August 3, 2012, 05:18 PM | #1 |
Junior Member
Join Date: August 3, 2012
Posts: 2
|
made by WHO?
Hi Guys, I was hoping to learn a bit about a newly inherited gun. The most useful info i have found so far got me to YOU. It's a dbl barrell side by side tho tops of the barrels are stamped: "A. GOBIN ARQ R(underlined) Paris" on one and " I08 (or maybe 108) B o(underlined)Magenta" on the other. Marks on the underside of the barrels are "acier cockerill", " AC over JB" in parantheses, choke specs, then "D=65/18.7". Marks are"star over N", "deer over P.V."(maybe a rabbit), then a small "AV" or possibly "M", a vertical line over a triple triangle(looks like a blacksmiths hammer), cursive"EL", "16" over "C" inside a diamond, "E" over "LG" over"*" inside a crowned circle below a star. Age, guage, and ballpark value would be greatly appriceated. Thanks, Dan
|
August 3, 2012, 06:55 PM | #2 |
Senior Member
Join Date: November 15, 1999
Location: Clifton, Colorado USA
Posts: 724
|
I believe you're describing Begian proofmarks.
http://www.picturetrail.com/sfx/album/view/17575181 It looks like you have a 16 ga. made sometime from 1898-1924. Maybe someone else can pinpoint the manufacturer. Steve
__________________
After today, its all historical |
August 3, 2012, 06:55 PM | #3 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Made in Belgium (ELG proofs), made of steel (as opposed to iron I suppose) from the Cockerill-Sambe metalworks (ouside of Liege, Belgium), sold by A. Gobin, Arqibusier (shotgun maker/dealer) in Paris, France. 16 gauge, 2-9/16" chambers, cylinder choke. The thingy that looks like a hammer (upside-down) is the Perron, a breeching proof. Crown over N is an inspector's mark. Made in 1976 (o date mark?) or 1936 (o date mark). M* is the mark of Scorpion Maurice (1976) or Couchant Louis (1936), the controller of proofs during that period. Proofed for smokeless powder (crown over PV).
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services Last edited by Scorch; August 3, 2012 at 07:05 PM. |
August 3, 2012, 07:25 PM | #4 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
Hi Dan, welcome to the Asylum.
Ain't it great that someone would take the time to dig up all that hard to find information for you? If you want to pay the kindness forward, get yourself, or better still a young person, an NRA membership. Just a suggestion. ya' understand. Cheers, C
__________________
Shoulder Drive Nicholson Club |
August 4, 2012, 01:00 PM | #5 |
Junior Member
Join Date: August 3, 2012
Posts: 2
|
Steven, Scorch, thank you very much! Creeper, I will at the first opporotunity!
________________________________________________________________ If ye love wealth better than liberty, the tranquillity of servitude better than the animating contest of freedom, go home from us in peace. We ask not your counsels or arms. Crouch down and lick the hands which feed you. May your chains set lightly upon you, and may posterity forget that ye were our countrymen. -Samuel Adams |
August 4, 2012, 04:30 PM | #6 |
Senior Member
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
|
Good on ya'.
C
__________________
Shoulder Drive Nicholson Club |
|
|