|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
June 23, 2005, 02:05 PM | #1 |
Senior Member
Join Date: December 19, 2004
Posts: 859
|
Refinishing a handgun questions...
Here is a good thread:
http://www.thefiringline.com/forums/...light=Gun-Kote BUT: 1) Is an external mix brush good for this? The thread has the Badger 250. 2) Anyone have experience using a toaster oven? (My oven is off limits, and my 'buddy' who had a spare one got rid of it). I figure I can use three bullets under the frame at points that will not show to prop it up. 3) Anyone use other than 120 grit Al oxide? 4) What does one really want to mask? CZ coats guns pretty thick - the person on the thread did some of the internals, etc. What does one stay away from finishing? 5) Anyone have experience with long term durability of GK (home brew)? Thanks. |
June 23, 2005, 02:48 PM | #2 |
Senior Member
Join Date: December 5, 2004
Location: KTN
Posts: 1,221
|
I've heard of making an oven with a toaster oven (the element and thermostat) and a locker........sounds like it will work. Hope so anyway, my oven is probably off limits too.
__________________
HDR Ban!? It's a shame all of my guns sank with my boat last week... Time to catch up.....like mayonnaise |
June 29, 2005, 04:32 PM | #3 |
Senior Member
Join Date: June 28, 2005
Location: Dorton's Station
Posts: 105
|
...I just wait until the wife isn't home ............
|
|
|