What Components did you Find Today? Give up your source if you are stocked up.

j357 · March 30, 2013, 11:00 PM

I went out today to get a few components in the Northern Cincinnati area. I expected to be come back empty handed but had to get out for a drive.

I managed to purchase 1 of several bricks of primers behind the counter at Target World. I got 1k CCI LR Primers @ $32+Tx which was amazing given the $47 price they had on several boxes of Vance lead pistol bullets I recently paid in the neighborhood of $$35 for. I passed on those and the average of $24 lb for powder they had in limited supply. (I hate going into this place, I get a sharp acidic taste in my mouth, but at least they had some supplies.)

I then went up to South Lebanon to the Country Attic and found the powders I have been wanting. HP38 and Universal at $20 a pound. They had little to no bullets for pistol or rifle, but a good supply of BR-4 and LPM primers.

Had a good trip overall and plan to start my first work on a new project in 30-30 WCF loading tomorrow.

Hope this helps.

t45 · March 31, 2013, 10:41 AM

1000pcs of Winchester 223 brass. I never left the porch. UPS is my friend.

arizona98tj · March 31, 2013, 12:06 PM

I picked up some large pistol primers at the local Cabela's (Glendale, AZ) a week ago Saturday. They had about 60 bricks on the shelf....a day later, when I went back to pick up a order that I had shipped to the store, I checked the shelf and there were still a half dozen bricks. I was amazed they had lasted 24 hours over the weekend. They have sporadically had powder on the shelf, typically brands I don't use or am not even familiar with.

Beanie-Bean · March 31, 2013, 01:33 PM

Just ordered 2000 .400 CMJ bullets from Montana Gold

lamarw · March 31, 2013, 01:43 PM

Received a thousand pieces of .380 brass from my postman yesterday ("Today" per title of yesterday's post). I was criticized by another forum member a month ago for posting about getting ammo stuff on a different day than his "Today" titled post.

It was more than funny since that post stayed active for a month.

Sorry, I am not stocked up and don't want to reveal my source.

Burly · March 31, 2013, 02:02 PM

We've been doing ok on powder at the local Basspro. Its not a solid supply but a good varity has been trickling in if you're able to get in there when the doors open. Here's a hint, if there's more than 10 people standing at the door waiting for it to open, somebody knows something showed up lol. In the past two months I've seen magnum pistol primers on the shelf twice and in very limited quantity. Nothing else as far as primers go. Still making my rounds to the local shops when I can to try and scrounge some supplies up.

MEATSAW · March 31, 2013, 02:15 PM

just got 1500 hornady .224 55gr softpoints for my AR. That should keep me busy while this thing blows over

chiefr · March 31, 2013, 06:58 PM

All I could find was:

Out of stock, no backorder
Out of stock, backorder OK
Call for availabilty
Item backordered
Sold out
Shipment due in Jun-July 2013

black mamba · March 31, 2013, 08:25 PM

wrong post

drklude · March 31, 2013, 08:29 PM

Just yesterday I got the 1000 124 gr. of 9mm FMJ bullets from precision delta that I ordered about two months ago.

Kevin Rohrer · April 1, 2013, 05:00 PM

J357: If you were in my area, I could recommend several locations that are well-stocked.

hooligan1 · April 1, 2013, 05:03 PM

I got bullets and brass from MidSouth Shooters Supply, ordered it friday before last and got it last friday.

rlc323 · April 7, 2013, 04:24 PM

Winchester Small Pistol Primers in stock, at least for now. Sun 4 pm.

http://www.recobstargetshop.com/browse.cfm/4,533.html

Swampman1 · April 7, 2013, 04:29 PM

Quote:

Winchester Small Pistol Primers in stock, at least for now. Sun 4 pm.

Nice. What was the total cost with shipping/hazmat?

Vettebeach · April 7, 2013, 06:38 PM

Thanks, RLC323!

m&p45acp10+1 · April 7, 2013, 06:40 PM

I found 55 pieces of .357 Mag brass. My source was a guy at the range that gave me his brass after he shot it

. I let him shoot a couple of my guns as well.

Crashbox · April 7, 2013, 07:52 PM

This past Thursday I received (1000) .357 Magnum cases from Starline. About ten days prior they shipped the (500) .38 Special +P's I ordered for making Speer shotshell snake shredders.

Beginner 1960 · April 7, 2013, 08:55 PM

Got 2lbs of bluedot at bass pro last weekend,was looking for 2400 but these days make do with what u can find

rlc323 · April 7, 2013, 09:43 PM

Swampman: I didn't buy any as I have a decent supply. HazMat from Recobs is usually $27.50 by UPS but since I live within the delivery area of Spee-Dee delivery out of Wisconsin I usually end up paying $14 to ship powder or primers.

coldbeer · April 8, 2013, 03:53 PM

I went to shooters service looking for some H110 but any other magnum handgun powder like 2400, imr4227 or w296 would of been fine. I was expecting to leave dissapointed, but I left with what might be the last # of H110 for sale in the entire state. I feel like I won the lottery.

I also bought two packs of CCI small rifle primers from van born gunshop last week. They've somehow managed to have primers in stock throughout the current panick event which is amazing.

Both places are in southeast mi and they still have supplies but it's best to call first.

B.Bonham · April 8, 2013, 09:15 PM

I found some small rifle primers in stock at Midway today - bought 2000 or 2 box's of them. They are Winchesters

. That should keep my Contender .357 Mag. loaded up for Sunday afternoons for at least a year of plinking. I prefer CCI or Federal but, you can't be too picky these days... Dang hoarders! Now I am having fun bringing out the pair of 1858 Remington New Army's these days - everyone is impressed with them.

My current favorite plinking Recipe is a 38 spl. cartridge with 4.3 grains of Unique powder and a 125 grain SWC lead bullet. Very nice "flat shooting" and cheap to practice with. Not as cheap as a Federal 550 or a 525 .22 cal box - but still, very affordable.

I only have one rule... "Most of all - Have fun!"

Weasel

NWPilgrim · April 8, 2013, 09:42 PM

Just received an order of H110 and Universal from Powder Valley that I ordered 2-3 months ago. They seem to be getting small number of powders in that are sold out within a few hours. It has been so long since I ordered this that it was a pleasant surprise to find it on my doorstep.

droptrd · April 8, 2013, 09:53 PM

Megasports. Small and large pistol primers

Diamond K Brass - 1000ct 45acp once fired brass

trapper300RUM · April 9, 2013, 01:14 AM

Dag has Tula Primers @ normal prices but the only sell by the case of 5,000 but they have Tula Primers Instock & Dag only charges the $25.00 Haz-Mat fee & no other S&H a case of 5,000 Tula Small Pistol primers are $142.99 per case & thats about $28.40 per 1,000 You must send Dag Ammo a copy of your valid ID & fill out a affidavit that youre of ag to buy ammo & primers
http://www.dagammo.com/shop/. I am gonna try & order some in the next month or two

Gster · April 9, 2013, 05:18 AM

Lgs a week ago I picked up 200 Win. 115 gr. fmj bullets in 9mm. Yesterday a pound of Titegroup.

March 30, 2013, 11:00 PM	#1
j357 Senior Member Join Date: January 25, 2009 Location: Liberty Twp, OH Posts: 283	What Components did you Find Today? Give up your source if you are stocked up. I went out today to get a few components in the Northern Cincinnati area. I expected to be come back empty handed but had to get out for a drive. I managed to purchase 1 of several bricks of primers behind the counter at Target World. I got 1k CCI LR Primers @ $32+Tx which was amazing given the $47 price they had on several boxes of Vance lead pistol bullets I recently paid in the neighborhood of $$35 for. I passed on those and the average of $24 lb for powder they had in limited supply. (I hate going into this place, I get a sharp acidic taste in my mouth, but at least they had some supplies.) I then went up to South Lebanon to the Country Attic and found the powders I have been wanting. HP38 and Universal at $20 a pound. They had little to no bullets for pistol or rifle, but a good supply of BR-4 and LPM primers. Had a good trip overall and plan to start my first work on a new project in 30-30 WCF loading tomorrow. Hope this helps.

March 31, 2013, 12:06 PM	#3
arizona98tj Senior Member Join Date: December 10, 2007 Location: Arizona Posts: 980	I picked up some large pistol primers at the local Cabela's (Glendale, AZ) a week ago Saturday. They had about 60 bricks on the shelf....a day later, when I went back to pick up a order that I had shipped to the store, I checked the shelf and there were still a half dozen bricks. I was amazed they had lasted 24 hours over the weekend. They have sporadically had powder on the shelf, typically brands I don't use or am not even familiar with. __________________ stu-offroad.com Largest Jeep TJ project site on the web! (now with guns)

March 31, 2013, 01:33 PM	#4
Beanie-Bean Member Join Date: October 4, 2011 Location: Central TX Posts: 87	Montana Gold Just ordered 2000 .400 CMJ bullets from Montana Gold __________________ Ammo by Dillon and Hornady

March 31, 2013, 02:15 PM	#7
MEATSAW Senior Member Join Date: May 1, 2009 Location: Burnet, TX Posts: 727	just got 1500 hornady .224 55gr softpoints for my AR. That should keep me busy while this thing blows over __________________ Veteran OEF (2002) and OIF1 (2003) - US Army Member of the Burnet Gun Fighters, Inc. and of course the NRA Oregon State University alum -- Go Beavs!

March 31, 2013, 08:25 PM	#9
black mamba Senior Member Join Date: September 13, 2011 Location: SW Florida Posts: 890	wrong post Last edited by black mamba; April 1, 2013 at 07:37 PM.

March 31, 2013, 10:41 AM	#2
t45 Senior Member Join Date: January 29, 2010 Location: Foothills, NC Posts: 782	1000pcs of Winchester 223 brass. I never left the porch. UPS is my friend.

March 31, 2013, 01:43 PM	#5
lamarw Senior Member Join Date: April 12, 2010 Location: Lake Martin, AL Posts: 3,311	Received a thousand pieces of .380 brass from my postman yesterday ("Today" per title of yesterday's post). I was criticized by another forum member a month ago for posting about getting ammo stuff on a different day than his "Today" titled post. It was more than funny since that post stayed active for a month. Sorry, I am not stocked up and don't want to reveal my source.

March 31, 2013, 02:02 PM	#6
Burly Junior Member Join Date: February 3, 2013 Location: Kalifornia Posts: 6	We've been doing ok on powder at the local Basspro. Its not a solid supply but a good varity has been trickling in if you're able to get in there when the doors open. Here's a hint, if there's more than 10 people standing at the door waiting for it to open, somebody knows something showed up lol. In the past two months I've seen magnum pistol primers on the shelf twice and in very limited quantity. Nothing else as far as primers go. Still making my rounds to the local shops when I can to try and scrounge some supplies up.

March 31, 2013, 06:58 PM	#8
chiefr Senior Member Join Date: January 27, 2010 Location: AR Posts: 1,401	All I could find was: Out of stock, no backorder Out of stock, backorder OK Call for availabilty Item backordered Sold out Shipment due in Jun-July 2013

March 31, 2013, 08:29 PM	#10
drklude Member Join Date: January 30, 2013 Posts: 40	Just yesterday I got the 1000 124 gr. of 9mm FMJ bullets from precision delta that I ordered about two months ago.

April 1, 2013, 05:00 PM	#11
Kevin Rohrer Senior Member Join Date: May 19, 2010 Location: Medina, Ohio Posts: 1,049	J357: If you were in my area, I could recommend several locations that are well-stocked. __________________ Member: Orange Gunsite Family, NRA--Life, ARTCA, and American Legion. Caveat Emptor: Cavery Grips/AmericanGripz/Prestige Grips/Stealth Grips from Clayton, NC. He is a scammer

April 1, 2013, 05:03 PM	#12
hooligan1 Senior Member Join Date: July 18, 2010 Location: Independence Missouri Posts: 4,585	I got bullets and brass from MidSouth Shooters Supply, ordered it friday before last and got it last friday. __________________ Keep your Axe sharp and your powder dry.

April 7, 2013, 04:24 PM	#13
rlc323 Senior Member Join Date: January 23, 2013 Location: Forgottonia, Il Posts: 217	Recobs Winchester Small Pistol Primers in stock, at least for now. Sun 4 pm. http://www.recobstargetshop.com/browse.cfm/4,533.html

April 7, 2013, 06:38 PM	#15
Vettebeach Junior Member Join Date: March 2, 2013 Location: Gulf Coast Posts: 10	Thanks! Thanks, RLC323! __________________ Which way to the beach?

April 7, 2013, 06:40 PM	#16
m&p45acp10+1 Senior Member Join Date: May 3, 2009 Location: Central Texas Posts: 3,930	I found 55 pieces of .357 Mag brass. My source was a guy at the range that gave me his brass after he shot it . I let him shoot a couple of my guns as well. __________________ No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.

April 7, 2013, 07:52 PM	#17
Crashbox Senior Member Join Date: November 3, 2009 Location: Lynden, Washington Posts: 199	This past Thursday I received (1000) .357 Magnum cases from Starline. About ten days prior they shipped the (500) .38 Special +P's I ordered for making Speer shotshell snake shredders. __________________ Four Rugers, three SIG Sauers, assorted rifles. NRA, GOA and SAF Life Member.

April 7, 2013, 08:55 PM	#18
Beginner 1960 Member Join Date: March 11, 2012 Location: East TN Posts: 47	Got 2lbs of bluedot at bass pro last weekend,was looking for 2400 but these days make do with what u can find

April 7, 2013, 09:43 PM	#19
rlc323 Senior Member Join Date: January 23, 2013 Location: Forgottonia, Il Posts: 217	Swampman: I didn't buy any as I have a decent supply. HazMat from Recobs is usually $27.50 by UPS but since I live within the delivery area of Spee-Dee delivery out of Wisconsin I usually end up paying $14 to ship powder or primers.

April 8, 2013, 03:53 PM	#20
coldbeer Junior member Join Date: February 21, 2012 Location: Woodhaven MI Posts: 477	I went to shooters service looking for some H110 but any other magnum handgun powder like 2400, imr4227 or w296 would of been fine. I was expecting to leave dissapointed, but I left with what might be the last # of H110 for sale in the entire state. I feel like I won the lottery. I also bought two packs of CCI small rifle primers from van born gunshop last week. They've somehow managed to have primers in stock throughout the current panick event which is amazing. Both places are in southeast mi and they still have supplies but it's best to call first. Last edited by coldbeer; April 8, 2013 at 08:55 PM.

April 8, 2013, 09:15 PM	#21
B.Bonham Junior Member Join Date: June 12, 2011 Posts: 5	I found some small rifle primers in stock at Midway today - bought 2000 or 2 box's of them. They are Winchesters . That should keep my Contender .357 Mag. loaded up for Sunday afternoons for at least a year of plinking. I prefer CCI or Federal but, you can't be too picky these days... Dang hoarders! Now I am having fun bringing out the pair of 1858 Remington New Army's these days - everyone is impressed with them. My current favorite plinking Recipe is a 38 spl. cartridge with 4.3 grains of Unique powder and a 125 grain SWC lead bullet. Very nice "flat shooting" and cheap to practice with. Not as cheap as a Federal 550 or a 525 .22 cal box - but still, very affordable. I only have one rule... "Most of all - Have fun!" Weasel

April 8, 2013, 09:42 PM	#22
NWPilgrim Senior Member Join Date: September 29, 2008 Location: Oregon Posts: 2,346	What Components did you Find Today? Give up your source if you are stocked up. Just received an order of H110 and Universal from Powder Valley that I ordered 2-3 months ago. They seem to be getting small number of powders in that are sold out within a few hours. It has been so long since I ordered this that it was a pleasant surprise to find it on my doorstep.

April 8, 2013, 09:53 PM	#23
droptrd Senior Member Join Date: September 22, 2011 Location: Illinois Posts: 342	Megasports. Small and large pistol primers Diamond K Brass - 1000ct 45acp once fired brass

April 9, 2013, 01:14 AM	#24
trapper300RUM Member Join Date: February 19, 2013 Location: Va Posts: 39	Dag Ammo Dag has Tula Primers @ normal prices but the only sell by the case of 5,000 but they have Tula Primers Instock & Dag only charges the $25.00 Haz-Mat fee & no other S&H a case of 5,000 Tula Small Pistol primers are $142.99 per case & thats about $28.40 per 1,000 You must send Dag Ammo a copy of your valid ID & fill out a affidavit that youre of ag to buy ammo & primers http://www.dagammo.com/shop/. I am gonna try & order some in the next month or two

April 9, 2013, 05:18 AM	#25
Gster Senior Member Join Date: September 2, 2012 Location: N.central Pa. Posts: 302	Lgs a week ago I picked up 200 Win. 115 gr. fmj bullets in 9mm. Yesterday a pound of Titegroup. __________________ Gun control means: Being able to hit what you are shooting at.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search