April 4, 2007, 04:51 PM | #1 |
Member
Join Date: June 21, 2006
Location: Eastern Ohio
Posts: 94
|
Reloading Press
I currently have a press that I seem to no longer to be able to get shell holders for. I currently load 38/357 with this press.
I am looking for a single stage press as this is what i currently have and seems to fit my needs. My question is likes or dislikes on brands, Lee, RCBS Hornady. I probally will only be using it for 9mm and if I start shooting the 45 more - than that caliper also. |
April 4, 2007, 05:16 PM | #2 |
Senior Member
Join Date: May 8, 2000
Location: SLC,Utah
Posts: 2,704
|
Probably get more response in the Handloading and Reloading section.
|
April 4, 2007, 06:16 PM | #3 |
Member
Join Date: July 28, 2005
Location: Houston, Texas
Posts: 57
|
1. There are adapters to put into your press so that you can use new style shellholders.
2. All kinds of old style shellholders are on eBay. 3. I have a fairly old RCBS Rockchucker and a Lee Challenger. The Rockchucker is a great press, but is not so great at catching primers. Neither is the Lee. I hear the Lee Classic Cast with the primer tube coming from the bottom of the ram is super solid and catches all the primers. That's probably what I'd get if I were getting a new one right now. |
|
|