|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
June 20, 2005, 05:46 PM | #1 |
Senior Member
Join Date: February 18, 2005
Posts: 1,874
|
2 inch barrel fast or slow powder
Got thinking this afternoon have a 9MM with a short 2inch barrel.Should you use a faster or slower burning powder.Don't think I have ever seen this guestion before.With a little longer barrel may not make any difference but a very short it might.With slow burning powder bullet may be out of the barrel before it all burns.This is what I get for thinking
__________________
Russ5924 |
June 20, 2005, 06:03 PM | #2 |
Senior Member
Join Date: August 11, 2001
Location: Utah
Posts: 1,462
|
You are correct-generally.
However the slower powders will still get you more velocity than faster powders, just at the expense of more flash/blast.
__________________
From my cold dead hands......... NRA certified rifle, pistol and shotgun instructor. Hunter education instructor |
June 20, 2005, 08:35 PM | #3 |
Senior Member
Join Date: May 26, 2000
Location: Hastings, Nebrasksa - the Hear
Posts: 2,209
|
Depends on bullet weight.
Ligher bullet needs faster powder.
Heavier bullet needs slower powder. Barrel length really doesn't play into powder speed selection.
__________________
There ain't no free lunch, except Jesus. Archie Check out updated journal at http://oldmanmontgomery.wordpress.com/ |
June 20, 2005, 09:28 PM | #4 |
Senior Member
Join Date: June 21, 2002
Posts: 2,019
|
The powders that give top velocities in a 5" barrel are still going to give the top velocities in a 2" barrel, this has been proven many times. Ben is also right that the slower powders can give more flash and more muzzle blast than the faster powders. More flash isn't a hard and fast rule as some powders flash brilliantly and some don't, but in nearly all cases with increased velocity blast will increase just as it usually decreases as barrels get longer.
|
June 21, 2005, 07:58 AM | #5 |
Senior Member
Join Date: May 29, 2004
Posts: 145
|
Well, I can't verify this but my understanding is that slow powders in a short barrel continue to burn as the bullet exits the muzzle possibly upsetting its trajectory. Personaly, I use light bullets/fast powders out of my short barrel with better results than light bullets/slower powders. However, as mentioned, regardless of barrel length, faster velocities will be achieved with slower powders. The "light bullet/fast powder out of short barrels" equation, works for me in 45 ACP.
Crazylegs |
June 21, 2005, 03:55 PM | #6 |
Senior Member
Join Date: May 19, 2004
Location: Wabash, IN
Posts: 227
|
Well.................
I know in loading for my 2" and 4" .38Spcl revolvers, I tend to get better accuracy out of the snubbie when using faster powders. this is using 158gr bullets - whether cast, plated, or jacketed. I haven't really experimented with lighter bullets in the snubbie, other than the 145gr Win Silvertips that I load for both............however I've never been able to get what I considered acceptable accuracy out of the snubbie with the 145s. Maybe someday I'll get around to trying some 125s just to see. I did try a box of factory 140gr XTPs to try and their accuracy was BAD - just too hot for that little gun to handle.
__________________
"Every moving thing that liveth, I give unto you as meat" (Gen 9:3) Aim small.........miss small. Trust God..........but keep your powder dry! |
Thread Tools | Search this Thread |
|
|