March 18, 2010, 09:33 PM | #1 |
Junior Member
Join Date: March 16, 2010
Location: Los Angeles
Posts: 5
|
Stiff Holster
I just bought my first BP pistol from Cabella's along with a brand new holster. The holster is tanned very nicely but very stiff, too stiff to even force the pistol in.
Is there a way to soften this leather without ruining the patina of the leather? Perhaps from the inside? Anyone had this problem? thanks in advance, mike |
March 18, 2010, 11:51 PM | #2 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
You could grease up the gun, wrap it in a plastic and then soak the holster in water. Stuff the gun down it and allow it to dry. That will help stretch out the holster.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
March 19, 2010, 12:32 AM | #3 |
Senior Member
Join Date: March 5, 2008
Location: Sunny California
Posts: 1,281
|
You could work in like a new baseball glove maybe...
|
March 19, 2010, 01:26 AM | #4 |
Senior Member
Join Date: February 24, 2009
Posts: 727
|
I would do what 4V50 Gary said, then give it a couple light coats of neatsfoot oil when completely dry.
|
March 19, 2010, 06:19 AM | #5 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,189
|
You can do that if the leather is vegetable tanned but a lot of Cabela's leather is chrome tanned and it will get hard if soaked in water.
|
March 19, 2010, 08:15 AM | #6 |
Senior Member
Join Date: September 27, 2004
Posts: 4,811
|
I just got a holster from them too, the "open top" with that reddish-brown color to it?
If so here's what I did & it seems to have worked for me. I rubbed a little neatsfoot oil in. (The leather was well filled with oil of some kind already & I didn't want to overdo it). Then I used a hair dryer set on low flow & high heat to help the oil penetrate the leather evenly. To do this I put the holster back in the shipping box minus the packing & used the dryer to heat the box inside & contents for about 15 minutes to really soak the leather with heat all the way through. Once that was done I shoved the pistol into a 1-gallon Ziploc bag, muzzle first, & wiggled it into the hot, oily holster. The purpose of the bag is to protect the finish from the hot oil, leather tanning leftovers & so on. Then I let it sit for 3 days. Now its darn near a perfect fit, just firm enough grip to keep it in place but loose enough to allow for drawing without it slipping on the belt. I store the empty holster with a plastic (empty) pill container in the space where the cylinder would normally be, this keeps the shape in that area as well. |
March 19, 2010, 08:41 AM | #7 |
Senior Member
Join Date: October 14, 2009
Location: San Diego County
Posts: 795
|
I have a pair of their holsters, wrap the gun in saran wrap, wet the holster down with hot water I just used the kitchen sink, put the gun in and use your fingers & hands to form fit the holster, let dry at oom temp with gun still in it, very easy works just fine.
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006! |
March 19, 2010, 08:46 AM | #8 |
Senior Member
Join Date: February 25, 2009
Posts: 643
|
Unfortunately, that oil tanned holster will soften by itself and continue to do so until it, with heavy use, will begin to look like a rag. Vegetable tanned leather is the best way to go.
|
|
|