May 13, 2012, 07:35 PM | #1 |
Senior Member
Join Date: July 18, 2011
Location: Indiana
Posts: 150
|
Going to Buy a New Press
I am looking to upgrade from my single stage Lyman and my Lee turret. I do not load very much but I have decided I want the top of the line progressive press. I typically load .308, .25-06, .44 Magnum, and .45 ACP. I have narrowed it down to the big three: Dillon, Hornady, and RCBS. Which do I buy? Anything you guys could provide would be substantial. Thanks.
|
May 13, 2012, 08:07 PM | #2 |
Senior Member
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
|
I would recommend Dillon or Hornady. Which model of Dillon would depend on the quantities you need.
Please tell us more about your loading style, how much you load at one sitting, how many rounds you load before changing calibers, what is your budget, how much space you have for your operation, will you leave everything set up permanently or take down between sessions? I also wonder how you eliminated the Lee Loadmaster and Lee Pro-1000 presses. Thanks for asking our advice, Lost Sheep |
May 13, 2012, 08:50 PM | #3 |
Senior Member
Join Date: February 5, 2011
Posts: 282
|
Well I'm assuming he eliminated the loadmaster when he decided he wanted the best. I've spent about a year tryin to get that thing puttin out results as consistently as my mec 650 shotshell press and I've just about given up on it. I cannot speak for the other lee but the fact that its supposedly a step down from the loadmaster.
Living another day To CRUSH another clay |
May 13, 2012, 09:35 PM | #4 |
Senior Member
Join Date: June 27, 2009
Location: SC
Posts: 200
|
Why not RCBS? I've been looking at all three too. Leaning toward the RCBS.
|
May 13, 2012, 09:38 PM | #5 |
Senior Member
Join Date: March 16, 2010
Posts: 733
|
If you dont load much, then I dont understand why you want to go to a progressive? You arent going to get better ammo, and in fact have a chance of getting worse ammo if you dont pay attention....
Just my opinion, but a progressive to me seems like kind of a waste for someone that loads less than a few thousand rounds a month..... My press sits idle and me with nothing to do most of the time.... If i had the money I could spend all that time loading, but even then, I could easily put out a few thousand rounds a month without even really trying hard.... Of course, I guess "I dont load much" can be subjective. To me that means less than 500 rounds a month, but could mean something completly different to someone else... |
May 13, 2012, 10:28 PM | #6 |
Senior Member
Join Date: June 27, 2008
Location: Tampa Bay, FL.
Posts: 346
|
I own the Hornady LNL, if I had to do it over again I'd get a Dillon.
Never loaded on a RCBS progressive so I can't comment other than to say the priming strips are interesting and the powder drop is top notch.
__________________
CZ 75 P-01 . CZ-75B . CZ 912 . CZ 920 . Glock 26 Gen 3 . Kimber Pro Crimson Carry . XDm 45 3.8 Compact . Ruger 22/45 MKIII |
May 13, 2012, 11:06 PM | #7 |
Senior Member
Join Date: March 28, 2007
Location: SOCAL
Posts: 359
|
I own a Dillon and Hornady LNL. I prefer the LNL by a wide margin.
BOTH are great machines though!
__________________
I am the Christian Conservative that CNN warned you about!! “Socialism is the philosophy of failure, the creed of ignorance and the gospel of envy.” Winston Churchill |
May 13, 2012, 11:11 PM | #8 |
Senior Member
Join Date: February 5, 2011
Posts: 282
|
|
May 14, 2012, 12:41 AM | #9 |
Senior Member
Join Date: September 8, 2010
Location: New Mexico
Posts: 688
|
All three are great presses with different strengths that fit different people best. RCBS's Pro 2000 excels if you want to load lots of pistol and rifle calibers. Fastest and safest primer system, fastest, and easiest caliber changes. Only cast iron frame this side of Dillon's commercial 1050. Fewest moving parts and once setup, Zero resyncing.
|
May 14, 2012, 12:45 AM | #10 | |
Senior Member
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,341
|
Quote:
For the price and capacity, the Lee tools might be just the thing. I asked for the OP's reasoning (and did not denigrate his choices). You admitted that you cannot speak for the Pro-1000. Can you speak for sigshepardo? If you REALLY want to trash the Lee Loadmaster, I'll pay shipping. Lost Sheep Last edited by Lost Sheep; May 14, 2012 at 09:13 PM. Reason: correct spelling of "mike" to "might" (be just the thing.) |
|
May 14, 2012, 08:52 AM | #11 | |
Senior Member
Join Date: February 5, 2011
Posts: 282
|
Quote:
Living another day To CRUSH another clay |
|
May 14, 2012, 12:02 PM | #12 |
Junior member
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
|
The Dillon progressive presses are clearly the top of the line in this lineup of three. In my opinion, comparing Lee to Dillon is like comparing Harbor Freight to Snap On. There's no comparison of quality possible.
RCBS progressives do not match Dillon quality either. I like RCBS products, but I understand that progressive presses are not RCBS's specialty. Dillon's specialty is progressive presses, so your choice seems clear. |
May 14, 2012, 04:25 PM | #13 |
Senior Member
Join Date: December 24, 2010
Location: Canada
Posts: 382
|
Changing between 4 different calibers all with different primer types isn't really something you want to do with a Dillon often. Changing out calibers from say 9mm to .45 ACP on a Dillon XL 650 with a case feeder is not a trivial task, and you better be prepared to load many thousands of rounds once you change calibers to make the change over worth it.
Another option is to buy a progressive, but keep your Lee Turret to load the calibers you shoot less often and change over the most. The other option is to buy 4 Dillon presses. And yes, I know folks that have a bench full of Dillon presses devoted to each caliber they shoot. |
May 15, 2012, 08:45 AM | #14 |
Senior Member
Join Date: January 16, 2011
Location: North Bend, OR
Posts: 743
|
It amazes me how much people complain about spending 10 - 15 minutes doing a caliber change. Not that big a deal.
|
May 15, 2012, 08:55 AM | #15 |
Junior Member
Join Date: May 13, 2012
Location: HENDERSON, NV.
Posts: 3
|
Reloading
I've had a Dillon for over 20yrs. Loaded 1000's of 45.s and 38. 148gr. wadcutters, and never had a problem. Parts that ware out are replaced by Dillon and shipped free of charge.
|
May 15, 2012, 09:54 AM | #16 |
Senior Member
Join Date: November 21, 2011
Location: Southern Louisiana
Posts: 1,399
|
My Dillon XL650 is also over 20 years old and has easily loaded over half a million rounds (I load at least 2000 per month). Just loaded 900 9mm and 300 45ACP for my son and I last night for the GSSF match in Monroe, LA this coming weekend. The only thing that has worn out or been replaced is the low primer buzzer switch. The switch quit working about a year ago, Dillon sent me a new one.
I have friends with Lee, Hornady, and RCBS progressives and we've all loaded on them all. None of the other presses come close to the Dillon. Of course, the Dillon is also the most expensive. |
May 15, 2012, 12:30 PM | #17 |
Senior Member
Join Date: September 21, 2008
Posts: 485
|
The advise given by someone with no experience...
Gerry, it is obvious from what you wrote you know NOTHING about Dillon presses.
"Changing between 4 different calibers all with different primer types isn't really something you want to do with a Dillon often." Have you ever loaded anything? Do you not know the .25-06 and ..308W used the same primer type? (LR) Do you not know the .44 Magnum and .45 ACP also use the same primer type? (LP) The 4 cartridges the OP mentioned need just one primer feed (Large), and NOT the 4 different sizes you state. There is NO changing required. "Changing out calibers from say 9mm to .45 ACP on a Dillon XL 650 with a case feeder is not a trivial task..." Have you done this or just "heard" about it? Again based on what the OP wrote, 3 of the 4 cartridges he mentioned use the SAME shell plate and require NO TIME to change. Only the .44 Magnum uses a different shell plate. If you had ever done it you would know that the casefeeder changes are equally non eventful. "The other option is to buy 4 Dillon presses." Although it would be nice to have, this is... to be nice just silly!!! "And yes, I know folks that have a bench full of Dillon presses devoted to each caliber they shoot." Well there it is, you really do NOT know anything about Dillon products. You give advise based on what you have heard!!! T. |
May 16, 2012, 12:45 PM | #18 |
Senior Member
Join Date: February 23, 2005
Posts: 13,195
|
I like the Dillon 650 .../ have had one for several yrs ...and for what its worth, I'd buy it again.
Changing calibers really isn't a big deal ....but I do take a few minutes to clean and lube the press when I change calibers...but even if I go from a caliber in small pistol primers ...to large pistol primers.../ its only a 20 min operation...( if you have toolheads set up with dies, ready to go )... I don't think the LNL is a bad press ...but I do think the Dillon 650 ( especially with the powder check die - is hands down a better press ). RCBS - although I've got a buddy or two that have them ...not really a contender in my view. |
May 16, 2012, 07:31 PM | #19 |
Junior member
Join Date: April 17, 2005
Location: Hartford, Vermont
Posts: 519
|
My best recommendation
is the great Dillon Model 550B.
|
May 16, 2012, 07:47 PM | #20 |
Junior Member
Join Date: May 14, 2012
Location: fayetteville n.c.
Posts: 14
|
press
i got a dillon xl650 the way to go
|
May 16, 2012, 08:35 PM | #21 | |
Senior Member
Join Date: December 24, 2008
Location: Loveland, CO
Posts: 1,476
|
Quote:
I have a pair of Dillon RL550B's, but prefer to do most of my rifle loading on a single stage press. Things like use of Lee collet die for neck sizing, bullet seating on a Forster Co-Ax for reduced bullet runout, etc. are just part of the reasons. |
|
May 16, 2012, 09:20 PM | #22 |
Senior Member
Join Date: November 21, 2010
Posts: 286
|
Dillon XL 650 was my first press as a new reloader, not hard to operate at all. Caliber changes not hard . Don't take our word for it, hundreds of videos on YouTube about dillon press changes watch and decide!
Sent from my iPad using Tapatalk HD |
May 17, 2012, 03:23 PM | #23 | |
Senior Member
Join Date: September 8, 2010
Location: New Mexico
Posts: 688
|
Quote:
The important thing for you to keep clear is that there is a red choice and a green choice that is every bit as good or better, depending on your needs and style of reloading, than the blue choice. You ought to be researching which feature set fits your reloading needs best. It may or may not be Dillon. I spent hours with the 650 before I decided on Green. I haven't been sorry even for a minute. |
|
May 17, 2012, 06:35 PM | #24 |
Junior Member
Join Date: May 1, 2012
Posts: 12
|
How much you reload may be a factor in why he wants a progressive. Sometimes peoples desire and enjoyment follow their tools, i.e., if it's easier to load 1K-2K rounds a month on a progressive, then he might do it. IMHO.
|
Thread Tools | Search this Thread |
|
|