|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
March 26, 2010, 12:13 PM | #1 |
Senior Member
Join Date: February 29, 2008
Posts: 307
|
Need help with a Holo or Red Dot for this scope
Trying to find as holo or red dot to go on the pictured scope. I have two questions
1-If I place it that far above the bore will I ever be able to zero it? 2-Not looking to spend alot on one is there any available. Problem I also have is that the adjusting knobs prevent me from slipping on the mount, so it would have to be able to remove the one side and then replace the side portion(hope I am making sense decribing that) to mount. The sight would have to be at least 1" total height to clear the rear adjusting knob. Hope this doesn't sound to off the wall. Any suggestions would be greatly appreciated. Thanks Last edited by gilfo; March 26, 2010 at 12:55 PM. |
April 4, 2010, 04:30 PM | #2 | |
Member
Join Date: May 24, 2009
Location: Texas
Posts: 24
|
I don't know how good of quality this is, but it should work for what you want:
http://www.opticsplanet.net/ncstar-r...ount-dmp5.html http://cgi.ebay.com/ws/eBayISAPI.dll...=263602_263622 Oh, and with the riser you can use pretty much any sight because the clamp no longer has to be removed.
__________________
http://i.imgur.com/ihNhw.jpg Quote:
|
|
Thread Tools | Search this Thread |
|
|