Springfield 1861-64 bbl

**4V50 Gary** · October 4, 2012, 01:14 AM

Where can I get a Springfield M1861, M1863 or M1864 bbl?

arcticap · October 4, 2012, 02:59 AM

Try Lodgewood.

www.lodgewood.com

Willie Sutton · October 4, 2012, 06:32 AM

And S&S in New York.

Willie

.

bedbugbilly · October 4, 2012, 04:09 PM

I believe it is Whitacre (sp?) that makes various model rifled musket barrels for competition. Go to the NSSA site and there should be a link to them.

bedbugbilly · October 4, 2012, 04:18 PM

I did a quick check and here is the link to Whitacre Barrels

http://www.whitacresmachineshop.com

Lodgewood and S & S, as already mentioned, are also good ones to check with. I've dealt with all three of them - top notch folks.

Are you looking for a new drop in to shoot or a barrel for "looks"?

**4V50 Gary** · October 6, 2012, 12:28 AM

A classmate is looking for a barrel to make a rifle with. His goal is to make a flintlock with a 500 yard range of a minie gun.

I told him with an Enfield barrel, he could reach out even more.

Hawg Haggen · October 6, 2012, 06:45 AM

That should be interesting.

**4V50 Gary** · October 6, 2012, 11:29 AM

Hawg - he wants to make a Brown Bess lookalike but a rifled barrel. Sneaky if he's going for top shot in a smoothbore match.

Hawg Haggen · October 6, 2012, 11:58 AM

October 4, 2012, 01:14 AM	#1
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 15,540	Springfield 1861-64 bbl Where can I get a Springfield M1861, M1863 or M1864 bbl? __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

October 4, 2012, 04:09 PM	#4
bedbugbilly Senior Member Join Date: November 19, 2009 Posts: 1,366	I believe it is Whitacre (sp?) that makes various model rifled musket barrels for competition. Go to the NSSA site and there should be a link to them. __________________ If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63

October 4, 2012, 04:18 PM	#5
bedbugbilly Senior Member Join Date: November 19, 2009 Posts: 1,366	I did a quick check and here is the link to Whitacre Barrels http://www.whitacresmachineshop.com Lodgewood and S & S, as already mentioned, are also good ones to check with. I've dealt with all three of them - top notch folks. Are you looking for a new drop in to shoot or a barrel for "looks"? __________________ If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63

October 6, 2012, 12:28 AM	#6
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 15,540	thanks everyone A classmate is looking for a barrel to make a rifle with. His goal is to make a flintlock with a 500 yard range of a minie gun. I told him with an Enfield barrel, he could reach out even more. __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

October 6, 2012, 06:45 AM	#7
Hawg Haggen Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 10,377	That should be interesting. __________________ http://blackpowdertimes.com/index.php

October 4, 2012, 02:59 AM	#2
arcticap Senior Member Join Date: March 16, 2005 Location: Central Connecticut Posts: 2,961	Try Lodgewood. www.lodgewood.com

October 4, 2012, 06:32 AM	#3
Willie Sutton Junior member Join Date: January 26, 2012 Posts: 1,066	And S&S in New York. Willie .

October 6, 2012, 11:29 AM	#8
4V50 Gary Staff Join Date: November 2, 1998 Location: Colorado Posts: 15,540	Hawg - he wants to make a Brown Bess lookalike but a rifled barrel. Sneaky if he's going for top shot in a smoothbore match. __________________ Vigilantibus et non dormientibus jura subveniunt. *Molon Labe!*

October 6, 2012, 11:58 AM	#9
Hawg Haggen Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 10,377	__________________ http://blackpowdertimes.com/index.php