May 1, 2000, 11:51 AM | #1 |
Staff Alumnus
Join Date: February 23, 1999
Location: Denver, CO
Posts: 4,272
|
Had a problem with my 92FS this weekend: on occasion, the hammer would drop back to DA after a shot. Worn sear and/or hammer engagement surface?
|
May 1, 2000, 01:56 PM | #2 |
Member
Join Date: April 20, 2000
Location: Driggs, Idaho
Posts: 74
|
If the hammer is following the slide it is most likely a worn sear and/or hammer notch. Have it looked at by a qualified smith.
|
May 1, 2000, 04:36 PM | #3 |
Senior Member
Join Date: April 6, 2000
Location: PA
Posts: 3,451
|
I concur on the 'smith, something is wrong.
|
May 1, 2000, 04:48 PM | #4 |
Staff Alumnus
Join Date: February 23, 1999
Location: Denver, CO
Posts: 4,272
|
Thanks, guys. I do my own smith.stuff (and no, I don't take it to a real smith when I break it even worse ). I've ordered a new sear and hammer from Brownell's. I haven't taken the pistol all the way down since I got back from the range, so I'm just guessing at the cause, but having the spares around can't be a Bad Thing.
|
Thread Tools | Search this Thread |
|
|