May 1, 2000, 05:34 PM | #1 |
Senior Member
Join Date: August 18, 1999
Posts: 407
|
Anyone have powder charge datat for the 135grn RS .40 bullet? My Lyman book only goes down to 150grn.
Thanks! |
May 1, 2000, 06:00 PM | #2 |
Senior Member
Join Date: August 9, 1999
Location: New South Wales - Australia
Posts: 605
|
No, sorry -didn't know there was one.What calibre are you loading, a hot 10mm Auto, a lower pressure 40S&W or a rifle ?
Lyman only have their own products listed for obvious reasons, but the 150gn bullet STARTING data {less 10% to be cautious... maybe} should be OK for a lighter projectile as a starting load for experimentation surely? Better check with Hornady Book to be safe..... ------------------ ***Big Bunny*** |
May 1, 2000, 09:06 PM | #3 |
Senior Member
Join Date: January 29, 2000
Posts: 275
|
Universal Clays 7.0-7.5 gn, 1.100 COL 1324fps
Clays 4.2-4.5, 1.100 COL 1071 fps Blue Dot 9.6-11.4, 1.125 COL 1200fps AA5 7.9-8.8, 1.125 COL 1200fps Tom PS, check the Sierra load manual!!!! ------------------ A "Miss" is the ultimate overpenetration! You can never be too rich, too skinny, or too well armed! |
May 1, 2000, 10:58 PM | #4 |
Senior Member
Join Date: February 18, 2000
Location: Anchorage AK
Posts: 237
|
Hi Dave try going to this site and look under IPSC load list. http://home.columbus.rr.com/jmaass
|
May 2, 2000, 01:38 AM | #5 |
Senior Member
Join Date: August 18, 1999
Posts: 407
|
Oops, sorry guys, I should have been more specific.
I'm loading .40 S&W for a G23C and a Berretta M-96FS. I have Bullseye and Win. 231 on hand. Thaks for the help! |
Thread Tools | Search this Thread |
|
|