|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 6, 2013, 10:43 PM | #1 |
Member
Join Date: February 4, 2013
Posts: 72
|
Load/cycle counter for presses
Ok, this isn't something I've seen, but I'm not ready to assume that it's because it doesn't exist. But, does anyone manufacture counting devices for presses, such that it keeps a running count of the number of times you cycle the handle, throughout the life of the machine? I come from the world of tractors, and I'm used to hour meters, so I'm wondering if a comparable concept exists in the world of reloading presses.
Yes, I realize there are countless ways to track things, but this is more a question of curiosity than it is of planned usage or implementation. |
February 6, 2013, 11:15 PM | #2 |
Senior Member
Join Date: December 5, 2009
Posts: 1,411
|
For home reloading I have never seen one. I don't know about manufacture's machines.
|
February 6, 2013, 11:46 PM | #3 |
Senior Member
Join Date: September 8, 2010
Location: New Mexico
Posts: 688
|
I made a pretty inexpensive primer counter for my Pro 2000 with the help of an electronics whiz. It has a micro-controller that was programed the way I wanted it.
http://www.thehighroad.org/showthrea...=round+counter The Press Monitor products are pretty pricy, but if you don't mind that, they just may be what you are looking for. Press Monitor Carl's Electronic Kits sells this up/down micro-controller controlled kit ($23.00) that could be powered by an old phone power supply, and the counting input could be a strategically placed micro-switch similarly to what I did with the primer counter above. (you do need a soldering iron) Up/Down Counter |
February 7, 2013, 12:07 AM | #4 |
Member
Join Date: February 4, 2013
Posts: 72
|
Interesting stuff there. Thanks!
|
February 7, 2013, 12:23 AM | #5 |
Senior Member
Join Date: March 16, 2010
Posts: 733
|
There are hundreds if not thousands of different mechanical counters avalable, you just need to figure out how to mount it so some part of the handle or ram hits it every time you pull the handle... mechanical would be my choice so you dont have to worry about batteries....
here is one example.... http://www.amazon.com/Tally-Number-M...anical+counter im sure a little searching could come up with a 6 digit version... |
February 7, 2013, 09:53 AM | #6 |
Senior Member
Join Date: November 22, 2006
Posts: 3,077
|
|
February 7, 2013, 10:44 AM | #7 |
Senior Member
Join Date: January 23, 2013
Location: Forgottonia, Il
Posts: 217
|
Dillon used to sell a counter for their machines but they discontinued them a few years back. They pop up on ebay from time to time for around $35.
I have seen various "redneck" engineered designs on the net. Most involving a mechanical clicker connected with your choice of springs, baling wire, shoelaces, or bathtub stopper chain. |
February 7, 2013, 01:24 PM | #8 |
Senior Member
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
|
Simplest and cheapest counter. Number of rounds loaded X the number of time you must pull/push/cycle the handle to make a complete round, up and down as 1 or up and down as 2, your choice.
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer, ICORE Range Officer, ,MAG 40 Graduate As you are, I once was, As I am, You will be. |
February 7, 2013, 01:25 PM | #9 |
Junior member
Join Date: July 13, 2012
Posts: 179
|
My counting device on my Dillon is quite simple. When the primer tube is empty, 100 rounds are finished and I refil the tube with another 100 primers to make another 100 rounds... It never fails me either!
DASHZNT |
February 7, 2013, 01:26 PM | #10 |
Member
Join Date: February 4, 2013
Posts: 72
|
Yes, may sound odd, but I'm more interested in tracking the usage of the machine than the number of rounds I make, if that makes sense. Sure, they're one and the same, but different in my mind somehow anyway.
|
February 7, 2013, 01:32 PM | #11 | |
Senior Member
Join Date: December 17, 2005
Location: Swamp dweller
Posts: 6,187
|
Quote:
__________________
NRA Life Member, NRA Chief Range Safety Officer, NRA Certified Pistol Instructor,, USPSA & Steel Challange NROI Range Officer, ICORE Range Officer, ,MAG 40 Graduate As you are, I once was, As I am, You will be. |
|
February 7, 2013, 01:36 PM | #12 | |
Member
Join Date: February 4, 2013
Posts: 72
|
Quote:
|
|
February 7, 2013, 07:25 PM | #13 |
Senior Member
Join Date: December 5, 2009
Posts: 1,411
|
For what you want it seems easy enough to do. Connect a 12 v. dc power supply to an hour meter with a light to make your work easier to see. Using an off and on switch you simply turn it on when you start loading and turn it off when you finish. This will give you an approximate number of hours of use. Most people figure usage buy the number of rounds produced.
|
February 8, 2013, 09:41 AM | #14 |
Senior Member
Join Date: November 22, 2006
Posts: 3,077
|
Hours used might be important on something like a backhoe because and odometer doesn't work when you have the machine parked but are still running the engine digging a hole.
On a reloading press you could have vastly different outcomes. I could sit down at a single stage press for two hours and have a few hundred rounds made or move down the bench and have a few thousand turned out in the same time on a progressive. |
February 8, 2013, 10:19 AM | #15 |
Junior member
Join Date: December 20, 2012
Location: The "Gunshine State"
Posts: 1,981
|
There are a few I know, but they are shotshell presses. Allows you to keep track and has a reset button to zero out if desired
|
|
|