|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
October 19, 2009, 10:58 AM | #1 |
Senior Member
Join Date: April 20, 2009
Location: Cape Town - South Africa
Posts: 627
|
Anyone here reload 0.357 SIG?
Hi,
I have recently started reloading for my wife's 0.357 Sig (Glock 33) and I am going through some teething issues. ( I have been reloading for many calibers since 1991, not exactly new to reloading, just to this particular caliber) If you do and are wiling to help iron out a few issues, please let me know and I'll PM you with more details. Brgds, Danny |
October 19, 2009, 11:08 AM | #2 |
Senior Member
Join Date: August 16, 1999
Location: North Florida
Posts: 1,346
|
If you use a Lee Factory Crimp die as the last step, it will eliminate any "bullet setback" issues. Gives a nice firm crimp.
__________________
I think this country is screwed. |
October 19, 2009, 02:39 PM | #3 |
Senior Member
Join Date: January 13, 2008
Posts: 367
|
I load quite a bit of it, it is not too hard. Definitely use Lee Factory Crimp Die, it is a must. Bullets must be with large cylindrical section, not just regular 9mm bullets.
I am using Dillon carbide dies, but also used the regular ones with lube... no big difference in performance, just convenience. Other than this, not much there... |
October 19, 2009, 02:51 PM | #4 | |
Senior Member
Join Date: May 20, 2001
Location: Oshkosh wi.
Posts: 3,055
|
Quote:
Important to use .355 bullets in a TC,(truncated cone), configuration, so the straight sides can have the neck crimped into it. The Hornady 125 XTP is such a bullet, so is the 124 Hornady HAP,(Hornady Action Pistol), bullet.
__________________
The more people I meet, the more I love my dog They're going to get their butts kicked over there this election. How come people can't spell and use words correctly? |
|
October 19, 2009, 02:55 PM | #5 |
Senior Member
Join Date: December 4, 2008
Location: Dallas, Tx.
Posts: 266
|
I just started reloading 357 Sig about a month ago. But I don't have carbide dies so I lube the cases before I start. Haven't needed to trim the cases though. I have been using mostly 124 grain Berry FP bullets and they have been great so far. Also, like everyone else has stated I use the Lee FCD to ensure no set-back issues.
|
October 19, 2009, 04:20 PM | #6 |
Senior Member
Join Date: January 13, 2008
Posts: 367
|
The TC bullet is of course fine, another fine choice is the flat point, like what Montana Gold sells.
|
October 19, 2009, 08:53 PM | #7 |
Senior Member
Join Date: January 19, 2009
Location: Powder Springs, GA
Posts: 213
|
I run mine through a carbide 40cal sizer with decapping pin and then use a 357 resizer with no decapping pin, no need to lube anything..
|
|
|