The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old February 1, 2013, 10:18 PM   #1
eldermike
Senior Member
 
Join Date: January 24, 2013
Location: NC
Posts: 545
38 special/special

Many years ago I took some 38 special cases and drilled and C-bored the heads to be press fit for a shotgun primer. I could pop them out with an ink pen and press new ones in with my fingers. I then set up a turret lathe to make some nylon hollow base bullets that were a slip fit into a sized case. They came out about .353 and weigh little to nothing.

They would shoot through a carboard box so I made targets by putting a box inside a box giving me 4 layers and that would stop the bullets in the center.

I taught my kids to shoot handguns in the garage with these things. Another added benifit was getting all the lead out of my guns.
Attached Images
File Type: jpg 38realspecial.jpg.jpg (187.2 KB, 77 views)
File Type: jpg 38realspecial1.jpg.jpg (60.4 KB, 68 views)
File Type: jpg 38realspecial2.jpg.jpg (57.4 KB, 65 views)
eldermike is offline  
Old February 1, 2013, 10:26 PM   #2
Lost Sheep
Senior Member
 
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
Nifty

You can do the same with wax bullets. Make the bullets by softening the wax and cutting, cookie-cutter style, the bullets out of a shallow pan.

Or, you can get a bullet mold and make cast bullets out of hot glue. With a little lube in the lube grooes, I'll bet they would zip right along.

Lucky you to have a lathe just laying about, wanting something to do.

Lost Sheep.
Lost Sheep is offline  
Old February 1, 2013, 10:30 PM   #3
eldermike
Senior Member
 
Join Date: January 24, 2013
Location: NC
Posts: 545
They were a lot of fun. Was cleaning up in my reloading room and found one. Now I just need to find the rest of them.
eldermike is offline  
Old February 1, 2013, 10:31 PM   #4
eldermike
Senior Member
 
Join Date: January 24, 2013
Location: NC
Posts: 545
Hot glue gun bullets is a neat idea.
eldermike is offline  
Old February 2, 2013, 07:16 AM   #5
gwalchmai
Senior Member
 
Join Date: December 7, 2001
Location: outside the perimeter
Posts: 333
Quote:
Another added benifit was getting all the lead out of my guns.
Are you using lead-free primers?
gwalchmai is offline  
Old February 2, 2013, 07:32 AM   #6
eldermike
Senior Member
 
Join Date: January 24, 2013
Location: NC
Posts: 545
Am I using lead free primers? No, but I shoot cast bullets by the lb and that lead can be difficult to remove.
eldermike is offline  
Old February 2, 2013, 08:11 AM   #7
gwalchmai
Senior Member
 
Join Date: December 7, 2001
Location: outside the perimeter
Posts: 333
Quote:
Am I using lead free primers? No, but I shoot cast bullets by the lb and that lead can be difficult to remove.
Shooting normal primers in an enclosed space can expose you to a lot of lead styphenate, which is readily absorbed. Not too big a deal for us oldsters but it should be avoided by young people.

You may consider slugging your bore and having your boolits cast to that size to reduce or even prevent leading your barrel.

Good tip about the plastic bullets, btw.
gwalchmai is offline  
Old February 2, 2013, 01:15 PM   #8
Mike Irwin
Staff
 
Join Date: April 13, 2000
Location: Northern Virginia
Posts: 41,367
Speer still offers, I think, plastic bullets and cases for practice.

I used to have some in .38 and used to shoot them in my basement when I was a kid.
__________________
"The gift which I am sending you is called a dog, and is in fact the most precious and valuable possession of mankind" -Theodorus Gaza

Baby Jesus cries when the fat redneck doesn't have military-grade firepower.
Mike Irwin is offline  
Old February 3, 2013, 02:57 AM   #9
OkieCruffler
Senior Member
 
Join Date: July 9, 2001
Location: Denison Texas on the banks of Texhoma
Posts: 1,556
Saw a fella once who loaded primer only loads with those foam ear plugs for his Contender, can't remember if it was a .357 or .44 brass. He would shoot rubber ducks in his pool. I always wanted to try that.
__________________
John A. Monroe, Never Forgive, Never Forget, Blood Pays Blood
OkieCruffler is offline  
Old February 3, 2013, 05:14 AM   #10
paulo57509
Member
 
Join Date: January 10, 2011
Posts: 18
http://www.speer-bullets.com/product...g_bullets.aspx
paulo57509 is offline  
Old February 3, 2013, 07:29 AM   #11
LE-28
Senior Member
 
Join Date: September 24, 2012
Location: North Carolina
Posts: 758
Quote:
He would shoot rubber ducks in his pool. I always wanted to try that.
That's pretty low shooting your kids rubber duckie. (sounds like a lot of fun!)
LE-28 is offline  
Old February 3, 2013, 11:35 AM   #12
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 10,442
I used to use those plastic cartridges with primers.
But that was before airsoft / pellet guns became so realistic.
Much cleaner and accomplishes the same thing.
Especially now with primers so hard to find and expensive.
__________________
Walt Kelly, alias Pogo, sez:
“Don't take life so serious, son, it ain't nohow permanent.”
g.willikers is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.04218 seconds with 9 queries