|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 8, 2013, 11:52 AM | #1 |
Senior Member
Join Date: February 15, 2012
Location: Texas
Posts: 160
|
Vietnam era stlye AR rifle specs.
Hello, I have a friend that I am trying to help. He wants to get his father for his B-Day) a AR, but the father wants it to look like the one he carried in Vietnam. I quess he has some sentimental feeling for that M-16 style. So my question is there any modern manufacture making a copy of that style AR? It seems the ones, with that style, on gunbroker.com are rare old rifles that are commanding huge prices. Any thoughts? Thanks.
WK |
February 8, 2013, 12:09 PM | #2 |
Senior Member
Join Date: October 26, 2012
Location: Los Angeles, CA
Posts: 779
|
http://rockriverarms.com/index.cfm?f...ategory_id=226
A2 buttstock, carry handle, 20" barrel, 2 piece handguard not the real thing but it looks practically identical.
__________________
I told the new me, "Meet me at the bus station and hold a sign that reads: 'Today is the first day of the rest of your life.'" But the old me met me with a sign that read: "Welcome back." Who you are is not a function of where you are. -Off Minor |
February 8, 2013, 12:11 PM | #3 |
Senior Member
Join Date: February 15, 2012
Location: Texas
Posts: 160
|
thanks
|
February 8, 2013, 12:11 PM | #4 |
Senior Member
Join Date: November 20, 2008
Posts: 11,132
|
...except for the shiny stainless barrel.
|
February 8, 2013, 12:13 PM | #5 |
Senior Member
Join Date: January 27, 2010
Location: Norfolk, VA
Posts: 2,905
|
That sounds like the lightly-used Bushmaster I got for $615 back before the madness started:
Fixed carry handle, A2 stock, nothing fancy. The model number is XM15-E2S, but I think that same number covers a lot of Bushmaster variants. |
February 8, 2013, 12:19 PM | #6 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Does he want it to look like an M-16 or an M-16A1? The M16 had no forward assist, m-16A1 had the forward assist.
The civilian version of the original M-16 was called the AR-15 SP1 by Colt when they were offered. They had triangular handguards, a shorter stock, fixed sight bridge with L-shaped rear sight adjustable for windage (flip up to switch from 300 yds to 500 yds sights), and a very thin pencil barrel with a 3-prong flash suppressor. There are outfits that offer the smooth-side receivers, but I don't know if anyone offers a complete rifle with all of the correct features. Others on here will know. The M16A1 used a teardrop shaped forward assist, had no case deflector lump, had triangular handguards and shorter stock, had a fixed sight bridge (carry handle) with an L-shaped rear sight adjustable for windage only (flip up to switch from 300 yds to 500 yds sights), and a cage flash suppressor with vents all the way around. All of these features are available as parts, again I don't know if anyone offers a complete rifle with these features. So, long story short, if he wants an AR15 that looks just like the M16 he carried in VietNam, he may have to build one.
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
February 8, 2013, 12:21 PM | #7 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
You're going to have to find the Colt SP1 to get the real thing. We didn't have those round handguards, they were tri-angle.
They are gonna be pricy. http://en.wikipedia.org/wiki/File:19...t_AR15_SP1.jpg
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
February 8, 2013, 12:26 PM | #8 |
Senior Member
Join Date: June 6, 1999
Location: El Paso, TX
Posts: 1,021
|
They supply a lot of retro parts, but are currently not taking any new orders.
http://www.nodakspud.com/ This is an excellent website to help show the different versions and variations of the early AR/M16s. http://www.retroblackrifle.com/
__________________
New gun, same ol' shot. |
February 8, 2013, 12:39 PM | #9 |
Senior Member
Join Date: November 24, 2007
Location: South Louisiana
Posts: 1,323
|
Pretty much everything AR is commanding huge prices right now, regardless of vintage. But if the father of your friend wants an Vietnam era look-a-like, I'm not aware of any manufacturers who are currently building M16A1 clones. You can piece one together yourself, but it's gonna take a little work hunting down the right components.
I think the best bet is to look through the various gun auction sights for a Colt SP1. The SP-1's were early civilain variants of the M16 and should be dead ringers for what the father saw in the service.
__________________
"Si vis pacem, para bellum" - If you want peace, prepare for war. |
February 8, 2013, 12:59 PM | #10 |
Senior Member
Join Date: February 15, 2012
Location: Texas
Posts: 160
|
Thank you for all the great input.
|
February 8, 2013, 05:38 PM | #11 |
Senior Member
Join Date: October 21, 2005
Posts: 129
|
look alike
A 1 stock and A 1 grip. Keep digging and you need a 1/12 barrel and a wait a minute flash supressor.
|
February 8, 2013, 06:34 PM | #12 |
Senior Member
Join Date: December 29, 2008
Location: East TN
Posts: 2,649
|
Like others have said, AR prices have been berserk for a few months now, Century Arms makes (assembles rather) just the rifle you're looking for using Colt parts. They're not known for being the highest quality manufacturer but usually they make good shooters and Century has good customer service and will fix most any problem a rifle comes with.
Edit- posted a bad link
__________________
Sgt. of Marines, 5th Award Expert Rifle, 237/250 Expert Pistol, 382/400. D Co, 4th CEB, Engineers UP!! If you start a thread, be active in it. Don't leave us hanging. OEF 2011 Sangin, Afg. Molon Labe |
February 8, 2013, 09:50 PM | #13 |
Senior Member
Join Date: November 6, 2011
Location: NE Georgia
Posts: 1,070
|
M16 and M16A1 also did not have the built in brass deflector and the rear sight was adjustable for windage only. didn't have the knob for elevation like the A2. 20 inch barrel, triangle shaped handguards. Fixed stock that was about an inch shorter than the A2 stock. Had a hinged metal cap on bottom of the pistol grip for storage. Also didn't have the finger ledge on the pistol grip, grip was smooth.
Last edited by CTS; February 8, 2013 at 09:55 PM. |
February 8, 2013, 10:16 PM | #14 |
Member
Join Date: October 12, 2009
Posts: 69
|
I'm late to the party but IMHO, look around and spend the extra on a Colt SP1 20" rifle.
It'll be the real deal Colt in the config you want. Early SP1s get the 3-prong, later SP1s get the birdcage. I think the last of the SP1s had the FWD Assist? I have one and had been looking at asking prices to get a sense of market value for my gun; the SP1s are not that crazy as everyone wants that Call of Duty M4rgery look. A close and cheaper alternative are the Century subcontracted "C15" - mostly Colt M16A1 parts but with a new lower and barrel. If I didn't have an SP1 already and badly wanted one, I'd consider it as a budget-tolerable alternative.
__________________
In a victim nation, a classroom full of dead children is morally superior to a teacher holding a smoking gun knowing she just protected her students. |
February 8, 2013, 10:25 PM | #15 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,846
|
Quote:
For the M16A1 look, you need the forward assist, either teardrop or round button is correct, and the birdcage flash suppressor. Both use the same triangle handguards. Sights are the two position flip type rear and round post front. I do not know if any of the tritium night sight front posts were in use in Vietnam, but they were in use shortly afterwards (76 on). The buttstock should be the solid rubber buttplate style, although some of the trapdoor ones might have been used in country by the end. Pistol grip with no finger grooves or bottom cap. Barrel is the lightweight style with the triangle handguard cap and the early style slip ring. Some of the "heavy barrels" were used but they were not full length heavy barrels, only the exposed part was thicker. The portion underneath the handguards was the same diameter as the "regular" barrel. Magazines should be the "strait" 20 rnd type, which was the general issue. The curved 30rnd common today was used by some troops (if the could get them) but were not general issue for infantry during Vietnam. The Colt SP1 sporter is the period correct semi auto. Early Colt semis used all the same parts as the M16/M16A1, except that the auto sear was not installed. Later SP1s used "semi auto" internal parts, which prevented simple conversion to full auto capability.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
February 8, 2013, 10:26 PM | #16 |
Senior Member
Join Date: November 6, 2011
Location: NE Georgia
Posts: 1,070
|
@nfafan: You might want to look again at the value of that SP1. the early models without forward assist are listed at $2100 in 100% and $1975 in 98%, $1850 in 95% and that has nothing to do with the latest hysteria.
@44AMP: you are probably right about the bottom cap on the pistol grip. I went in in '76 and the A1s we were issued had them but that was my earliest experience with them. Don't remember on the butt plate whether we had the trap door or the rubber. Seems like there may have been some of both. Last edited by CTS; February 8, 2013 at 10:32 PM. |
February 8, 2013, 11:39 PM | #17 |
Senior Member
Join Date: January 31, 2000
Location: Texas (By Way of Illinois)
Posts: 1,376
|
The C15A1 isn't a perfect copy, but it may be "close enough" if the father wants something that generally looks and feels like a Vietnam era rifle but isn't 100% accurate. And it's probably the most affordable option these days to get close to a Vietnam era styel rifle.
__________________
Midwestern Ramblings (my amateur firearms blog): http://martowski.wordpress.com/ |
February 9, 2013, 08:30 AM | #18 | |
Senior Member
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,923
|
Quote:
A1 upper, A1 furniture, three prong flash hider well get you very close to the look you want. You can even get current production lowers that have the same profile as the early lowers. Before the panic you could find a Bushmaster A1 real cheap, change the furniture and FH, done. |
|
February 9, 2013, 11:11 AM | #19 |
Senior Member
Join Date: November 18, 2001
Location: Over the hills and far, far away
Posts: 3,206
|
The Vietnam and 1970s/early 1980s era M16/M16E1/M16A1 styled rifles look like mine below and Madcratebuilder's above.
Nobody makes complete rifles like this any more. I had to build mine with New Old Stock parts. The furniture, 1/12 twist barrel, and upper are all surplus M16 or M16A1 parts. But still my lower doesn't look right (it's a DPMS A2 type lower with an M16 stock and grip). This is the M16A2 style (Panama/Gulf War I/Somalia era) that most ARs are patterned after today. Most obvious is the thicker barrel (at the muzzle anyway, a real M16A2 barrel is still thin under the hand guards), different carry handle, different sights, round handguards, longer stock, even the pistol grip is different. The rifling twist also changed from 1/12 to 1/7.
__________________
- Homeland Security begins at home: Support your Second Amendment - www.gunowners.org - www.saf.org - act.nraila.org - www.grnc.org Last edited by DMK; February 9, 2013 at 11:31 AM. |
February 9, 2013, 11:37 AM | #20 |
Senior Member
Join Date: November 24, 2010
Posts: 351
|
I found a milsurp A1 upper at a gunshow and then got a deal thru a distributor
for an A1 stock set and ordered a NODAKSPUD lower and a LPK from some other company and I had a M16A1 copy ready to shoot. My dad got it for his birthday this year. I payed $700 for the upper, $45 for the stock set, $150 for the lower, $60 in other parts. |
February 9, 2013, 11:48 AM | #21 |
Senior Member
Join Date: May 29, 2007
Location: St. Louis, MO area
Posts: 4,040
|
For more than you ever wanted to know, go to the Retro forum at AR15.com. There's a wealth of info there from folks who are into the old SP901 look.
It's difficult to build one up to match it exactly (less the select fire capability), but it is possible to get close. |
February 12, 2013, 11:21 AM | #22 |
Senior Member
Join Date: October 21, 2005
Posts: 129
|
VN
Forgot one thing. Gray instead of black.
|
February 12, 2013, 11:54 AM | #23 |
Junior Member
Join Date: January 21, 2013
Posts: 1
|
The M-16A1 I carried on Parris Island in 1980 was made by General Motors. Does anybody know how many and when G.M. made m-16s and how many other companys made them?
|
February 12, 2013, 12:24 PM | #24 |
Senior Member
Join Date: June 16, 2008
Location: Wyoming
Posts: 11,061
|
This post got me fired up. I dug my SP1 out of the safe and shot the heck out of it.
It still shoots and shoots well. I like the light weight. Not much heavier then a pistol. It don't like heavy bullets though, the 1:12 twist is only good for 55 grn and under. Don't know what they are selling for, but I'm gonna keep mine, I'll let my kids and grand kids fight over it when I go to join the Great Jumpmaster in the Sky.
__________________
Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071 |
February 12, 2013, 02:09 PM | #25 | |
Senior Member
Join Date: November 6, 2011
Location: NE Georgia
Posts: 1,070
|
Quote:
Last edited by CTS; February 12, 2013 at 06:18 PM. |
|
Tags |
m16 , vietnam |
|
|