|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 19, 2012, 12:18 PM | #1 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
Remington 700 Stock Upgrade
I'm looking to upgrade my Rem 700 .308. The stock is on the top of my list. I was looking at the chaote ultimate varmiter and thought that was what I was going to get, but after getting a chance to look at one and handle it in person I think I'll pass. It seems to be a well built stock and no doubt better than the stock the gun came with, but I wasn't impressed with the feel or looks. I don't think I would be happy with it long term and I only want to buy 1. Now I'm looking at the HS Precision thumbhole or the Bell & Carlson A5. I don't know of anywhere locally to look at them so I figured I would ask my friends here that have either what their thoughts are. What did you think of the fit and finish? Was there really much difference in accuracy?
Also, if anyone has either of these stocks that they would be willing to part with I am looking to buy. Thanks, Jon |
September 19, 2012, 12:22 PM | #2 |
Senior Member
Join Date: May 6, 2012
Location: Southeast Texas
Posts: 1,670
|
Do you have a heavy barreled 700, or a sporter?
What do you intend to use the gun for? Personally, I just don't like the looks of the HS Precision Thumbhole stocks, I would much prefer one of their stocks without the thumbhole. I do however, like the B&C A5 stock. I got a chance to shoot one with a 700 chambered for .260 Rem, and now it is on my list as an upgrade for my Remington 700 Varmint .308. |
September 19, 2012, 01:19 PM | #3 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,805
|
Neither are my 1st choice, but the B&C will do the same thing for less money in my experince.
|
September 19, 2012, 02:08 PM | #4 |
Senior Member
Join Date: November 12, 2006
Location: Pennsy
Posts: 720
|
http://www.stockysstocks.com/servlet/StoreFront
I have two of the Tactical Medalist#2. I think they are a good value for the money. The #5 is also nice but to pricey for my budget.
__________________
David NRA Benefactor Member Distinguished Rifleman #731 Presidents 100 |
September 19, 2012, 03:20 PM | #5 |
Senior Member
Join Date: October 20, 2010
Location: Pawleys Island
Posts: 1,563
|
Got a straight up plain Jane medalist on my 7mm08 700 Varmint and love it. Didn't cost a whole lot and its heads and shoulders above the factory stock.
|
September 19, 2012, 05:27 PM | #6 |
Senior Member
Join Date: August 6, 2002
Location: SoCal PRK
Posts: 986
|
Myself and a friend both bought the VSSF Rem. 700's in .308 when they first hit the market, using Fed. GMM we could keep our groups at 1/2"-3/4" all day at 100 yards. He bought one of the choate ultimate sniper stocks and we swapped it, dialed it back in and it would shoot one ragged hole all the time.
If I still had the rifle I wouldn't hesitate using that stock, for the price its hard to beat.
__________________
I see the world thru bloodshot eyes Streets filled with blood from distant lies The dogs of war never compromise, No time for rearranging. |
September 19, 2012, 06:16 PM | #7 |
Senior Member
Join Date: December 13, 2009
Location: central Wisconsin
Posts: 2,324
|
I put a Boyds laminated stock on my Ruger 77 Mk II all-weather to replace the ugly paddle stock. I also had a gunsmith pillar and glass bed it and free float the barrel. It was a shooter before but now it's got to be one of the best shooting 77's on the planet. When I'm shooting well I can put them all in one hole at 100 yards from the bench (3 shot group under calm wind and good conditions). This isn't bad for a .300 Win Mag.
http://www.boydsgunstocks.com/Thumbh...ngton-s/57.htm Here is a group when I'm only shooting so-so. Still well under an inch. Last edited by warbirdlover; September 19, 2012 at 06:23 PM. |
September 19, 2012, 06:27 PM | #8 |
Member
Join Date: April 10, 2011
Location: upstate new york near the adirondacks
Posts: 48
|
I have 3 model 700's, and one of them had a scratched up black plastic stock that I wasn't happy with. So I bought a Boyds Thumbhole featerweight stock. I really like it, it came fully inletted and barreled action dropped right in perfect. It looks great, and feels good when shouldered and being laminated its much more rigid than a regular walnut stock.
|
September 19, 2012, 06:30 PM | #9 |
Senior Member
Join Date: December 13, 2009
Location: central Wisconsin
Posts: 2,324
|
That's a sweet looking Remington you have there!! How does it shoot? I had to have my Boyds pillar and glass bedded and the barrel free floated to get it to shoot.
|
September 19, 2012, 10:22 PM | #10 |
Member
Join Date: April 10, 2011
Location: upstate new york near the adirondacks
Posts: 48
|
Warbirdlover, Yours looks pretty nice too. And those are some nice groups from that Ruger. As for mine, I only shot it to sight it in, and the group was about 1 1/4", I 'm sure it will do better, I haven't tried working up a load for it yet, just don't get to the range as often as I would like. I have a mod.700 in 243 that I got recently with the plastic stock that I want to get another thumbhole for it. That one is gonna be pepper like yours.
|
September 19, 2012, 11:04 PM | #11 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
My gun is a 26" heavy barrel varmit. Eventually I would like to get to the 1000 yrd range. So far 350yrds is the furthest I have shot. That was about a 4inch group. Not quite MOA but that was off a bipod with Federal GMM. I'm sure the gun will out shoot me anyways. I've adjusted the factory trigger down on the weight and I have a decent scope so I believe the stock is the weakest link.
|
September 19, 2012, 11:06 PM | #12 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
I like the looks of the Boyds' but for this set-up I would like the tactical look.
|
September 20, 2012, 09:26 AM | #13 |
Senior Member
Join Date: December 13, 2009
Location: central Wisconsin
Posts: 2,324
|
See the link I put in my post for the Boyds stock. Maybe not what you're looking for but it's really nice.
|
September 20, 2012, 06:46 PM | #14 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
@ Warbird ~That is a really nice looking stock, especially for $100.
|
September 20, 2012, 08:28 PM | #15 |
Senior Member
Join Date: December 13, 2009
Location: central Wisconsin
Posts: 2,324
|
Thanks. Actually was $140 since I also had it laser checkered.
And the gunsmith bill was over $200!! |
September 23, 2012, 03:54 AM | #17 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
I ended up ordering the Medalist A2. I figured I can space the recoil pad if I want to lengthen the LOP and a buddy of mine said he has made several of the adjustable cheek pieces if I want one. With the $200 I saved I ordered a PTG magwell and an AICS 5 rnd mag. Now the wait is on...
|
September 24, 2012, 05:40 PM | #18 |
Senior Member
Join Date: November 30, 2008
Posts: 417
|
I have a B&C Medalist A5, glass-bedded, on my Rem 700 SPS-Varmint in .308. It is comfortable, the weight soaks up recoil and I've been totally pleased with it. I got mine from Stockys' stocks. Excellent customer service. Good prices.
FH PS-I've put B&C Medalist Sporter stocks on a Rem 700 SPS SS in .308 and a Rem 700 XCR II in .375 H&H. The latter got the Weatherby-style stock with Monte Carlo and cast-off to help with recoil. Delighted all the way around. |
September 24, 2012, 07:19 PM | #19 |
Senior Member
Join Date: April 1, 2008
Posts: 241
|
I put a B&C Medalist A2 on my 700 AAC-sd which seems to perform very good. The comb of the stock seems like it sits pretty high cause I have to cram my cheek into the comb in order to get my eye low enough to see through my scope. The only rings to fit at the shop where I bought the gun were DNZ one piece base/ring combo and the scope is a Weaver t36. I'm guessing, what I need is a little taller set of rings shooting from the bench. I'm not sure, if he put low or medium rings on cause he through the package away. I hate to have to get different rings and maybe a picatinny rail after paying $50.00 for the DNZs but, may not have a choice.
|
September 25, 2012, 12:02 AM | #20 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
Should I expect much difference in accuracy with a stiffer stock?
Anyone have any advice on doing the ADL to DBM conversion? Thanks, Jon |
October 2, 2012, 08:46 AM | #21 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
It's all together now.
The gun and stock paired up great, I wish I could say the same for the stock and bottom metal. It ended up being alot more "inletting" than I was expecting to get the PTG bottom metal to fit into the stock. The majority of the reviews led me to believe it was going to be 20-30 minutes with a file to fit it up. That was not the case. The bottom metal is wider, longer and thicker than the original piece. Luckly I have access to a mill. Doing that all with a file & dremel would have been very trying on my patience. I opened up the stock a little bit all the way around side to side, took the front side about 3/16" further toward the forearm and the back side 3/8" further and .200" deeper. Now it is a nice snug fit and functions nice. It looks like a new gun. Although it was a little more work than I had anticipated I am glad I did it.Vise.jpg
New Stock 1.jpg |
October 2, 2012, 09:08 AM | #22 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,242
|
Nice looking work on the stock. Did you skim bed the action? The reason I ask is I think even with the bedding block your rifle will benifit from a skim bed job. I know my Savage rifle did, every time I took it in and out of it's HS stock to work on it my POI would shift a little bit. Since I had it skim bed when I torque it down t still shoots same POI as it did before.
__________________
NRA Life Member |
October 2, 2012, 08:07 PM | #23 |
Member
Join Date: September 25, 2010
Location: Columbus, Ohio
Posts: 33
|
I haven't yet. Haven't even got to shoot it yet. That is in the plans though. Any recomendations on a good bedding kit?
|
October 2, 2012, 09:29 PM | #24 |
Senior Member
Join Date: January 30, 2006
Posts: 1,433
|
Not cheap, but before you make a decision you should check out Brown Precision stocks.
__________________
Vietnam Veteran ('69-'70) NRA Life Member RMEF Life Member |
|
|