Mossberg 34 single-shot bolt-action .22 rifle

crooks420 · December 24, 2010, 05:12 PM

Howdy,

I am new here and I need a little help: I was recently given this old 1934 Mossberg Model 34 .22 cal. single-shot bolt-action rifle. Looks to be all original and fairly good condition. Seems to shoot fairly consistent as well, though I have not sighted it in yet.
After taking the bolt apart to clean out that old "gummy" grease, I found the firing pin has cracks.
So now I am in search of a new (used) firing pin and/or striker assembly and/or a complete bolt assembly. I have learned that the bolt is interchangeable with the Mossberg 30, which is also the Wards Western Field models 35A & 37.
It still fires rounds, but I want to be prepared for the inevitable. I'm not sure if I want to refinish the rifle... I kinda like the rustic and well used look of it.
Any help with a striker/ firing pin/ bolt would be greatly appreciated.

Jesse

john323 · December 27, 2010, 05:10 PM

Contact me at e-mail below.I have some Marlin bolts and I'm close to you.
John

publius · December 27, 2010, 11:13 PM

If John doesn't have what you need try Numrich gun parts on the internet. Neat old rifle, I would not refinish it, it looks great.

December 24, 2010, 05:12 PM	#1
crooks420 Junior Member Join Date: December 24, 2010 Location: San Gabriel, CA. Posts: 3	Mossberg 34 single-shot bolt-action .22 rifle Howdy, I am new here and I need a little help: I was recently given this old 1934 Mossberg Model 34 .22 cal. single-shot bolt-action rifle. Looks to be all original and fairly good condition. Seems to shoot fairly consistent as well, though I have not sighted it in yet. After taking the bolt apart to clean out that old "gummy" grease, I found the firing pin has cracks. So now I am in search of a new (used) firing pin and/or striker assembly and/or a complete bolt assembly. I have learned that the bolt is interchangeable with the Mossberg 30, which is also the Wards Western Field models 35A & 37. It still fires rounds, but I want to be prepared for the inevitable. I'm not sure if I want to refinish the rifle... I kinda like the rustic and well used look of it. Any help with a striker/ firing pin/ bolt would be greatly appreciated. Jesse

December 27, 2010, 05:10 PM	#2
john323 Member Join Date: June 16, 2009 Location: MONTEREY PARK , CA Posts: 80	Marlin Contact me at e-mail below.I have some Marlin bolts and I'm close to you. John __________________ [email protected] Southern California Anything legal, Rifles, Handguns, Shotguns, Black powder

December 27, 2010, 11:13 PM	#3
publius Senior Member Join Date: January 25, 2005 Location: Mississippi/Texas Posts: 2,505	If John doesn't have what you need try Numrich gun parts on the internet. Neat old rifle, I would not refinish it, it looks great. __________________ "Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain