The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old September 26, 2012, 06:01 PM   #1
rcase1234
Senior Member
 
Join Date: September 6, 2012
Location: Michigan
Posts: 407
New Remington 1100?

Hey everybody! Today at gander mountain I saw a new Rem 1100 for $700. Are the new 1100s as nice and reliable as the old ones? Do they shoot 3" shells or still 2.75"? Are they made in the USA (I say this because I hear the new 870s are made in china not sure if it's true or not)? Is this a good buy for the price? Thanks
rcase1234 is offline  
Old September 26, 2012, 09:45 PM   #2
Virginian
Senior Member
 
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
The ones I looked at were nice, but a satin finish rather than the polished finish of the Sporting Models. They were not rough like the Expresses. 2-3/4" only. If I wanted a hunting 100, or one to shoot clay pigeons, I wouldn't hesitate. All the 1100s, and the 870s, are still made in the USA, not China.
Virginian is offline  
Old September 28, 2012, 07:53 AM   #3
BoomieMCT
Senior Member
 
Join Date: August 5, 2010
Posts: 212
Remington 870's are still made in America. The H&R Pardner (an 870 clone) is made by Qiqihar Hawk Industries Co. Ltd, a Chinese company. That might be what you heard about.
BoomieMCT is offline  
Old September 28, 2012, 08:19 AM   #4
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 2,618
There's also a Ithaca clone imported, no connection with the New Ithaca Gun Co..

The Winchester 1200's were built on a cost bassis, that is how to build a shotgun as inexpensive as possible.

The Ithaca clone from China makes a Winchester 1200 look like a British bespoke gun!!!
jaguarxk120 is offline  
Old September 28, 2012, 11:15 AM   #5
Slugo
Junior member
 
Join Date: September 15, 2001
Location: Central PA
Posts: 1,007
the current crop of 1100's are every bit as good as the previous models...
Slugo is offline  
Old September 28, 2012, 11:22 AM   #6
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,195
But let's be honest here....not that the 1100's were bad guns....but it isn't like the 1100's are current technology either...and they do require a lot of maintenance if you expect them to operated reliably ( and its not difficult to do ...it just has to be done --- and most guys I see at the range today aren't really into maintaining their semi-autos ) the way they should.

...especially when compared to the new crop of gas guns ...from Beretta or Browning-Winchester ---where they have much improved gas systems.
BigJimP is offline  
Old September 28, 2012, 05:39 PM   #7
Virginian
Senior Member
 
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
The 1100 technology is not new. But, in 49 years I have yet to find a gun I like better. I have run thru a boatload trying. (SxSs don't factor into this discussion.)
Virginian is offline  
Old September 28, 2012, 06:27 PM   #8
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,195
What we like ..is hard to quantify ...( and I don't want a gas gun ) ....but if I did there are a number of offerings from Beretta....

like this parallel comb - gold target for around $ 1,500

http://www.berettausa.com/products/a...gold-sporting/

or maybe this one ..but I don't like the angled comb on it...
http://www.berettausa.com/products/a...-tgt12/30/obs/

or I might give this a try ....
http://www.berettausa.com/products/a...rget-kick-off/

----------------
but right now - in semi-autos I'll settle for Benelli Super sport models I have one in 12ga and one in a 20ga....both really versatile...

http://www.benelliusa.com/shotguns/b...nd-sport-2.php

----------------
but it depends on what the OP likes ...not what I like ....
BigJimP is offline  
Old September 28, 2012, 06:42 PM   #9
Slugo
Junior member
 
Join Date: September 15, 2001
Location: Central PA
Posts: 1,007
I would choose an 1100 over any Beretta. Lord knows, I've owned a ton of both. The Beretta is a great autoloader, but the complicated design of the gas system is downright stupid. Especially the 391 series. The 1100 is a dream to maintain. I just finished cleaning my LT-20 this afternoon. A snap for sure! But they both pale when it comes to an inertia driven Benelli. It's all a matter of choice...
Slugo is offline  
Old September 28, 2012, 07:20 PM   #10
rcase1234
Senior Member
 
Join Date: September 6, 2012
Location: Michigan
Posts: 407
Thanks everyone for your help! Has anyone tried to use 3" shells on a nonmagnum 1100 receiver with the steel shot barrel Remington makes? I think I'm going to get an 1100 and get one of these barrels so I can use a 3" shell for duck and goose hunting. If you have used this barrel please give me some input on it. In curious to know how well it works
rcase1234 is offline  
Old September 29, 2012, 09:51 AM   #11
LSnSC
Senior Member
 
Join Date: January 5, 2010
Posts: 514
They work fine. I used one for years with no problems. The powder in Steel shells burns dirty and it will gun up the 1100's gas system quicker than regular loads. Add a little water and you get a real mess.

The Beretta 390 / 3901 has a simple gas system that is very easy to maintain. One solid stainless piston. I dont know why they changed it in the 391. A solution in search of a problem I guess.
LSnSC is offline  
Old September 29, 2012, 10:12 AM   #12
rcase1234
Senior Member
 
Join Date: September 6, 2012
Location: Michigan
Posts: 407
Thanks for your reply. I think this is what I'll do then. Did you use the 3" shells on the non magnum receiver? Or did u just use 2 3/4 steel loads?
rcase1234 is offline  
Old September 29, 2012, 12:48 PM   #13
LSnSC
Senior Member
 
Join Date: January 5, 2010
Posts: 514
Regular 2.75" reciever, 3" steel.
LSnSC is offline  
Old September 29, 2012, 02:49 PM   #14
rcase1234
Senior Member
 
Join Date: September 6, 2012
Location: Michigan
Posts: 407
Thank you for all your help! Now, I apologize for bugging you but what is the biggest size shot you can use through this barrel? Like #2? Or what? Again thanks and I promise this is my final question for you (sorry for bothering you about this I'm just very curious)
rcase1234 is offline  
Old September 29, 2012, 03:50 PM   #15
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,195
You can shoot "00" or slugs or whatever ...depending on what choke you put in..../ you never go tighter than Modified Choke with Steel shot ...there are choke restrictions...

I ran some " OO " buck thru my .410 O/U recently -- just for the heck of it.
BigJimP is offline  
Old September 29, 2012, 03:50 PM   #16
LSnSC
Senior Member
 
Join Date: January 5, 2010
Posts: 514
No size restriction Im aware of. I shoot #3's most of the time.
LSnSC is offline  
Old September 30, 2012, 02:06 PM   #17
Virginian
Senior Member
 
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
I have had a Remington Steel Shot barrel for over 20 years. I used it on a 2-3/4" 1963 gun receiver for about the first 17 years, then I retired the old girl to clays duty only and bought a "new" 1966 Magnum for waterfowl. My steel barrel was a very early one and I had to enlarge the gas port. Remington said for me to do it because they knew me and trusted me back then. Worked fine ever since - the newer one have the bigger port. Steel was rapidly evolving back then. You can basically shoot whatever you want. Remington makes a flush Steel rated RemChoke, and it works. I haven't shot steel since tungsten arrived, but the barrel works great with anything as long as it is powerful enough - in essence no wimp loads. The geese in Manitoba and more than a few ducks would agree if they could.
Steel isn't dirty. Blue Dot is dirty. I have no issues up to 50 or so rounds and it isn't dirty much by then. I clean any gun after I shoot and I don't shoot that much at a stretch.
Virginian is offline  
Old October 1, 2012, 01:25 PM   #18
Ridge_Runner_5
Senior Member
 
Join Date: February 8, 2008
Location: Denver, CO
Posts: 1,925
I've shot #7 1/2 and 8 birdshot through mine, as well as 00 Buck and even rifled slugs. Never had any issue with it.

Ridge_Runner_5 is offline  
Old October 2, 2012, 12:32 AM   #19
.300 Weatherby Mag
Senior Member
 
Join Date: September 6, 2008
Posts: 1,777
Quote:
the current crop of 1100's are every bit as good as the previous models...
That's if you're lucky to get one built on tooling that's not worn out by employees that give a crap on that particular day... I don't trust Remington to get it right the first time anymore.. Too much personal experience with Q/C problems with recent guns to want to give them any more of my money...
.300 Weatherby Mag is offline  
Old October 2, 2012, 09:56 AM   #20
Virginian
Senior Member
 
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,528
I have seen occasional issues with newer Remingtons, and everything else. We are in the Harvard Business School cycle of spend less on in house QA/QC, and if they say it, it is gospel. I have seen no issues with an 1100; mostly Expresses. Upon reflection, I haven't seen any issues with any Weatherbys. They seem to control the end product pretty well with their management, but they change who they are having build shotguns for them too often to suit me.
Virginian is offline  
Old October 2, 2012, 11:00 AM   #21
carpshooter
Member
 
Join Date: October 21, 2009
Location: Iowa
Posts: 25
Here's what I think !

1100 are great guns , I own a couple !
__________________
Shooting carp with whatever it takes !
carpshooter is offline  
Old October 2, 2012, 01:32 PM   #22
eastbank
Senior Member
 
Join Date: February 7, 2008
Location: pa.
Posts: 2,450
yeah,what he said. eastbank.
eastbank is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.08153 seconds with 10 queries