The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools Search this Thread
Old April 22, 2012, 08:42 PM   #1
troopcom
Senior Member
 
Join Date: June 24, 2011
Posts: 230
Yugo k98

Just picked up a couple of Yugo Capture K98 rifles. The bores look good with no rust or pits. Did the Yugos put new barrels on them or do they have original barrels?
troopcom is offline  
Old April 23, 2012, 06:35 AM   #2
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
Some Yugo M98/48 or MOD98/48 capture K98 Mausers did receive new barrels. The new barrels are .250 inch shorter than the original MOD98 barrels. 23.250 vs 23.500+/-
madcratebuilder is offline  
Old April 23, 2012, 11:09 AM   #3
troopcom
Senior Member
 
Join Date: June 24, 2011
Posts: 230
Are the new barrels they received accurate?
troopcom is offline  
Old April 24, 2012, 04:59 AM   #4
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
The Slav's built pretty good Mauser style rifles, starting with the M1924 with the help of FN and continuing through the late 50's with the last of the BO's.

A new barrel should shoot 8mm surplus at or under 3-4moa. Hand loads could shoot as well as 1-2moa. I have no problems getting sub 2moa shooting factory priv and the 50's surplus is 3-4moa with assorted Yugo Mausers.
madcratebuilder is offline  
Old April 24, 2012, 09:32 PM   #5
troopcom
Senior Member
 
Join Date: June 24, 2011
Posts: 230
I hope to have the same results with mine. Thanks for the reply madcratebuilder. I want to scout scope one of them without permanently altering the rifle. What mount and scope to do you suggest?

Last edited by troopcom; April 24, 2012 at 09:43 PM.
troopcom is offline  
Old April 25, 2012, 05:46 AM   #6
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
You can get a scope mount that replaces the rear sight, it require that you use a long eye relief scope. I've never messed with the scout scope set ups.

I have never really liked the Mauser sights. I ended up buying a Mojo double aperture setup. Apertures at both front and rear, both have different size inserts. Now I can shoot these with reasonable accuracy.

Rear Mojo on a M24/47


Mojo front aperture set up. You have to remove the sight cover for clearance.

madcratebuilder is offline  
Old April 25, 2012, 03:01 PM   #7
chiefr
Senior Member
 
Join Date: January 27, 2010
Location: AR
Posts: 1,401
Some of the Yugos 98s were completely arsenal reworked or that is what I have been told.
Also many the 24/47s and the 48 Mausers I have seen from SOG and SAMCO etc are in almost perfect condition with near mint bores. I have fired several of these rifles using the original Yugo ammo and was very impressed. IMHO these are bargains and I think once the word gets out, they will sell out soon.
chiefr is offline  
Old April 25, 2012, 07:36 PM   #8
troopcom
Senior Member
 
Join Date: June 24, 2011
Posts: 230
I'm glad to hear a couple of you guys are having success with your Yugo Mausers. I will update later with a range report and I'll try to load up some pics. I want to pick up another one, but I'm undecided as to which other one to add to my collection. I'm thinking either a Russian Capture or a Persian if I can save the extra $$$
troopcom is offline  
Old April 26, 2012, 05:44 AM   #9
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
Quote:
I'm thinking either a Russian Capture or a Persian if I can save the extra $$$
The Russian captures tend to be pretty rough, lot of peening and that thick nasty varnish coating on the stock. You well find a jewel occasionally. I just cleaned one up that ended up looking original with a nice laminated stock.

Keep an eye on Gunbroker and you may find a BO with a Syrian, Iraqi, or Egyptian crest.

This is a Syrian crest, probably a Israel capture from one of the late 60's wars, then imported to the US post 1968.


Last edited by madcratebuilder; April 26, 2012 at 05:53 AM.
madcratebuilder is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:44 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06340 seconds with 8 queries