|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
August 22, 2011, 08:36 AM | #1 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
S&W i-Bolt Replacement Stock
Here's the deal, I have a new in the box S&W i-Bolt rifle in 30-06.
I happen to greatly dislike synthetic stocks, which is the only way they were shipped AFAIK. I was hoping to find a laminate wood stock for the rifle at a reasonable price. I contacted Boyd's, but they have no plans to produce one since there isn't much demand. I have found a couple of other stock makers via Google and none list a stock for the i-Bolt. I have also found some custom builders but the $$ are too steep for my back pocket. Anyone know of an after market laminate stock for this rifle that will fit a Boyd's price budget?
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 23, 2011, 08:44 AM | #2 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Wow. I never would have thunk it....
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 23, 2011, 01:01 PM | #3 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Richards MicroFit makes semi-finished laminate stocks for just about anything, priced from about $70 to severall hundred $$. Like most stockmakers (as well as S&W), they do not list the i-Bolt for inletting, but you might try calling them.
http://www.rifle-stocks.com/economy_line_styles.htm
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
August 23, 2011, 03:27 PM | #4 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
Thanks Scorch, They are on the list for further contact.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 24, 2011, 12:11 PM | #5 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
So the effort in futility goes onward and no where.
None of the aftermarket stock manufacturers I have contacted, Boyd's/Richard's/Stocky's/Wenig have anything for the i-Bolt action and didn't want to discuss it either. So, how about this: Is there someone in the North Central Texas area that can take a blank and make a stock at a reasonable price? Material would be a Birch laminate and I'd prefer either a copy of the factory or a Monte Carlo style.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 30, 2011, 06:04 AM | #6 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
OK, a small update from internet research. It seems that the i-Bolt may "share" the same receiver dimensions as the Remington 700. To prove or disprove this, my LGS is going to test fit the S&W action in a Remington take-off stock today. We shall see what happens and I'll pass the results along.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
August 30, 2011, 12:21 PM | #7 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
UPDATED INFORMATION!
Just got back from the LGS. The S&W i-Bolt fits with no issues into a Remington 700 BDL Long Action factory wood stock. The Smithy removed the action, magazine insert and trigger guard from my S&W synthetic stock and everything dropped right into place. So the solution to anyone wanting to replace the ugly S&W stock on a 30-06 i-Bolt is to get a Remington 700 BDL LA stock and proceed from there. Bedding, free floating, etc..
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
October 3, 2011, 09:22 PM | #8 |
Senior Member
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,860
|
'nuther update
Rifle looks good, Cowtowner. Guess I should have taken a picture yesterday.
__________________
Life Member NRA, TSRA Smokeless powder is a passing fad! -Steve Garbe I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove My favorite recipes start out with a handful of used wheelweights. |
October 5, 2011, 07:02 AM | #9 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
TXGunNut, Let's see if I can add one or link to it. Sorry about the mess on the bench folks.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
October 5, 2011, 10:49 AM | #10 |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
That looks pretty nice, CowTowner. How about a range report?
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
October 5, 2011, 11:32 AM | #11 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
The last cold bore shot at 100 yards, done Saturday morning @ 7:30 AM CDT using Hornady 165 grain SPBT factory ammo, hit 1/4" high and 1/4" right of center. It is in the safe and ready for hunting season.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
October 9, 2011, 11:18 AM | #12 |
Senior Member
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,860
|
Messy bench? Mine doesn't usually look anywhere near that neat. I pulled the sock off Boomer for the pic to make it a little purtier.
Guess he's not going to the range after all today. Loving this rain, tho!
__________________
Life Member NRA, TSRA Smokeless powder is a passing fad! -Steve Garbe I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove My favorite recipes start out with a handful of used wheelweights. |
November 30, 2012, 08:11 AM | #13 |
Junior Member
Join Date: November 30, 2012
Posts: 1
|
S&W I bolt stock
I was wondering, if it fits the 700 bdl la wood stock do you think will for their synthetic stocks.
|
November 30, 2012, 01:01 PM | #14 |
Senior Member
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,747
|
I see no reason for it not to fit a Remington synthetic stock. As long as the stock is from/for a 700 BDL LA.
The point of my project and search was to get rid of the synthetic stock. I simply don't like them. But if you want a factory replacement, PM me. I still have my S&W factory take off.
__________________
NRA Chief Range Safety Officer, Home Firearms Safety, Pistol and Rifle Instructor “Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life......” President John F. Kennedy |
Thread Tools | Search this Thread |
|
|