the spacer, spacer presses on the barrel ring and everything works just fine.
Here's a guide: http://www.m4carbine.net/showthread....mp-870-Barrels BTW, Mossberg does manufacture 870 barrels. Made to be used on 870s. A 500 or 590 barrel obviously will not work on an 870 or Pardner Pump. |
February 17, 2014, 03:21 AM | #7 |
Senior Member
Join Date: February 3, 2013
Posts: 1,235
|
Mossberg makes barrels for the Remington 870, but as explained above they cannot be used on the H&R Pardner without a "sleeve".
|
|
|