|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 23, 2013, 02:48 PM | #1 |
Senior Member
Join Date: June 29, 2009
Location: Kentucky
Posts: 153
|
Steyr-Hahn extractor question
I have a pair of WWI Steyr-Hahn m1912 pistols that I have a problem with. One is strictly a parts gun at this point for the other and I need to change the extractor out but I cannot figure out how to remove it.
Does anyone know of how to change the extractor on this pistol as well as a place to find a few parts for it? Thanks in advance.
__________________
In Hoc Signo Vinces |
January 23, 2013, 04:14 PM | #2 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I can't help with parts except to suggest www.gunpartscorp.com as a possible source.
As for removing the extractor, it is very easy. Using a non-marring tool, like the bullet point of a rifle cartridge, push down and forward on the curved part of the extractor that is just behind the clip guide. The extractor will pop right out. But since the extractor retains the firing pin, be careful that the firing pin doesn't fall out and be lost. Jim |
January 23, 2013, 06:54 PM | #3 |
Senior Member
Join Date: June 29, 2009
Location: Kentucky
Posts: 153
|
Thanks for the help. I got the extractor changed out from one pistol to the other. The one I needed to change was pretty much worn completely down.
However the pistol is still having the same problem. I will load the pistol and the slide will feed the round until the slide gets to be about 1/16" out of full lockup and then it will not budge. I have to force the slide back to get the round out of the chamber. Any ideas as to what might cause this?
__________________
In Hoc Signo Vinces |
January 23, 2013, 07:00 PM | #4 |
Senior Member
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,832
|
First guess would be it's chambered for a 9x19 Luger rather than the 9x23 Steyr. Does it have Wehrmacht stamps?
__________________
I used to love being able to hit hard at 1000 yards. As I get older I find hitting a mini ram at 200 yards with the 22 oddly more satisfying. |
January 23, 2013, 08:59 PM | #5 |
Senior Member
Join Date: June 29, 2009
Location: Kentucky
Posts: 153
|
It doesn't have the Wehrmacht stampings.
__________________
In Hoc Signo Vinces |
January 23, 2013, 09:53 PM | #6 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
The barrel could still be in 9mm P even if the slide is not marked "08" or the frame doesn't have the eagle. It is easy enough to remove the barrel and check the chambering or look for the eagle/N.
Jim |
January 23, 2013, 11:35 PM | #7 |
Senior Member
Join Date: June 29, 2009
Location: Kentucky
Posts: 153
|
I will have to check the chamber and see what I find out. I will try and take some photos to put on here in the next day or so.
__________________
In Hoc Signo Vinces |
January 24, 2013, 12:00 PM | #8 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
Which ammo are you using? The clips will work with either, but all the ammo I have seen for sale in clips has been 9mm Steyr.
Jim |
Thread Tools | Search this Thread |
|
|