March 25, 2009, 12:19 AM | #1 |
Junior Member
Join Date: March 12, 2006
Posts: 7
|
Stubborn Pin
I'm trying to get an action apart on an older Remington Woodmaster semi auto, and I'm having trouble getting the 3/32" drift pin out of the operating handle. I've already broke a 1/16" punch and bent another; I'm trying to soak some oil in. I'm affraid to whack it too hard becuase the pin is in the bolt, which is floating in the action, and probably shouldn't be subject to too much abuse.
Any suggestions? Last edited by Brian Dukes; March 25, 2009 at 12:38 AM. |
March 25, 2009, 02:30 AM | #2 |
Senior Member
Join Date: February 4, 2006
Posts: 206
|
Brian: Are you driving it from the top down? You'll not have to worry about damage to the action by driving the pin out.
(edit) 3/32 punch would be better. Last edited by sadsack; March 25, 2009 at 02:38 AM. |
|
|