|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
August 24, 2013, 08:36 PM | #1 |
Member
Join Date: October 28, 2012
Posts: 41
|
Looking For Multi cal Suppressors
I have three rifles all in different calibers, .308, .22, .556... I would like a suppressor that will work on all these guns... I looked around and saw a few different models, but I want someone else's opinion. It's ok if it's just a 308 and 556, but also 22 would be a big bonus.
Thanks |
August 24, 2013, 09:27 PM | #2 |
Senior Member
Join Date: September 5, 2010
Location: McMurdo Sound Texas
Posts: 4,322
|
Can you clarify: Do you want a single suppressor that fits on all three of those bores listed, or the same model of suppressor but 1 supressor for each caliber?
__________________
Cave illos in guns et backhoes |
August 24, 2013, 09:27 PM | #3 |
Senior Member
Join Date: May 6, 2012
Location: Southeast Texas
Posts: 1,670
|
Looking For Multi cal Suppressors
The problem with using a .30 cal can on a .22 LR is that buildup is a problem with most all .22 ammo and most high power rifle suppressors are not made to be disassembled.
If you will take a can that will work for 2 of the 3, then any .30 cal can will work (provided the threading matches the host rifles). |
August 25, 2013, 12:59 AM | #4 |
Senior Member
Join Date: April 19, 2012
Location: Western PA
Posts: 3,829
|
Like allaroundhunter said; you're really looking for at least two cans here: a .30 caliber can and a .22 can.
Most center-fire rifle cans are sealed, meaning you can't take them apart: You don't need to clean a center-fire rifle can and they work better if they're sealed and can't be disassembled. The pressure is high enough that almost all the carbon fouling is blown right out of the can, and the thin layer that remains helps protect the baffles from heat and pressure and makes the can last longer, but this thin layer of carbon doesn't get too thick because of the huge amount of pressure going through the can with every shot. But if you shoot .22 through it, the lead will build up and be almost impossible to remove. Eventually it will get thick enough to affect performance and it's almost impossible to remove the lead from inside a sealed can. This is why most people don't shoot .22 out of their rifle cans. My favorite .22 can is the Spectre 2: super durable (rated up to 5.7), super quiet, and super easy to clean (not quiet as easy as the Sparrow, but with much less first round pop). And my favorite rifle can is the AAC SDN-6. It's a full-auto rated .308 can that also works really well on 5.56. It's also optimized for subsonic 300 blackout if you ever decide to go that route. It's a quick-attach can so with the right mounts on your rifles you can switch it easily from a .308 rifle to a .223 (those rifles almost always have different thread patterns, so using a direct-thread can would require an adapter on the .223 rifle).
__________________
0331: "Accuracy by volume." |
August 25, 2013, 03:46 PM | #5 |
Senior Member
Join Date: September 18, 2011
Location: Wisconsin
Posts: 184
|
I would avoid shooting .22 through a center fire can.
I am very happy with my setup of a silencerco sparrow for .22 and 5.7x28, a 762-SDN-6 for rifle (5.56, 30 cal and 300 blackout) and a Ti-rant 45 for pistol (9mm and .45). |
August 27, 2013, 06:40 AM | #6 |
Senior Member
Join Date: May 12, 2005
Location: Georgia, USA
Posts: 3,336
|
I don't own a .22 and know nothing about suppressing them.
Finding a .308 suppressor that works well with your .223 is fairly easy these days... I run my Smith Enterprise Wind Talker M14DC 0.30 caliber sound suppressor on .308, 7.62x39 and .223 caliber rifles. All I did to make this possible was install the correct DC Vortex flash eliminator or suppressor capable Good Iron muzzle brake on the host rifle. I hope that helps. .
__________________
The History and Development of the M14 EBR Last edited by SR420; August 27, 2013 at 12:42 PM. |
August 27, 2013, 12:35 PM | #7 | |
Senior Member
Join Date: January 8, 2008
Posts: 803
|
Quote:
The biggest realistic issue with a .30 cal can on a .22 LR is usually the weight, and the fact that most .22 barrels will have excessive camber because of that weight. All firearms have carbon buildup. The fact is that even if you pumped a lot of .22 LR rounds through a .30 suppressor, you will not get anywhere near enough buildup to have any detrimental effects on that suppressor, and after just a few rounds of hi pressure and hot .30 cal gas pushing through the baffles, the can is going to get cleaned out (as good as it would be anyway).' That being said, get a dedicated .22 can and use a .30 cal centerfire can for your .308 and 5.56. |
|
August 27, 2013, 02:08 PM | #8 | |
Senior Member
Join Date: June 29, 2013
Posts: 189
|
Quote:
|
|
August 27, 2013, 03:38 PM | #9 |
Senior Member
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 3,006
|
schmellba99, you're telling me that the manufacturers of these suppressors are telling us not to ever fire .22 rimfire through sealed centerfire cans because of an internet myth? Ok.
__________________
"9mm has a very long history of being a pointy little bullet moving quickly" --Sevens |
August 27, 2013, 05:35 PM | #10 | |
Senior Member
Join Date: April 19, 2012
Location: Western PA
Posts: 3,829
|
Quote:
__________________
0331: "Accuracy by volume." |
|
|
|