|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 31, 2012, 03:57 PM | #1 |
Senior Member
Join Date: August 9, 2011
Posts: 1,250
|
Blackhawk surgery went well
I almost didn't cut her. She was in much better shape than my Vaquero but accuracy still wasn't what I desired. As you can see some metal was removed and she's a true .4525 in each hole now.
|
December 31, 2012, 04:17 PM | #2 |
Senior Member
Join Date: July 14, 2008
Location: South Carolina
Posts: 2,918
|
Nice job, I have been needing to do mine for some time now but have not bought the tools yet, I hope I will get it done in 2013. I got 3 to do (Blackhawk, Redhawk & Vaquero) Be sure to let us know how well she shoots now.
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are |
January 1, 2013, 09:03 PM | #3 |
Senior Member
Join Date: August 9, 2011
Posts: 1,250
|
I'm happy to report it shoots way better. Maybe someday Ruger will learn how to build them this way from the factory.
With my vaquero I was getting weird blobs of bullet lube on the target. What I think was happening was the bullet was getting swaged down so much that it squeezed the lube out as it exited the cylinder then it was shot out behind the bullet. For the blackhawk it went from being on a paper plate to grouping the size of a fist. A 50% improvement I'd say. I've got pictures but they will have to wait. |
January 2, 2013, 05:35 PM | #4 |
Senior Member
Join Date: July 14, 2008
Location: South Carolina
Posts: 2,918
|
Out standing, I'm glad to hear the good news. Now I will have to get off my butt and get this done. Where did you get your cutter? Brownells?
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are |
January 2, 2013, 06:46 PM | #5 |
Senior Member
Join Date: June 15, 2002
Location: Montana
Posts: 147
|
My concern about doing this myself was keeping the cutter true and lined up properly. I admit I chickened out and sent mine to Cylindersmith. I might have changed my mind if I'd needed more than one cylinder done.
A hat tip your way.
__________________
"What kind of man would put a known criminal in charge of a major branch of government? Apart from, say, the average voter." - Terry Pratchett |
January 2, 2013, 09:40 PM | #6 |
Senior Member
Join Date: August 9, 2011
Posts: 1,250
|
Yup, got everything from Brownells. I would highly recommend getting the pilot kit. It comes with a bunch of different sizes so you can find the best fit for each hole, and they most likely will be all a little different.
If your pilot is snug then it's hard to mess up. Just be very generous with the drill-do and give it steady pressure. I will say the T-handle I bought didn't work. That's why I have that chuck. I didn't mount it to a drill, I just used my hands but the chuck held the bit tight. I made a few videos when I did my Vaquero http://youtu.be/FTb9cNKNavQ http://youtu.be/V9ySs13OinA You know you can't own just one .45 revolver. If you ream two then it's paid for itself. You also get the satisfaction of learning a new skill and remember no one treats your stuff as good as you do. |
January 3, 2013, 09:37 AM | #7 |
Senior Member
Join Date: July 14, 2008
Location: South Carolina
Posts: 2,918
|
Excellent, thanks for the videos.
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are |
January 5, 2013, 03:10 AM | #8 |
Senior Member
Join Date: June 4, 2012
Location: NV
Posts: 743
|
Have you fire lapped the barrel?
|
January 5, 2013, 04:11 AM | #9 |
Senior Member
Join Date: November 7, 2011
Location: Earth
Posts: 446
|
Does a redhawk .44 need this?
__________________
...They have the internet on computers now....-Homer Simpson- |
January 5, 2013, 03:15 PM | #10 |
Senior Member
Join Date: August 9, 2011
Posts: 1,250
|
I haven't fire lapped the barrel. The accuracy now is good so I don't find a need for it.
Budda, I don't know if your gun needs it or not, but you can try sticking an unloaded bullet in your cylinder, if it fits then you should be good, if not you can find a reamer for just about any caliber. I hear Ruger does better with their .44's. |
January 6, 2013, 03:43 AM | #11 |
Senior Member
Join Date: May 19, 2004
Location: Fairbanksan in exile to Aleutian Hell
Posts: 2,655
|
I did the same thing to my Redhawk last year. I did cut a piece of .45-70 brass to line the chamber with before I opened the throats up.
__________________
Stop Allowing Our Schools To Be Soft Targets! http://fastersaveslives.org/ East Moose. Wear Wolf. |
January 6, 2013, 07:11 AM | #12 |
Senior Member
Join Date: October 3, 2005
Location: Vermont
Posts: 288
|
Boy that looks familiar! I've had to do that with every Ruger 45 Colt that I have, and I have a few! I makes a big difference when shooting cast bullets. I have a Redhawk 7.5" in 45 Colt coming in next week and I am sure I will need to do the same with that.
Ruger does get the 44's right. The only one I've had that was slightly tight was one of the recent SBH's that Talo had run with the 3.75" barrel. |
January 7, 2013, 06:35 PM | #13 |
Senior Member
Join Date: July 14, 2008
Location: South Carolina
Posts: 2,918
|
I just got my order in today, I hope my project comes out as nice.
__________________
We know exactly where one cow with Mad-cow-disease is located, among the millions and millions of cows in America, but we haven't got a clue where thousands of illegal immigrants and terrorists are |
|
|