|
June 1, 2010, 12:56 PM
|
#1 |
|
Senior Member
Join Date: April 23, 2007
Location: Pennsylvania, USA
Posts: 1,918
|
1911 blueprints source?
What a good source for blueprints for the 1911A1?
|
|
|
June 1, 2010, 02:07 PM
|
#2 |
|
Junior member
Join Date: February 14, 2010
Posts: 233
|
The US Gov't Printing Office has them for sale and is the same that went with contracts when the gov't was buying them.
http://www.gpo.gov/ You may have to write them to see if they still reprint them as well as other USA Military firearms. AGI - American Gunsmithing Inst - they carry a vast array of prints on CD/DVD www.AmericanGunsmith.com |
|
|
|
June 1, 2010, 03:37 PM
|
#3 |
|
Senior Member
Join Date: September 9, 2006
Posts: 424
|
On-line source
Numrich Gun Parts http://www.gunpartscorp.com/catalog/...spx?show=brand
|
|
|
|
June 1, 2010, 04:28 PM
|
#4 |
|
Member
Join Date: April 4, 2010
Location: Kansas City, Missouri
Posts: 29
|
There are some free plans and drawings here that I just came across.
http://www.cncguns.com/downloads.html
__________________
Darren |
|
|
|
June 3, 2010, 10:35 AM
|
#5 |
|
Member
Join Date: May 17, 2010
Posts: 62
|
Brownells has a big set, I think Jerry Kluusen sells it, part #924850172AC
It's even printed on heavy stock and covered by plastic. Very clear, not like some of the drawings you get where you can't read pin hole diameters etc. John K |
|
|
|
June 3, 2010, 10:46 AM
|
#6 |
|
Senior Member
Join Date: April 23, 2007
Location: Pennsylvania, USA
Posts: 1,918
|
thanks
|
|
|
|
June 6, 2010, 02:14 AM
|
#7 |
|
Senior Member
Join Date: August 9, 2007
Location: Oregoncoast
Posts: 1,793
|
__________________
CNC produced 416 stainless triggers to replace the plastic triggers on Colt Mustangs, Mustang Plus II's, MK IV Government .380's and Sig P238's and P938's. Plus Colt Mustang hardened 416 guide rods, and Llama .32 and .380 recoil spring buttons, checkered nicely and blued. |
|
|
 |
| Thread Tools | Search this Thread |
|
|
