The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools Search this Thread
Old January 29, 2013, 10:43 AM   #1
Cypher7810
Junior Member
 
Join Date: January 29, 2013
Posts: 3
First time suppressor purchase

This will be my first suppressor and I want to make sure I can get all I can the first time and buy once cry once. I have been looking at the Liberty Mystic and the Sparrow and all kinds of suppressors, its very confusing to make sure I am getting the right thing.

Let me start with basically what I will be shooting from

Sig Sauer P226 Combat
Sig 516 Piston AR 223 and have .22 conversion kit

These are the main two I will be firing from.

I was interested in the Mystic as it is user serviceable and handles all the calibers I need. I will be shooting 9mm, 223, and 22 through my conversion kit.

1) Should I look at something that will shoot all, or get something that shoots .223 and .22 that can be cleaned since I can get a .22 barrel for the p226, or should I look at the mystic because it also does 9mm?

2) I will mostly shoot .22 and some .223 should I just get a dedicated .22 or a .223 that I can clean, and if so what are some recomendations?

3) What has the easiest set up? as in how many different attachments do I need to go between both guns I would like to be able to put it on the AR and on the pistol. Do I need a booster for the pistol on .22? and then a fixed for the AR?

4) If I go with just a .22 now and later get a 5.56/.223 can later can the 5.56 can screw on to the same attachement as the.22?

Sorry if I am missing any parts and any help will be greatly appreciated. Like I said this will be my first purchase, and I want to do it right and know what all exactly I need to get and get the most bang for my buck. I have looked at countless threads and been doing alot of research on Gemtechs, YHM, Liberty, Silencerco and so forth. My main goal is to shoot from both guns, weither it be strictly .22 or multicaliber.

Thanks again for any help.
Cypher7810 is offline  
Old January 30, 2013, 02:21 AM   #2
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 704
It's a poor .223 silencer at best, and a broken .223 silencer at worst. Is low rate of fire and cooling breaks what you are looking for?


There has been a lot of interest in using this unit on 223 rifles as well as the intended caliber. It can be used on 223 under limited
conditions. Low rates of fire with cooling periods and no mirage covers. The use of a mirage cover will hide the obvious indicator of
the unit getting hot by producing mirage. This is a great indicator to let the shooter know that the can needs to cool off. Also, in 223
the barrel must be at least 16" in length.
David Hineline is offline  
Old January 30, 2013, 10:00 AM   #3
Cypher7810
Junior Member
 
Join Date: January 29, 2013
Posts: 3
I actually just found out that innovative arms is up the road from me and they will let you try them in person. I am thinking of trying that and see how I like them. I have seen some good reviews, does anyone have any experience with them?
Cypher7810 is offline  
Old January 31, 2013, 02:55 PM   #4
Liberty Suppressors
Member
 
Join Date: November 29, 2012
Posts: 16
If you live anywhere near Trenton, GA your more than welcome to come try all the suppressors that we have.
Liberty Suppressors is offline  
Old February 1, 2013, 11:54 AM   #5
hulley
Senior Member
 
Join Date: November 9, 2008
Location: Hoschton, Ga.
Posts: 726
I have a SS Sparrow and its awesome! I also purchased recently an AAC 762-SDN-6 to be used on my SBR 5.56 and a soon to be built .308 bolt action. The SDN-6 is more than tough enough for 5.56 action.
__________________
Nov 2, 2011 sent form 4, SS Sparrow. Arrived May 29, 2012.
Jan 30, 2012 sent form 1 for SBR. Arrived July 12, 2012
Jan 22, 2013 Sent form 4, 762-SDN-6. Arrived Sept 13, 2013
hulley is offline  
Old February 7, 2013, 12:08 AM   #6
KO3422
Senior Member
 
Join Date: March 6, 2011
Posts: 124
FWIW, you'll always get the best performance from a dedicated can. With that being said, if you're looking for the most bang for you buck, a quality .22 can is hard to beat. Liberty has some awesome cans and are multicaliber rated as well.
KO3422 is offline  
Old February 11, 2013, 11:12 AM   #7
Cypher7810
Junior Member
 
Join Date: January 29, 2013
Posts: 3
Thanks for the info. If I went with a .22 supressor, would I be able to easily use it on my sig516 with a 22 conversion bolt as well so I can shoot .22 out of it suppressed?
Cypher7810 is offline  
Old February 11, 2013, 09:09 PM   #8
hulley
Senior Member
 
Join Date: November 9, 2008
Location: Hoschton, Ga.
Posts: 726
I use my SilencerCo. SS Sparrow on a bolt action rifle, AR-15 with a dedicated .22lr upper and a Ruger MKIII (no longer owned). Not sure the suppressor your asking about but I would say its probably fine. That the beauty of a .22lr suppressor.
__________________
Nov 2, 2011 sent form 4, SS Sparrow. Arrived May 29, 2012.
Jan 30, 2012 sent form 1 for SBR. Arrived July 12, 2012
Jan 22, 2013 Sent form 4, 762-SDN-6. Arrived Sept 13, 2013
hulley is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.06626 seconds with 10 queries