The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old May 26, 2000, 12:37 PM   #1
sarge83
Senior Member
 
Join Date: February 17, 2000
Posts: 426
Just picked up a ruger 10/22 stainless and was wondering if any of the high capacity clips were worth the trouble and what is their usual cost?
Thanks in advance.
sarge83 is offline  
Old May 26, 2000, 01:26 PM   #2
fed168
Senior Member
 
Join Date: March 15, 2000
Posts: 1,040
The last gun show I went to hi cap 10/22 mags were godawful expensive. The prices started at $50 +. For that cost you could get the hot lips (?) set up where one can attach four ten rounders together. Or buy a couple Ruger ten rounders and enjoy. My two cents...
fed168 is offline  
Old May 26, 2000, 04:29 PM   #3
hksigwalther
Senior Member
 
Join Date: November 18, 1998
Location: NE OH, USA
Posts: 3,198
My 10/22s have always worked well with Butler Creek Hot Lips. A friend and I, as I have mentioned on other posts, had tried all of the other hi-caps a few years ago (before the restriction) in determining the best. USAs, Eagles, Ramlines, etc. were not even close compared to how well the BCs worked. Have never tried BC's metal lipped ones, though. The 25 round BCs I've seen anywhere between $50-$100. I've seen ads for 50 round Ramlines for $125!

Now these are my 10/22s (4 different unmodified receivers and bolts + 1 more - my friend's 10/22). I don't know how well the BCs or others will work in other 10/22s. It's ashame they are no longer cheap as you could then do your own trials on your gun.

------------------
- Ron V.
hksigwalther is offline  
Old May 28, 2000, 01:18 AM   #4
dalpra
Senior Member
 
Join Date: March 4, 2000
Location: Colorado
Posts: 187
Stick with the Butler Creek Hot Lips for hicap mags. Be prepared to pay $60+. As an alternative, buy the gizmo which connects 2 or 4 Ruger factory mags together. I bought a 2-mag version for $10 at a gun show. It's not exactly a hicap, but it saves a little time.
dalpra is offline  
Old May 28, 2000, 11:41 AM   #5
hksigwalther
Senior Member
 
Join Date: November 18, 1998
Location: NE OH, USA
Posts: 3,198
Oh, and get the Butler Creek mag loader to. It will load any 10/22 mag, hi-cap or not. This will save your thumbs. The part of the feed lips that hold the rounds in the mag in the Hot-Lips have very sharp corners. When you load by hand, these corners will start to dig into your thumb and if your thumb isn't callused or thick skinned, it will become bloody.

------------------
- Ron V.
hksigwalther is offline  
Old May 29, 2000, 08:31 AM   #6
MikeFromIowa
Member
 
Join Date: May 13, 2000
Location: Darn Near Canada
Posts: 46
I can only echo what dalpra and hksigwalther have said, although I have found that if you get an extended mag release you can use factory mags almost as fast as a high cap. I also recently found a source for reasonably priced 30 and 50 round mags. email me if you're interested.
--Mike From Iowa
MikeFromIowa is offline  
Old May 29, 2000, 01:03 PM   #7
Onslaught
Senior Member
 
Join Date: November 11, 1999
Location: GA
Posts: 1,749
So far, these replies are right on the money. I have one eagle 50, and 2 BC 25's. The eagle worked for a couple years, and then stated malfunctioning. But the BC's are still going strong. I will say though, that I never use the BC's. I just get tired of loading them. I'm sure that if I ever broke down and bought one of the BC speedloaders, life would be easier, but I've still got stuff to buy for my AR, my M1a, and my HK. When I've finished all the rest, maybe I'll go back and buy that last piece of equipment for my first, almost forgotten love... my 10/22.
Onslaught is offline  
Old August 15, 2005, 02:15 PM   #8
Waycon
Junior Member
 
Join Date: August 15, 2005
Posts: 1
The best clips I have found to work with the 10/22 were made by Eagle Intl. Before the ban I would buy these 30 rd clips from WalMart, no lie, for $8.89.
Before Eagle I used a Mitchell Arms 50 rd wind-up tear-drop clip. The clip had a die cast metal follower and lips

Mitchell Arms
114 So Geneva St
Ithaca N.Y. 14850
607-273-5895

Eagle Intl.
5195 West 58th Ave
Arvada CO 80002
303-426-8100
Waycon is offline  
Old August 15, 2005, 02:38 PM   #9
Logs
Senior Member
 
Join Date: November 26, 1999
Location: BLUEGRASS STATE KY USA
Posts: 1,780
10/22 mags

One more fan of Eagle mags. I bought some 2 weeks ago at Whittaker Guns in Owensboro, KY for $9.99 each. I have seen them on ebay for around $20, even though she are a banned item for ebay.

Check out www.whittakerguns.com they have the deal on 30 rounders. As for quality of Eagle mags, I have about 10 of them. Sent one in since I was having problems with it feeding, week later BRAND new one was returned to me. Great Service.
Logs is offline  
Old August 17, 2005, 08:42 PM   #10
shooter_john
Senior Member
 
Join Date: December 11, 2002
Location: ALABAMA
Posts: 1,472
I have seen 25 rounders at local sporting goods store ( ACADEMY SPORTS) for 19.99. Also have seen several at less than 25.00 in Cheaper than Dirt and the Sportsman's Guide. Unfortunately I don't remember what brand any of these were. I bought a handful of Butler Creek 25's at a yard sale a couple years ago for a quarter each!!! but I doubt you'll have that kind of luck.
__________________
TROTAC.com
shooter_john is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.09854 seconds with 8 queries