The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old October 18, 2012, 11:26 AM   #1
Bigboy44
Junior Member
 
Join Date: October 18, 2012
Location: Colorado Rocky Mountains
Posts: 13
Heavy Bullets in Henry Big Boy

Hello there,
I have had my Henry Big Boy 44mag for three years. I have never put a bullet in it. I know, I know...CRAZY! my intention was to put it in the safe and keep it as a hand down family heirloom. I used to say its too dang purdy to shoot (it is very purdy). Well, I can't take it anymore. I gotta shoot this thing.

A buddy of mine has around 1500 rounds of 240 grain 44mag. He will sell some for $15.00 per box of 50. Killer deal right there!
My question:
Is 240 grain too much for this rifle? I think it's fine but I have read somewhere that it could cause damage.
__________________
Genesis 1:28
Bigboy44 is offline  
Old October 18, 2012, 11:29 AM   #2
Sparks1957
Senior Member
 
Join Date: September 4, 2011
Location: Vermont
Posts: 1,552
Bullet weight isn't what damages guns, powder charge and the attendant pressures are.
Sparks1957 is offline  
Old October 18, 2012, 11:31 AM   #3
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
Are these factory ammo or reloads?
__________________
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
Old October 18, 2012, 11:41 AM   #4
Bigboy44
Junior Member
 
Join Date: October 18, 2012
Location: Colorado Rocky Mountains
Posts: 13
Thank you for the quick replies!
They are factory loaded Winchester brand 44 rem mag 240 gr.
__________________
Genesis 1:28
Bigboy44 is offline  
Old October 18, 2012, 11:51 AM   #5
Brian Pfleuger
Moderator Emeritus
 
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
I don't see any warnings on their site about certain ammo (wouldn't be bullet weight but PSI) being prohibited. I assume the gun is made for "full-power" 44mag loads as I see no indication otherwise. As such, any ammo that will fit and function in the gun should be fine.

I would inquire in the owner's manual or by emailing Henry if the manual isn't available, just to be sure but I'd be surprised if there were any issues. Seems like a lawsuit waiting to happen, to make a gun chambered in a cartridge and make it so it can't handle standard ammo in that cartridge.
__________________
Nobody plans to screw up their lives...
...they just don't plan not to.
-Andy Stanley
Brian Pfleuger is offline  
Old October 18, 2012, 12:11 PM   #6
Bigboy44
Junior Member
 
Join Date: October 18, 2012
Location: Colorado Rocky Mountains
Posts: 13
Yeah, I'm gonna go buy a few boxes tonight and shoot it this weekend. I can also shoot 44 special through it.
Thanks for the help!
__________________
Genesis 1:28
Bigboy44 is offline  
Old October 18, 2012, 12:44 PM   #7
Rebel9793
Senior Member
 
Join Date: October 11, 2012
Location: Florida
Posts: 134
shot Winchester 240gr through my 94 lever and my fathers Ruger .44 carbine without a single issue. snatch em up and go have yourself a good time!
Rebel9793 is offline  
Old October 18, 2012, 01:30 PM   #8
Bigboy44
Junior Member
 
Join Date: October 18, 2012
Location: Colorado Rocky Mountains
Posts: 13
I cat wait to get outthere! I been dreaming about shooting it forever. I also have a S&W 44 mag 629. It will be a great day.
__________________
Genesis 1:28
Bigboy44 is offline  
Old October 18, 2012, 03:01 PM   #9
Rebel9793
Senior Member
 
Join Date: October 11, 2012
Location: Florida
Posts: 134
.44mag is awesome caliber.
Rebel9793 is offline  
Old October 18, 2012, 03:45 PM   #10
BLUETIP
Senior Member
 
Join Date: September 30, 2012
Location: tennessee
Posts: 119
very awesome indeed!!!!!!!!!!!
BLUETIP is offline  
Old October 18, 2012, 03:58 PM   #11
Rebel9793
Senior Member
 
Join Date: October 11, 2012
Location: Florida
Posts: 134
I have a ruger super redhawk with the 9.5" barrel and I roll soda cans at 100yds open sights
Rebel9793 is offline  
Old October 18, 2012, 04:25 PM   #12
Erno86
Senior Member
 
Join Date: September 22, 2012
Location: Marriottsville, Maryland
Posts: 1,738
I didn't know about a 240 grain warning concerning the Henry Big Boy --- can you fill me in?

One winter...about 7 years ago: I was standing about 10 feet away from a guy on the firing line at our private range, that was shooting a Henry Golden Boy in 45 Colt; offhand. He fired... and one of the rounds in the tubular magazine exploded --- buy a round behind it --- which pierced the primer, thus setting the round off.

I did not know whether he was shooting handloads or factory ammo. He suffered shrapnel puncture wounds to the left forearm and abdomen.

The RSO --- at the time --- was about 1/4 mile away, up at the trap field. I did not even get his range badge number; The wounded shooter and I, agreed to call the ambulance --- though I did offer to take him to the hospital --- because the range house phone needed a certain {unknown to us} code to work, and the 911 operator from my cell phone wanted the exact address; which we did not know. He just took off to the hospital in his white Toyota pick-up. That was the last time I saw or heard, about what happened to the wounded shooter.

The RSO came back on his ATV, around 15 minutes later...and he ask me if I knew the wounded shooter's range badge number? My reply was ---- no.

Last edited by Erno86; October 19, 2012 at 02:41 PM.
Erno86 is offline  
Old October 18, 2012, 05:06 PM   #13
testuser
Senior Member
 
Join Date: September 8, 2010
Posts: 495
I bought a .44 Henry Big Boy a few weeks ago and ran about 150 rounds through it. All were handloads and most were 19.0 grains of 2400 behind a 240 grain jacketed bullet. The weight of the rifle made some pretty mild recoil. Zero problems and the 2400 loads were incredibly accurate.

The only way I could see a magazine detonating under would be either pointed bullets, or seating a high primer. If the bullets have a flat point and the primers are seated properly, then it shouldn't be a problem.

240 grain bullets are the standard for the caliber and shot well in my Henry. Now, the 300 grain bullets, I don't know if they rifling will stabalize them...a quick check of the spec sheet will tell the twist and will let you know. I don't load 300 grain bullets in the .44, so I never cared enough to find out.
testuser is offline  
Old October 18, 2012, 06:18 PM   #14
KY Jim
Member
 
Join Date: August 14, 2008
Posts: 55
The twist rate for a Henry Big Boy 44 mag is 1:38 too slow for heavy bullets beyond 300 grs.
__________________
KY Jim
Gun Control means Hitting Your Target!!!!!
It's the Criminals Stupid!!!!!
KY Jim is offline  
Old October 19, 2012, 05:44 PM   #15
ltc444
Senior Member
 
Join Date: March 3, 2011
Location: Vernon AZ
Posts: 1,195
The value of an Heirloom rifle is not the pristine condition. It is the ability to look at the scratch on the stock were Brother Jay dropped it after he shot his first buck. Or the palm print were my son Jessie failed to clean it after he took a 10 pointer in the OUachita River bottoms.

Heirlooms are made up of memories which we pass down from grandpa to grandson.
ltc444 is offline  
Old October 23, 2012, 02:59 PM   #16
Bigboy44
Junior Member
 
Join Date: October 18, 2012
Location: Colorado Rocky Mountains
Posts: 13
^ Very well said! I agree 100%

So I got 100 rounds of ammo. Going to shoot one evening this week. I told my wife she could put the first round through it. She found that very romantic!! I haven't done anything to the gun since I bought it three years ago. I think I'll just dab a little gun oil in the action and let er rip! Any recommendations for it's first time out? Should I fill the magazine tube up to capacity on first shot?
__________________
Genesis 1:28
Bigboy44 is offline  
Old October 23, 2012, 06:38 PM   #17
ELMOUSMC
Senior Member
 
Join Date: June 26, 2007
Location: N.E.IOWA
Posts: 384
44 mags in a Rossi 92

I have a Rossi 92 in .44 mag and I have shot everything from factory loads to "hot hand loads" with no issues of any kind so I figure if a low end Rossi can handle them you should not have a problem with your Henry
ELMO
__________________
USMC 1965-1992 For God,Country,Corps
ELMOUSMC is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.16573 seconds with 10 queries