|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
July 11, 2013, 01:23 PM | #1 |
Senior Member
Join Date: December 27, 2009
Location: Northeast, Maryland
Posts: 441
|
Will these rings work on a NEF Handi Rifle?
So I bought the wrong rings for another gun, already opened them. Was looking at getting a NEF Handi Rifle in .223 and an extra .30-30 barrel. Here are the rings: http://www.midwayusa.com/product/678...s-gloss-medium
and this is the scope I have for the rifle: http://www.midwayusa.com/product/398...-reticle-matte please let me know and thank you.
__________________
ANTI-GUN is ANTI-AMERICAN! |
July 11, 2013, 01:48 PM | #2 |
Senior Member
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,401
|
Edit: Scratch my previous comments.
I think those rings are too short. The hammer spur will likely contact the eyepiece of the scope. You may be able to find some one else using those rings on the greybeard Handi-Rifle forums, or the NEF/H&R forum at marlinowners, if you want a better answer.
__________________
Don't even try it. It's even worse than the internet would lead you to believe. Last edited by FrankenMauser; July 11, 2013 at 01:54 PM. |
July 11, 2013, 04:15 PM | #3 |
Senior Member
Join Date: December 27, 2009
Location: Northeast, Maryland
Posts: 441
|
Thanks for the response.
__________________
ANTI-GUN is ANTI-AMERICAN! |
July 13, 2013, 04:44 PM | #4 |
Senior Member
Join Date: December 14, 2004
Location: Maine
Posts: 3,694
|
I had some low rings for my Handi Rifle, using an older Bushnell 3-9. I ground the hammer spur and the very end of the hammer and it barely clears now. The rifle was used and I had the scope and mounts and didn't care about what it looks like (a grandkids "expendible" rifle).
|
Thread Tools | Search this Thread |
|
|