H&R 622 revolver

johnny boy · March 1, 2012, 06:55 AM

I have a H&R 622 .22 cal. revolver. The fireing pin is broken. The hammer and fireing pin is all in one. Can anyone tell me where I might find a replacement? Or how I might fix it. The only gunsmith near me doesn"t want to fool with it. I think the revolver is worth saveing.

CowTowner · March 1, 2012, 09:26 AM

Like this one?

http://www.gunpartscorp.com/catalog/...spx?catid=7900

johnny boy · March 1, 2012, 12:46 PM

Thanks. Will check them out.

CowTowner · March 1, 2012, 01:11 PM

Hope it is exactly what you need.

gyvel · March 1, 2012, 03:20 PM

The one in the illustration is a pinless hammer that uses a frame mounted firing pin with a transfer bar in between. I would contact them first before I sent off for it.

johnny boy · March 1, 2012, 06:57 PM

Thanks. Yes I think it would be a wise idea. From what I gather, the one I need may be sold out. But without pictures it is hard to tell.

gyvel · March 4, 2012, 02:03 AM

300670766594 Check out this eBay auction. I believe this is the hammer you need and all the rest of the internal parts for a rainy day. Hurry, though, it only has 16 hours to go as of Sat. nite, 12 midnight, MST.

gyvel · March 13, 2012, 05:50 AM

johnnyboy, Bob's Gun Shop in Arkansas has the hammer you need. Here's the link: http://www.gun-parts.com/harringtonrichardson/

March 1, 2012, 06:55 AM	#1
johnny boy Junior Member Join Date: March 1, 2012 Posts: 5	H&R 622 revolver I have a H&R 622 .22 cal. revolver. The fireing pin is broken. The hammer and fireing pin is all in one. Can anyone tell me where I might find a replacement? Or how I might fix it. The only gunsmith near me doesn"t want to fool with it. I think the revolver is worth saveing.

March 1, 2012, 09:26 AM	#2
CowTowner Senior Member Join Date: October 17, 2007 Location: Cowtown of course! Posts: 1,747	Like this one? http://www.gunpartscorp.com/catalog/...spx?catid=7900 __________________ NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor *“Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......”* President John F. Kennedy

March 1, 2012, 12:46 PM	#3
johnny boy Junior Member Join Date: March 1, 2012 Posts: 5	H&R .22 model 622 Thanks. Will check them out.

March 1, 2012, 01:11 PM	#4
CowTowner Senior Member Join Date: October 17, 2007 Location: Cowtown of course! Posts: 1,747	Hope it is exactly what you need. __________________ NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor *“Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......”* President John F. Kennedy

March 1, 2012, 03:20 PM	#5
gyvel Senior Member Join Date: August 30, 2009 Location: Northern AZ Posts: 7,172	The one in the illustration is a pinless hammer that uses a frame mounted firing pin with a transfer bar in between. I would contact them first before I sent off for it. Last edited by gyvel; March 1, 2012 at 08:05 PM.

March 1, 2012, 06:57 PM	#6
johnny boy Junior Member Join Date: March 1, 2012 Posts: 5	H&r .22 cal. model 622 Thanks. Yes I think it would be a wise idea. From what I gather, the one I need may be sold out. But without pictures it is hard to tell.

March 4, 2012, 02:03 AM	#7
gyvel Senior Member Join Date: August 30, 2009 Location: Northern AZ Posts: 7,172	300670766594 Check out this eBay auction. I believe this is the hammer you need and all the rest of the internal parts for a rainy day. Hurry, though, it only has 16 hours to go as of Sat. nite, 12 midnight, MST.

March 13, 2012, 05:50 AM	#8
gyvel Senior Member Join Date: August 30, 2009 Location: Northern AZ Posts: 7,172	johnnyboy, Bob's Gun Shop in Arkansas has the hammer you need. Here's the link: http://www.gun-parts.com/harringtonrichardson/