October 12, 2012, 05:39 AM | #1 |
Member
Join Date: August 5, 2009
Location: Grand Rapids MI
Posts: 98
|
Rainier Lead Safe Bullets
Midway has just announced a sale on Rainier Lead Safe Pistol Bullets
http://www.midwayusa.com/find?promot...tNum=102562953 Does anyone have any experience with these (good ?....bad?...ugly?........) Thanks |
October 12, 2012, 06:42 AM | #2 |
Senior Member
Join Date: December 11, 2008
Location: Upper Michigan, above the Mackinac Bridge
Posts: 568
|
Love them!
I have had great results with them in all calibers. I load them for 380, 9mm, 10mm/40, 45 ACP, 38 spcl, 357 Mag. I only shoot outdoors and the reason I bought them originally was they were on sale at one point. I like how they perform, the ease with which they load, and you can buy hollow points for the same price. I am not using them for defensive handloads, but use them in large numbers to replicate my defensive handloads.
|
October 12, 2012, 08:03 AM | #3 |
Senior Member
Join Date: October 10, 2010
Posts: 166
|
Reloaded and shot about 800 rounds of 327 Fed Mag using Rainier 100 Gr plated HP. Going to get another thousand of them shortly. In other words, I haven't had any problems using them for self defense practice rounds. (As I don't hunt with them I have no idea how they would work on game.)
__________________
live and let live |
October 12, 2012, 08:41 AM | #4 |
Senior Member
Join Date: May 31, 2004
Location: Minnesota
Posts: 2,432
|
I've used Rainiers in 9mm, .38 Super, .40, 10mm, .45acp. .45 Colt with mostly great results.
The .451" 200 grain SWC is particularly accurate in a USP .45 and my .45 Colt carbine. Only my stock Glock 10mm barrel had trouble achieving top accuracy, but the KKM .40 conversion barrel in the same gun did not. (same results with Berry's) Glock 29 w/KKM .40 conversion, Rainier 165 FP, offhand at 25 yards. (pretty sure the flier is my fault) |
October 12, 2012, 08:51 AM | #5 |
Junior Member
Join Date: October 4, 2012
Location: Lancaster, Ca
Posts: 7
|
Loaded thousands of 45ACP and 38spl with these, had no real issues with them at all; fairly accurate - very light leading of the barrels if any. I worked them up just like any other load and they performed well. I believe there is a 1200 FPS limit by the manufacturer on these plated bullets, but I never get close to that with my loads.
|
October 12, 2012, 09:01 AM | #6 |
Junior member
Join Date: September 27, 2011
Posts: 382
|
their .50 caliber bullets are also great !! i have loaded and shot several thousand of them, i currently have 1,000 each of flat point and H.P.
|
October 12, 2012, 10:36 AM | #7 |
Senior Member
Join Date: November 3, 2010
Posts: 2,016
|
Used many 1000's... No problems...
__________________
What did Mrs. Bullet say to Mr. Bullet? ... "We're having a BeeBee!"... IF THE SHOE FITS, WEAR IT!... IF THE GUN FITS, SHOOT IT! "Experience is something you don't get until just after you need it." |
October 12, 2012, 01:55 PM | #8 |
Senior Member
Join Date: April 4, 2011
Location: LA (Greater Los Angeles Area)
Posts: 2,589
|
Had a squib, my fault, stuck in my Glock barrel. Pounded it out and the plating still look good as new except rifling marks that did not penetrate the plating. I buy Berry's too.
__________________
............ |
October 12, 2012, 02:54 PM | #9 |
Senior Member
Join Date: January 15, 2011
Location: Deep South
Posts: 261
|
Have used a few thousand of 9mm and 10mm. When I pushed the velocity with the 10mm/180gr FP several would not even hit a silhouette at 25m and the ones that did were keyholing. For some reason the HPs did much better.
|
October 12, 2012, 03:05 PM | #10 |
Senior Member
Join Date: March 7, 2008
Location: central Illinois
Posts: 451
|
They are my bullet of choice in anything 40 ( I own 5). I use the 155 grain bullet and have fired thousands of them in Glocks, Sigs, Kahrs, Colts, and S&Ws all with excellent results.
__________________
Mark Lane to William Buckley: "Have you ever referred to Jessee Jackson as an ignoramus?" Buckley: "If I didn't, I should have" |
October 12, 2012, 04:37 PM | #11 |
Senior Member
Join Date: January 15, 2008
Location: PRK
Posts: 735
|
They shoot very nicely in my P226. Very accurate, and cheap. I probably have 200 - 300 of the original 3000 pieces I bought. Never regretted buying them. BTW - Thanks for the heads up, I am going to Midway's site and maybe get another 3000.
__________________
I ain't got no safe queens. I shoots em all... |
October 12, 2012, 05:31 PM | #12 |
Senior Member
Join Date: November 6, 2011
Location: DFW, Texas
Posts: 876
|
No complaints here but I prefere Berry's as the plating is a tad thicker.
|
October 12, 2012, 08:25 PM | #13 |
Senior Member
Join Date: October 24, 2009
Posts: 280
|
After over 800 rounds reloaded in .40 S&W, .38 special and .357 magnum, I have had zero issues. Functioned well and great accuracy for plinking.
Remember their website states to keep them under 1200fps. These are plated not jacketed rounds.
__________________
When seconds count, why is help minutes away? |
October 13, 2012, 04:44 AM | #14 |
Member
Join Date: August 5, 2009
Location: Grand Rapids MI
Posts: 98
|
Thanks to everyone for your imput.
In th epast I have taken 9mm plated bullets to 1200 fps with no problems. Anything larger than 9mm is less than 1200 fps. |
October 13, 2012, 07:59 AM | #15 |
Senior Member
Join Date: December 23, 2005
Location: Minnesota
Posts: 2,951
|
Plated bullets used to fill a price gap between Lead and Jacketed. Not so any more. Berry and Rainier have become very proud of their bullets and now charge as much if not more than true jacketed, even on sale.
I for one will not pay more for an inferior bullet. |
October 13, 2012, 11:46 AM | #16 |
Senior Member
Join Date: September 8, 2010
Posts: 495
|
Jacketed and plated rival each other in price, maybe in 9mm and in some .40 caliber weights. But, that's a lot harder to do with other calibers, especially .357 and .44.
I have a preference for plated bullets in some applications, since I shoot steel almost exclusively. Jackted bullets will sometimes send a jacket fragment back at you, but plated bullets are soft enough to be destroyed easily by the steel. Less airborne lead and less fouling of ported pistols is also a plus. Accuracy is good enough to hit a 5 inch steel plated at 20 yards, which is all I'm asking these bullets to do. |
October 13, 2012, 03:06 PM | #17 | |
Senior Member
Join Date: January 15, 2011
Location: Deep South
Posts: 261
|
Quote:
http://www.midwayusa.com/product/105...ated-flat-nose Add: I would have to look back at my log book but I think I was pushing them well over 1300fps. Thinking back to my troubleshooting at the time I was suspicious that the Lee FCD was deforming the projo, which may have contributed. Unforturnately I had loaded the box of 500 and had none left to test my theory. I agree that the price for Rainiers has gone through the roof, used to be way cheaper than FMJs. Was thinking of trying Precision Delta next time. Last edited by greentick; October 13, 2012 at 03:17 PM. Reason: Added more info |
|
October 14, 2012, 10:07 AM | #18 |
Senior Member
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,324
|
making noise vs making close holes
I used them commercially (and in vast quantity) in numerous chamberings for cop-training ammo.
I much prefer other choices for my own ammo, choices that provide better accuracy.
__________________
. "all my ammo is mostly retired factory ammo" |
Thread Tools | Search this Thread |
|
|