|
November 9, 2012, 05:23 PM
|
#1 |
|
Junior Member
Join Date: March 7, 2012
Posts: 4
|
H&R 999
I have an H&R 999 that works good except for a couple of problems. The barrel latch on the top of the revolver works loose after firing a couple of rounds and has to be pushed back into place each time. The second problem is that the cylinder comes off the shaft when extracting empty rounds. I push it back on the shaft, turn it, and it locks back into position. I'm sure these problems are due to a couple of worn parts. Has anybody ever had these problems and which parts need to be replaced?
Last edited by cruiser00; November 10, 2012 at 05:18 PM. |
|
|
November 16, 2012, 03:55 PM
|
#2 |
|
Member
Join Date: July 28, 2011
Posts: 40
|
Broken, or missing latch spring/plunger. The latch should have stiff downward pressure on it.
Gunpowder residue can build up in the cylinder latch area causing it to detach, or you may have a broken latch. Hope this helps. My 999 is one of my favorite shooters. |
|
|
 |
| Thread Tools | Search this Thread |
|
|
