Crossbreed holster draw problem

_Muad'dib_ · August 12, 2010, 01:53 AM

I was thinking of getting a crossbreed hoslter for CCW permit that I should be getting soon. I have a friend though that bought one. He only has good things to say about except for one thing. When he tries to draw he can't get a perfect grip. He says he can't slide his thumb down far enough therefore not getting the grip solidly into the webbing of his finger and thumb. Has anyone else had the same issue?

UltraRick · August 12, 2010, 10:15 AM

I do not have any problem with getting a full grip on a Glock 19. The holster has 8 adjustment holes, your friend needs to experiment to find which ones will work for him to get a full grip. I have mybelt clips with the back hole on the bottom and the front hole second from bottom. YMMV.

Brian Pfleuger · August 12, 2010, 10:29 AM

You can have it "combat cut", which is supposed to improve the gripping process. However, I have no trouble with mine, especially after it "broke in".

Call Crossbreed and speak to them about it. Their customer service is second to none.

kalstrand · August 12, 2010, 05:13 PM

Crossbreed also gives a 2 week satisfaction gurantee. If you decide you don't like it they will take it back.

7jinxed7 · August 13, 2010, 11:27 PM

Buy the DeSantis intruder or Copm-Tac M-tac holsters. I own both and both are cut for a full grip draw. Both are great I wouldn't hesitate to buy either one again. ALthough the Intruder is easier to re-holster and gives a audible click that the M-tac does not.

_Muad'dib_ · August 14, 2010, 12:02 AM

thanks for the suggestions gentleman

August 12, 2010, 01:53 AM	#1
_Muad'dib_ Member Join Date: March 11, 2009 Posts: 68	Crossbreed holster draw problem I was thinking of getting a crossbreed hoslter for CCW permit that I should be getting soon. I have a friend though that bought one. He only has good things to say about except for one thing. When he tries to draw he can't get a perfect grip. He says he can't slide his thumb down far enough therefore not getting the grip solidly into the webbing of his finger and thumb. Has anyone else had the same issue?

August 12, 2010, 10:15 AM	#2
UltraRick Member Join Date: June 14, 2009 Location: Georgetown, IN Posts: 19	Crossbreed I do not have any problem with getting a full grip on a Glock 19. The holster has 8 adjustment holes, your friend needs to experiment to find which ones will work for him to get a full grip. I have mybelt clips with the back hole on the bottom and the front hole second from bottom. YMMV. __________________ Proud NRA Life Member USCCA Member Indiana Lifetime LTCH holder

August 12, 2010, 10:29 AM	#3
Brian Pfleuger Moderator Emeritus Join Date: June 25, 2008 Location: Austin, CO Posts: 19,578	You can have it "combat cut", which is supposed to improve the gripping process. However, I have no trouble with mine, especially after it "broke in". Call Crossbreed and speak to them about it. Their customer service is second to none. __________________ Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley

August 12, 2010, 05:13 PM	#4
kalstrand Member Join Date: August 22, 2008 Posts: 77	Crossbreed also gives a 2 week satisfaction gurantee. If you decide you don't like it they will take it back.

August 13, 2010, 11:27 PM	#5
7jinxed7 Senior Member Join Date: June 3, 2009 Location: no where Posts: 352	Buy the DeSantis intruder or Copm-Tac M-tac holsters. I own both and both are cut for a full grip draw. Both are great I wouldn't hesitate to buy either one again. ALthough the Intruder is easier to re-holster and gives a audible click that the M-tac does not.

August 14, 2010, 12:02 AM	#6
_Muad'dib_ Member Join Date: March 11, 2009 Posts: 68	thanks for the suggestions gentleman